Atlona AT-HDVS-SC-RX User manual

1
Installation Guide
AT-HDVS-SC-RX
4K/UHD
Scaler for HDBaseT and HDMI with Video Wall Processing
AT-HDVS-SC-RX
1 x AT-HDVS-SC-RX
1 x Captive screw connector, 3-pin
2 x Captive screw connector, 5-pin
1 x 24 V DC power supply
1 x Installation Guide
Package Contents
The Atlona AT-HDVS-SC-RX is an HDBaseT receiver and 4K/UHD scaler with a local HDMI
input. It receives HDBaseT for video output up to 4K/30 4:4:4, plus embedded audio, control,
and Ethernet over distances up to 330 feet (100 meters). The HDVS-SC-RX features Atlona
CrystalScale technology with high quality downscaling and upscaling, as well as a host of
advanced image optimization capabilities plus video wall processing. The HDVS-SC-RX is
ideal for 4K presentation applications with HDVS-200 Series switching transmitters, EX Series
transmitters, Atlona AV switchers with HDBaseT outputs, and local HDMI sources, plus the
Gain™ 60 amplier. The HDVS-SC-RX and an HDVS-200 Series transmitter together serve as a
compact, fully automated AV system with the convenience of automatic input selection, display
control, remote transmitter powering through Power over Ethernet (PoE), and 4K/UHD scaling.
IMPORTANT: Visit http://www.atlona.com/product/AT-HDVS-SC-RX for the latest
rmware updates and User Manual.

2
Installation Guide
AT-HDVS-SC-RX
FW
AT-HDVS-SC-RX
DC 24V
1
C1 COM C2
2HDMI OUT
INPUT
RXTXTXRX
21 RL
RS-232 AUDIO OUT RELAY
ENTER INPUTMENU
< >
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4K SCALER
FW
AT-HDVS-SC-RX
DC 24V
1
C1 COM C2
2HDMI OUT
INPUT
RXTXTXRX
21 RL
RS-232 AUDIO OUT RELAY
ENTER INPUTMENU
< >
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4K SCALER
Panel Description
1 PWR
This LED indicator glows solid green when
the unit is powered. When set to standby
mode, this LED indicator glows solid
amber.
2 LINK
This LED indicator displays the link status.
3 INPUT 1 / 2
These LED indicators display the currently
selected input. The active input will be
indicated by a solid green LED.
4 MENU
Press this button to display the built-in
menu system.
5 ENTER
Press this button to conrm the
highlighted selection in the menu system.
6 UP / DOWN
Press these buttons to highlight the
desired options in the menu system.
7 INPUT
Press and release this button to toggle
between INPUT 1 and INPUT 2. The
INPUT 1 and INPUT 2 LED indicators will
toggle, based on the selected input.
8 LAN
Connect an Ethernet cable from this port
to the Local Area Network.
9 FW
Connect a mini USB cable to this port to
update the rmware.
10 HDBaseT Input
Connect a transmitter, such as the AT-
UHD-PRO3-44M, to this port using an
Ethernet cable.
11 HDMI Input
Connect a UHD/HD source to this port
using an HDMI cable.
12 HDMI OUT
Connect an HDMI cable from this port to a
display or other sink device.
13 RS-232
Connect the included 5-pin captive screw
block to this port.
14 AUDIO OUT
Connect the included 5-pin captive
screw block to this port. Refer to Audio
Output Connector (page 3) for wiring
information.
15 RELAY
Slide this switch to set the correct speaker
impedance or voltage setting.
16 DC 24V
Connect the included 24 V DC locking
power supply to this power receptacle.
Front
Rear
2
1
9 10 11 12 13 14 15 16
3 4 5 6 7 8

3
Installation Guide
AT-HDVS-SC-RX
RS-232 Connector
Audio Output Connector
The AT-HDVS-SC-RX provides RS-232 control of both the display and/or the AT-HDVS-SC-RX.
This step is optional.
1. Use wire strippers to remove a portion of the cable jacket.
2. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires.
3. Insert the TX, RX, and GND wires into correct terminal on the included captive screw block.
The AUDIO OUT connector on the AT-HDVS-SC-RX provides the ability to connect either
balanced or unbalanced audio inputs, using the included 5-pin captive screw block.
Balanced audio connections use two signal wires and a ground to minimize interference in audio
signals. Unbalanced audio connections use one signal wire and a ground and are used if system
components don’t support balanced signals.
2 1
3
2 1
3
GND GND
-
+
Rear View Rear View
-
+
GND
Side View Side View
-
+
GND
+
-
Balanced Audio using XLR Connectors
Unbalanced Audio using RCA Connectors
GND
GND
RX
TX
RX
TX
5 3 2
5 3 2
Display Control
AT-HDVS-SC-RX Control

