ATZ VC-SDIx2-HDMI User manual

Model : ATZ L K1708WUSB- DVI
Description : 17.3" 8 portD VI FHD LCD KVM switch, with U SB 2.0 HUB,
c/w 8 x 2 meter DVI/Audio /USB cable/8 x HDMI to DVI co nverter
Model : ATZ VC-SDIx2-HDMI
Description : SD/HD/3G SDI to HDMI Converter with SDI loop-out
pg. 1

Model : ATZ L K1708WUSB- DVI
Description : 17.3" 8 portD VI FHD LCD KVM switch, with U SB 2.0 HUB,
c/w 8 x 2 meter DVI/Audio /USB cable/8 x HDMI to DVI co nverter
Model : ATZ VC-SDIx2-HDMI
Description : SD/HD/3G SDI to HDMI Converter with SDI loop-out
pg. 2
1.0 Introduction:
The SDI to HDMI converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on HDMI/SDI
displays while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any
loss. For professionals this means that it is now easier to distribute and extend your 3G SDI signal
while giving you the ability to display your work on HDMI displays thanks to the built in HDMI
converter. Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy both SDI
and HDMI displays at the same time.
2.0 Features:
1) Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s.
2) Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,SMPTE 259M-C.
3) Equalized and re-clocked loop output• Integrated audio de-embedder for a maximum of 8
channel, 48 kHz audio.
4) Auto video mode detection (3G/SD/HD)
5) Conversion from SMPTE 425M level B to Level A 1080p 50/59.94/60 4:2:2 10-bit.
6) Connect with other units to extend your signal over long distances.
7) Simultaneous display with SDI and HDMI signals
8) Supports signal transmission distances of up to 300M for SDI signals, 200M for HD signals and
100M for 3G signals
3.0 Packaging accessories:
Before attempting to use this unit, please check the packaging and make sure the following items
are contained in the shipping carton:
1) SDI TO HDMI CONVERTER------------------------------1Pcs
2) 5V DC Power Adaptor---------------------------------------1Pcs
3) User Manual---------------------------------------------------1Pcs
4.0 Specifications:
Input Port -----------------------------1 x BNC (SDI/HD-SDI/3G-SDI)
Output Ports--------------------------1 x HDMI, 1 x BNC (SDI/HD-SDI/3G-SDI)
SDI Transmission Rates-----------2.970 Gbit/s and 2.970/1.001 Gbit/s
In/Output Resolution----------------480i, 576i, 720p@50/59.94,60 ,1080i@50/59.94/60
[email protected]/24/25/29.97/30/50/59.94/60
Power Supply-------------------------DC 5V ESD Protection Human body model ±8kV (air-gap
discharge) ±4kV (contact discharge)
Dimension-----------------------------100mm x 65mm x 25mm
Weight----------------------------------200g
Operating Temperature------------0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature--------------20°C ~ 60°C / -4°F ~ 140°F
elative Humidity---------------------20 ~ 90% RH (Non-condensing)
Power Consumption (Max)-------5W

Model : ATZ L K1708WUSB- DVI
Description : 17.3" 8 port D VI FHD LCD KVM sw itch, w ith USB 2.0 HUB ,
c/w 8 x 2 meter DVI/Audio /USB cable/8 x HDMI to DVI co nverter
Model : ATZ VC-SDIx2-HDMI
Description : SD/HD/3G SDI to HDMI Converter with SDI loop-out
pg. 3
5.0 Panel introduction:
Please study the panel drawings below and become familiar with the signal input(s), output(s) and
power requirements.
SDI LOOP-------------------SDI Output interface
PW-----------------Power Input Status Indication
Status-----------------SDI Input Status Indication
DC 5V------------------------Power Input interface
HDMI OUTPUT-----------HDMI Output interface
6.0 Connection and operation:
Connect the Coaxial Cable between SDI signal source and SDI INPUT of converter.
Connect the Coaxial Cable between converter and SDI display.
Connect the HDMI Cable between converter and HDMI display.
Connect the power adapter between converter and outlet.
Open the power supply of HDMI signal source and the display. Choose corresponding input
ports, then it works.
WARNING
1) Do not expose this apparatus to rain, moisture, dripping or splashing and
That no objects filled with liquids, such as vases, shall be placed on the
apparatus.
2) Do not install or place this unit a bookcase, built-in cabinet or in another
confined space ensure the unit is well ventilated.
3) To prevent risk of electric shock or fire hazard due to overheating, do not
Obstruct the unit's ventilation openings with newspapers, tablecloths,
curtains, and similar items.
4) Do not install near any heat sources such as radiators, heat registers,
Stoves or other apparatus(including amplifiers)that product heat.
5) Do not place sources of naked flames, such as lighted candles, on the
unit.
6) Clean this apparatus only with dry cloth.
7) Unplug this apparatus during lightning storms or when unused for long
periods of time.
8) Protect the power cord from being walked on or pinched particularly at
plugs.
9) Only use attachments/accessories specified by the manufacturer.
10) Refer all servicing to qualified service personnel.
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean
this unit.