Atlona AT-HDVS-150-TX Technical manual

1
Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
AT-HDVS-150-TX / TX-PSK
The following procedure is used for both the AT-HDVS-150-TX and the AT-HDVS-150-TX-PSK. The rmware le for
the AT-HDVS-150-TX is used for both models.
Requirements
• AT-HDVS-150-TX or AT-HDVS-150-TX-PSK
• Firmware le: AT-HDVS-150-TX_[version].bin
• USB Type A to Mini-USB Type B cable
• Computer with USB port
1. Download the latest rmware from the Atlona web site.
2. Disconnect the power to the AT-HDVS-150-TX by disconnecting the Ethernet cable from the HDBaseT OUT port
on the AT-HDVS-150-TX.
3. Press and hold the DISPLAY ON/OFF button.
4. While pressing the DISPLAY ON/OFF button, connect the USB cable from the computer to the FW port on the
AT-HDVS-150-TX. When the USB cable is connected, the PWR LED indicator will glow solid green.
5. After a few seconds, a folder with the name USB UPDATER, will be displayed. Release the DISPLAY ON/OFF
button.
FW port

2
Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
If the folder is not displayed, open Windows Explorer and locate the drive named USB UPDATER.
7. Delete all les from the USB drive, if any are present.
8. Drag-and-drop the AT-HDVS-150-TX_[version].bin rmware le to the drive.
9. After the le has been copied, disconnect the USB cable from both the computer and the AT-HDVS-150-TX.
10. Reconnect the Ethernet cable to the HDBaseT OUT port on the AT-HDVS-150-TX.
11. The update process is complete.