4
Installation Guide
AT-HDVS-SC-RX
Relay
The AT-HDVS-SC-RX provides a RELAY port, allowing the control of screens, curtains, and other
devices. Use a 48 V DC relay with no more than 1 A current draw.
When the AT-HDVS-SC-RX is powered-on or rebooted, C1 and C2 are set to the Normally Open
(NO) state.
C2
COM
C1
Installation
1. Connect an Ethernet cable from the INPUT 1 port to a transmitter, such as an AT-HDVS-
200-TX.
2. Connect an HDMI cable from the INPUT 2 port to a UHD/HD source.
3. Connect an HDMI cable from HDMI OUT port to a UHD/HD display.
4. Connect an RS-232 control and/or display device to the RS-232 port using the included
5-pin captive screw block. Each RS-232 port serves a dierent function.
• RS-232 1
Used to control an external display device.
• RS-232 2
Used to control the AT-HDVS-SC-RX.
5. Connect an amplier, such as the AT-GAIN-60, to the AUDIO OUT port using the included
5-pin captive screw block.
6. Connect the relay leads from the control motors of the projection screen, blinds, or curtains,
of the relay outputs to the RELAY port, using the included 3-pin captive screw block. Use a
48 V DC relay with no more than 1 A current draw.
7. Connect an Ethernet cable from the LAN port, on the front of the unit, to a network switch
for set up and control of the unit.
8. Connect the included power supply to the DC 24V power receptacle.
9. Connect the IEC power cable to an available electrical outlet.

5
Installation Guide
AT-HDVS-SC-RX
Connection Diagrams
Standard Application
USB-CHDMI
LINK
USB-C
HDMI
PWR
RS-232
RX TX
AT-HDVS-210U-TX-WP
AT-GAIN-60
LAN
Audio
Ceiling Speakers
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
AT-VGW-250
AT-HDVS-210U-TX-WP
Laptop
AT-HDVS-SC-RX
Display
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4KSCALER
ETHERNETHDMIOUTMDPOUT DC19V
12
AT-VGW-250
HDBaseT
Ethernet / PoE
Ethernet
Audio
Control
HDMI
HDMI
Ethernet Ethernet
AT-VTP-550-BL

6
Installation Guide
AT-HDVS-SC-RX
Video Wall Application
Ceiling Speakers
AT-GAIN-120
AT-VTP-800-WH
AT-HDR-M2C
LAN
Audio
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
Generic
SPEAKERSYSTEMSSPEAKERSYSTEMS
PWR
VOLLEVEL
AUDIOAMPLIFIER
FW
SIGNAL ANALOGIN
NETAUDIODEVICEID
GAIN
TM
PC Digital Signage Player
Display
Display Display
Display
AT-VGW-250
AT-UHD-CAT-4ED
ATHDVS-SC-RX
ATHDVS-SC-RX
ATHDVS-SC-RX
ATHDVS-SC-RX
4321OUT
IN
HDMI HDBaseT LOCK INT LEARN
AT-UHD-CAT-4ED
POWER EDID
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4KSCALER
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4KSCALER
ETHERNETHDMIOUTMDPOUT DC19V
12
AT-VGW-250
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4KSCALER
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4KSCALER
Ethernet
HDMI
HDBaseT
HDBaseT
Ethernet / PoE
HDBaseT
HDBaseT
Control
Control
HDMI
HDMI
HDMI
HDMI
Control
Control
Ethernet
HDMI
Audio

