Menu Mode
Enter into menu mode by pressing both Button “1” and “3” more than 3 seconds
under working status.
FIG. 1-7
1. Button Definition under Menu Setting Mode
Button “1”: Menu page up
Button “2”: Menu exit
Button “3”: Menu page down
Parameter plus
Parameter minus
3. Defining Work Function
2
REAL SET
h
0
Under menu HTO mode, it can adjust time of defining work by pressing “▲”or“▼”
key (FIG. 1-9, the time of defining work is 20 seconds, “0” means turn off defining work
function, the minimum setting time for defining work is 10 seconds, maximum setting
time is 900 seconds. ); it can turn up or down menu by pressing Button “1” or “3”,
then press Button “2” to exit and save your setting.
0
SET
L
FIG. 1-8 FIG. 1-9
Saving and Retrieving Shortcut Temperature(User define)
1. Retrieving shortcut temperature: It can rapidly retrieving preset temperature and blowing
restored in Button “1”/“2”/“3” by pressing Button “1”/“2”/“3”.(FIG. 1-6)
when working
2. Saving shortcut temperature: It can save the user-define temperature and blowing in
Button “1”/ “2”/ “3” by pressing Button “1”/ “2”/ “3” more than 3 seconds.
FIG. 1-6
6
2. Temperature Locking Function
Under Menu Loc, it can turn on or turn off temperature locking function by pressing
“▲”or“▼”key(FIG. 1-8, ON means turn on temperature lock function, OFF means
turn off temperature locking function); it can turn up or down menu by pressing Button
“1” or “3”, then press Button “2” to exit and save your setting.
0
