Atn X-trac User manual

X-TRAC

TACTICAL REMOTE ACCESS CONTROL

MANUAL

Important Export Restrictions! Commodities, products, technolo-

gies and services contained in this manual are subject to one or more

of the export control laws and regulations of the US BIS-Department of

Commerce, Export Administration Regulations. It is unlawful and strictly

prohibited to export, or attempt to export or otherwise transfer or sell any

hardware or technical data or furnish any service to any foreign person,

whether abroad or in the United States, for which a license or written

approval of the U.S. Government is required, without first obtaining the

required license or written approval from the Department of the U.S. Gov-

ernment having jurisdiction. Diversion contrary to U.S. law is prohibited.

X-TRAC REV. 1 – JAN., 2017

For customer service

and technical support, please contact

American Technologies Network Corp.

1341 San Mateo Avenue,

South San Francisco, CA 94080.

Phone: 800-910-2862, 650-989-5100.

E-mail: service@atncorp.com.

Site: www.atncorp.com

AMERICAN

TECHNOLOGIES

NETWORK CORP.

The information in this manual furnished for informational

use only, is subject to change without notice, is not to be

construed as a commitment by ATN Corp.

ATN Corp. assumes no responsibility

or liability for any errors or inaccuracies

that may appear in this book.

6. BATTERY REPLACEMENT

6.1 Unscrew the Battery using a coin or an-

other object turn counter clock wise.

6.2 Remove the CR2450 Battery

6.3 Replace with New CR2450 Battery

6.4 Replace the battery cover and turn clock

wise.

1. SPECIFICATIONS

Bluetooth 4.1

Environmental

rating Water resistant

Battery type CR2450

Controls 6 buttons and a Roller

Dimensions 3.2” x 2” x 0.8”

80 x 50 x 21 mm

Weight 1.76 oz / 50 g

Warranty 2 years

* ATN reserves the right to change the above specifications

at any time without notice.

Tactile Buttons Directional

Roller

Home Button

2. DESCRIPTION

The X-TRAC was designed to aid the shooter

in a dynamic shooting environment.

Connect via Bluetooth to your ATN Smart

Device and control all the functions and fea-

tures without touching the scope. Have all

your controls at your fingertips and never get

bogged down in a mission critical situation.

Six Tactile buttons and a Directional Roller

with Touch Feedback gives you precise con-

trol over all your features. Using your Ballis-

tic Calculator, Smart Range Finder, Environ-

mental Adjustments, etc on your Smart HD

Scopes just got easier.

3. INCLUDED

• Remote control

• Battery

• Velcro straps x 2

• Manual

4. CONNECTING THE X-TRAC

4.1 Activate the Bluetooth function in your

ATN Smart HD Scope.

4.2 Enter the system setting from the menu.

4.3 Select the Settings Category.

4.4 Select the WiFi and Bluetooth subcate-

gory.

4.5 Select Remote Controller.

4.6 Select Pair. You should see a half circle

move around in the upper right side of the

screen around the Bluetooth Icon.

4.7 Press and hold the Home Button and Top

Arrow Button closest to the Directional Roll-

er for 2 seconds, this will pair the X-TRAC to

your scope.

5. X-TRAC BUTTON

ORIENTATION

You have two options on how to have the

X-TRAC buttons oriented when mounted on

a rifle.

1) Having the Directional Roller in Front.

2) Having the Directional Roller in the Back.

5.1 Enter the system setting from the menu.

5.2 Select the Settings Category.

5.3 S

elect the WiFi and Bluetooth subcategory.

5.4 Select Remote Controller Orientation.

5.5 Select Wheel Front or Wheel Back.