Atlona AT-HD-V12 User manual

AtlonA
1 IN 2 OUT HDMI v1.3 SPLITTER
AT-HD-V12
User Manual

TABLE OF CONTENTS
1. Introduction .................................................. 1
2. Features and Contents .................................................. 1
3. Illustration .................................................. 2
4. Connection and Installation ....................................... 2
5. Connecting and operation ....................................... 3
6. Attentions .................................................. 3
7. Safety .................................................. 4
8. Warranty .................................................. 5

Introduction
FEATURES AND CONTENTS
Congratulations on your purchase of the AT-HD-V12 Splitter. Your satisfaction is very impor-
tant to us. Our series of HDMI Switchers and Splitters are designed to make the use of your
HDTV equipment more comfortable, productive and affordable.
The AT-HD-V12 allows one HD source device to support up to two HDTV displays. Both HDTV
displays will have the same quality image as the source.
The amplifier and equalizer functions offer solutions for Home Theater, AV installation data
center, information distribution, conference room presentation, school and corporate training
environments.
For the best performance of this HDMI splitter box, please read this manual carefully and keep
it for further information.
Features:
• Fully support 1080p HDTV
• Fully Support HDMI version 1.3
• Support HDCP compliant devices
• Gold plated connectors
• Maintains same image quality as source, up to 1080p
• Amplifier and Equalizer functions enable longer HDMI Cable
• Expand 2 HDMI outputs of your High-definition Source
• Fashionable metal housing design, free of interference
Content of Package
• DC 12V Power Adaptor
• AT-HD-V12 Splitter main unit
• User’s manual
1

2
ILLUSTRATION
Connection and Installation
Front Panel
Rear Panel
Blue-ray DVD player
HDTV Display
OUT 1
HDTV Display
OUT 2
AT -HD-V12
V1.3
1 IN 2 OUT HDMI V1.3 SPLIT T E R
DC 12V
DC 12V

3
CONNECTING AND OPERATION
ATTENTIONS
Connect the AT-HD-V12 Splitter to your devices
1. Connect the HDMI cable from the HD source to the input port of AT-HD-V12 Splitter.
2. Connect the HDMI cables from your displays (monitor or projector) to the outputs of the AT-
HD-V12 Splitter.
3. Standard resolution of outputs set up:
Please set the output resolution of the source device first, and make sure the resolution can
be displayed on all connected display devices. For example, if you set the output resolution
of the source device to 1080p, please make sure all the display devices can display 1080p
resolution. If any connected display device cannot support 1080p resolution, the display
device will show no pictures.
4. Plug the 12VDC power supply into the AT-HD-V12 Splitter.
5. When connections are completed, the HDTV signal will be distributed to each HDTV dis-
play.
6. For the best performance, you should re-start the AT-HD-V12 splitter power to make sure
the AT-HD-V12 is working well in HDCP between HD player and Display devices, when the
HDMI cable was disconnected after your last use.
• AT-HD-V12 will distribute one resolution only at one time. Please set the output resolution
of the source device first, and make sure the resolution can be displayed on all connected
display devices.
• The resolution mode will depend on the first plug-in or first of the sequent display devices that
can successfully communicate with the source devise. Make sure your display devices can
support the highest resolution as the source device can support, and your display devices are
HDCP compliant and fully support HDCP.
• If the AT-HD-V12 is connected to multiple HDTVs which support different highest resolution
(720p, 1080i, 1080p), it is recommended to adjust the output resolution of source device to
match the resolution of HDTV that has lower resolution.
For example, the AT-HD-V12 is connected to 2 HDTVs, and one of them only supports 720p
HD resolution, but another can support up to 1080p. If you want them to show the same HD
content, please set the output resolution of source device to 720p.
• To reset the HDMI Splitter, please unplug the power adaptor, or unplug the power cord from
DC jack; and then plug it back.

4
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug.
Doing so will void the warranty and safety
features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in case it requires
disconnection.
Precautions
FCC Regulations state that any
unauthorized changes or modifications to
this equipment not expressly approved by
the manufacturer could void the
user’s authority to operate this
equipment.
Operate this product using only the
included external power supply. Use of
other power supplies could impair
performance, damage the product or cause
fires.
In the event of an electrostatic discharge,
this device may automatically turn off. If this
occurs, unplug the device, and plug it back
in.
Protect and route power cords so they will
not be stepped on or pinched by anything
placed on or against them. Be especially
careful of plug-ins, or cord exit points from
this product.
Avoid excessive humidity, sudden
temperature changes or temperature
extremes.
Keep this product away from wet locations
such as bathtubs, sinks, laundries, wet
basements and swimming pools.
Use only accessories recommended by
ATLONA to avoid fire, shock or other
hazards.
Unplug the product before cleaning. Use
a damp cloth for cleaning. Do not use
cleaning fluid or aerosols, which could
enter the unit and cause damage, fire or
electrical shock. Some substances may
also mar the finish of the product.
Never open or remove unit panels or make
any adjustments not described in this
manual. Attempting to do so could expose
you to dangerous electrical shock or other
hazards. It may also cause damage to your
AT-HD-V12. Opening the product will void
the warranty.
Do not attempt to service the unit. Instead
disconnect it and contact your Authorised
ATLONA reseller or contact ATLONA
directly.

WARRANTY
LIMITED ONE-YEAR WARRANTY
ATLONA by Lenexpo Electronics warrants only to the initial purchaser of this product for a period of one
year from the date of purchase from an Authorized ATLONA Reseller, the product will be free of electrical
and mechanical defects that materially affect the products operation as described in this users manual.
Within this period, ATLONA will, at it’s sole option, repair or replace any components, which fail of normal
use or refund the net original price.
DISCLAIMER OF WARRANTY
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED TO ONE YEAR FROM PURCHASE; ALL OTHER EXPRESS OR IMPLIED CONDITIONS,
REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-
INFRIGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights, which vary by jurisdiction.
LIMITATION OF LIABILITY
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ATLONA OR ITS SUPPLIERS BE
LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUEN-
TIAL, INCIDENTAL, OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEO-
RYOF
LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT,
EVEN IF ATLONA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT
ATLONA’S LIABILITY TO YOU, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE),OR
OTHERWISE, EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations
will apply even if any warranty or remedy provided to you fails its essential purpose. Some jurisdictions do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of or
exclusion may not apply to you.
Disclaimer
This document is provided for technical information for the user. It does not create any warranty with re-
spect to the product, and does not modify or enhance the terms of the warranty that may accompany this
product.
ATLONA reserves the right to modify the information in this document as necessary.
ATLONA holds no responsibility for any errors that may appear in this document. Customers should take
appropriate action to ensuretheir use of the product does not infringe upon any patents. ATLONA respects
valid patent rights of third parties.
Trademarks and Copyrights All other product names or marks referenced herein are trademarks or regis-
tered trademarks of their respective owners. ATLONA
2151 O’toole Ave, Ste D
San Jose CA 95131
Toll Free: 1-877-536-3976
International: 408-954-8782
FAX: [phone]
Website: www.atlona.com
E-MAIL: [email protected]
5