Once installed, the iD mixer
can be opened by going to
Menu bar and clicking the iD
icon.
Once installed, the iD mixer
can be opened by going to the
system tray and right clicking
the iD icon.
Please read this quick guide to help get you started. For more information,
download the full manual & specifications from: audient.com/iD14/downloads 1. Download the iD application for Mac from
audient.com/iD14/downloads
2. Open the downloaded file and drag the iD icon into the
Applications folder.
3. Connect the iD4 to the Mac using the included USB-C cable.
A third party USB-C to A cable can also be used if required.
Requires a connection to a USB 3.0 port or greater.
4. Run the iD application from your Applications folder.
If a firmware update is available you’ll be prompted to install it.
5. A registration screen will appear allowing you to register your
product with Audient ARC to receive firmware updates as well
as exclusive plugins and software.
MacOS
macOS 10.11.6 (El Capitan) or later.
Mac Intel CPU
1GB RAM Minimum
System requirements:
1. Download the iD application for Windows from
audient.com/iD14/downloads
2. Open the installer and follow the instructions shown on
screen. It will ask you to connect the iD14 during the installation
procedure. Once the installer is complete it can sometimes take a
few moments for Windows to finalise the drivers before the unit is
recognised.
3. Launch the iD application from the Application list in the Start
menu. If a firmware update is available you’ll be prompted to
install it.
4. A registration screen will appear allowing you to register your
product with Audient ARC to receive firmware updates as well as
exclusive plugins and software.
Windows
Welcome to your new Audient iD14 Audio Interface
iD Button
Main Output Select
Volume Knob
Headphone
Output Select
Main Meters
Channel 1
(Mic/Line Input)
Channel 2 (Mic/Line Input)
Phantom
Power