7
Installation Guide
AT-HDVS-SC-RX
By default, the AT-HDVS-SC-RX is set to DHCP mode, allowing a DHCP server (if present) to
assign the unit an IP address. If a DHCP server is not found within 15 seconds, then the unit will
be placed in Auto IP mode and use a self-assigned IP address within the range of 169.254.xxx.
xxx. If DHCP or Auto IP mode are not desired, the unit can be placed into static IP mode using
the built-in menu system.
IP Conguration
1. Make sure the AT-HDVS-SC-RX is powered.
2. Connect an HDMI cable from the HDMI OUT port on the AT-HDVS-SC-RX to the HDMI
input port on a UHD/HD display.
3. Press the MENU button on the front panel of the AT-HDVS-SC-RX to display the menu
system.
4. The Change IP address should be highlighted. If not, press the UP or DOWN cursor
buttons on the front panel to select this option.
5. Press the ENTER button. The IP Mode option will be highlighted.
6. Press the ENTER button to select the IP Mode option. The IP Mode option will be
highlighted in green.
Switching the IP mode
Main menu
Change IP address
Sys reset
Select input
Select HDCP mode
Set Scaler mode
Volume up and down
Information
Exit
IP menu
IP Mode Dhcp
Static Set Ip
Byte1 High 192
Byte2 168
Byte3 1
Byte4 Low 103
Back
Exit
NOTE: The current IP address of the unit can be displayed by highlighting the
Information menu item and pressing the ENTER button.

8
Installation Guide
AT-HDVS-SC-RX
7. Press the UP or DOWN cursor buttons on the front panel to toggle between Dhcp and
Static.
8. Press the ENTER button to set the desired IP mode.
When set to Static mode, each byte of the IP address can be set: Press the UP or DOWN
cursor buttons to highlight the desired eld, then press ENTER to select the eld. Press the
UP or DOWN buttons to change the byte value. Press the ENTER button to conrm the
value.
9. Press the UP or DOWN cursor buttons to highlight Back, then press the ENTER button
to return to the main menu. Highlight and select Exit to exit without returning to the main
menu.
IP menu
IP Mode Static
Static Set Ip
Byte1 High 192
Byte2 168
Byte3 1
Byte4 Low 103
Back
Exit
For easy conguration of Atlona devices, AMS 2.0 is available from https://atlona.com/ams for
free. Two options can be used for installation: The free Linux-based software download or the
easy-to-install server hardware (AT-AMS-HW).
Once AMS has been set up:
1. Open a browser on the same network as AMS 2.0 and go to the IP address of AMS 2.0.
View the AMS 2.0 installation instructions on how to nd the IP address of the software, if
necessary.
2. Enter the login information on the AMS 2.0 web page, then click the Login button.
3. Refer to the AT-HDVS-SC-RX manual for additional information.
AMS 2.0

9
Installation Guide
AT-HDVS-SC-RX
Web GUI
The AT-HDVS-SC-RX includes a built-in web GUI, which allows easy management and control of
all features. Follow the instructions below to access the web GUI.
1. Set the IP mode of the AT-HDVS-SC-RX. Refer to IP Conguration (page 7) for more
information.
2. Connect an Ethernet cable from the LAN port on the AT-HDVS-SC-RX to the Local Area
Network (LAN).
3. Use an IP scanner to determine the IP address of the AT-HDVS-SC-RX.
4. Launch a web browser and enter the IP address of the unit.
5. The AT-HDVS-SC-RX Login page will be displayed.
6. Enter the following information on the Login page.
Login: admin
Password: Atlona
7. Click the Login button.

10
Installation Guide
AT-HDVS-SC-RX
The AT-HDVS-SC-RX includes two mounting
brackets, which can be used to attach the unit
to any at surface. Use the two enclosure
screws, on either side of the unit, to attach the
mounting brackets.
1. Using a small Phillips screwdriver, remove
the two screws from the left side of the
enclosure.
2. Position one of the mounting brackets, as
shown below, aligning the holes on the
side of the enclosure with one set of holes
on the mounting bracket.
3. Use the screws from Step 1 to attach the
mounting bracket.
4. Repeat steps 1 and 2 to attach the
second mounting bracket to the opposite
side of the unit.
5. Mount the unit to a at surface using the
oval-shaped holes, on each mounting
bracket. If using a drywall surface, a #6
drywall screw is recommended.
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4K SCALER
ENTER
INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4K SCALER
ENTER INPUT
MENU
<
>
AT-HDVS-SC-RX
PWR
LINK
INPUT
1
2
LAN
4K SCALER
NOTE: Mounting brackets can
also be inverted to mount the
unit under a table or other at
surface.
Mounting Instructions