ATTO Technology iPBridge 2500D User manual

IP Storage
155 CrossPoint Parkway • Amherst, NY 14068 • 716 • 691 • 1999
attotech.com
ATTO iPBridge™ 2500R/D
• Triple Gigabit Ethernet Ports with
RJ45 connectors
• Dual Ultra3 LVD/SE SCSI busses with
VHDCI 68-pin “P” connectors
• Support for iSCSI protocol standards
• Configuration, Management and
Monitoring via RS232 or independent
Ethernet ports
• Available as a standard compactPCI
embedded board-level product
• Features intelligent Bridging Archi-
tecture™ for optimized performance
TECHNICAL
HIGHLIGHTS
The iPBridge™ 2500R/D offers End
Users, OEMs and Integrators IP network
connectivity for existing direct-connect
SCSI devices. Uniquely designed to
support the high throughput needs for
applications that require streaming
data transfers (data backup), the
ATTO iPBridge 2500R/D optimizes
performance by utilizing ATTO’s proven
intelligent Bridging Architecture™.
The ATTO iPBridge 2500R/D supports
the iSCSI protocol, maximizing appli-
cation, system and network configura-
tion flexibility and support, making
it ideal for both iSCSI SAN environ-
ments.
Gigabit Ethernet-to-SCSI Bridge featuring management
and connectivity to iSCSI applications

IP Storage
Gigabit Ethernet and SCSI
GbE Interface:
• Triple independent 100/1000 GbE RJ45
Ethernet ports
• Supports IP v.4
• Compliance with IEEE 802.3 GbE
• Compliance with IEEE 802.3 Flow control
• SNMP MIB 2.2 support
• Supports Microsoft iSCSI Initiator
SCSI Interface:
• Dual independent 160 MB/sec. Ultra3
LVD/SE SCSI bus ports
• SCSI block level data encapsulation in
iSCSI transport
• Controlled backup, recovery and data
transfer for network storage
• Backward compatible with all single-ended
SCSI devices
• Upgradeable large MB RAM Memory for
advanced data buffering and performance
Management
Operating Environment:
• Operating system independent
• Supports all SCSI devices including hard
disk drives, tape drives, RAID controllers,
DVD, MO & CD libraries
Local and Network Management:
• Integrated web server for remote
configuration, management and
diagnostic capabilities
• Local diagnostics supported through CLI,
SNMP, Telnet, FTP and SCSI Enclosure
Services (SES)
• Command line and menu-based ASCII text
management access via Ethernet
• Support for RS-232 access via RJ-11 interface
• MultiTarget Mode allows each SCSI device
to have its own iSCSI Target name
• Multiple levels of password protection
LEDs:
• Ethernet link and activity
• SCSI activity
• Fault
Environmental and Physical Characteristics
Configurations:
• Single (embedded) PCB
• Desktop enclosure with rack mount kit
Dimensions:
• Embedded Board:
6.193” W x 6.375” L
• Rack/Desk Enclosure:
1.7” (1U) H x 17”W x 8.94” L
Operating Environment:
• Operating: 5-40º Celsius
• Temperature: user configurable
integrated thermal sensor data
for automatic shutdown
Default 70º Celsius
• Air Flow: Recommended 11 CFM
Ambient Air not to exceed 40º Celsius
• Humidity: 10-90% non-condensing
ATTO iPBridge™ 2500R/D
Power:
• Embedded:
0.8A@ 12V, 0.3A@ 5V, 5.0A@ 3.3V
18 Watts
Weight:
• 8 lbs (Rack/Desk model)
©2005 ATTO Technology, Inc. Specifications subject to change without notice. Rev 11/05
Power Switch
Figure 1 - Rear Panel View
Serial Port SCSI Port 1
Air Vent GigE Port GigE Port GigE Port SCSI Port 2