Audio Authority 1714 User manual

User Manual
Model 1714
Headphone Demonstration
Amplifier with Volume Control

2
701-16700
ROTARY CONTROLS
HEADPHONE OUTPUTS
AUDIO
BUS OUTAUDIO INPUT
HEADPHONE DEMONSTRATOR
SYSTEM BUS
Model 1714
POWER
BUS OUT
POWER
INPUT
UP
DOWN
UP
DOWN
VOLUME
TIMEOUT MINIMUM MAXIMUM
VOLUME
DEFAULT
VOLUMEVOLUME
OUTPUT 3
VOLUME
OUTPUT 4
UP
DOWN UP POWER
VOLUME OUTPUT 1
VOLUME OUTPUT 2
DOWN
2/2
POWER
INPUT
POWER
OUTPUT
MINIMUM
VOLUME
DIAL
MAXIMUM
VOLUME
DIAL
DEFAULT
VOLUME
DIAL
DEMO
TIMEOUT
DIAL
MUSIC PLAYER
HEADPHONE
POSITION 1
HEADPHONE
POSITION 2
HEADPHONE
POSITION 3
HEADPHONE
POSITION 4
VOLUME CONTROL BUTTONS
VOLUME
CONTROL
ENCODER
KNOBS
AUDIO BUS OUT
Introduction
The 1714 is designed to provide high delity headphone amplication and
volume control for self service retail demonstration. All outputs are active all the
time, volume is adjusted individually for all outputs.
MODEL 1714
VOLUME CONTROL BUTTONS
•
POWER LED
VOLUME DOWN 4 VOLUME UP 4 VOLUME DOWN 3 VOLUME UP 3
VOLUME UP 2 VOLUME DOWN 2 VOLUME UP 1 VOLUME DOWN 1

3
Package Contents
Before installing this product, please check the packaging and make certain the
following items are contained in the shipping carton:
• 1714 Headphone Demonstrator
• DC Power Adapter
• User Manual
Features
• High quality headphone amplication
• Volume control via buttons or rotary encoders (sold separately)
• Volume limits
• Adjustable volume timeout
Audio Source
Connect a music player to the AUDIO INPUT jack.
Note: Make sure the volume on the player is turned all the way up, and not accessible to customers.
Volume Control (Encoder Knob)
To control volume using a volume knob, connect a four-conductor encoder such as
Audio Authority’s Model 1793 or 1794 to the four-pin encoder port at each position.
Push the knob to mute audio. These controls allow mute by pressing the knob.
Volume Control (Up and Down Buttons)
To control volume using push-buttons, connect four-conductor momentary switches
to each position’s up and down port. Compatible push-buttons are available from
Audio Authority. Mute is not available when using push-buttons.
Note: Please retain the original packing
material in case the unit must be
returned. If you nd any items are
missing, contact Audio Authority
immediately. Have the Model Number
and Invoice available for reference
when you call.
Product Select
push-button
1794 Encoder, 1793 is similar
with brushed aluminum nish.

2048 Mercer Road, Lexington, KY 40511-1071 USA
800-322-8346 • 859-233-4599 • Fax: [phone]
[e-mail] • www.audioauthority.com
752-672 Rev. 20140520
Timeout Interval
All outputs return to default volume after a period of
inactivity (the timeout interval). The timeout interval is
set by the TIMEOUT dial, in increments of 15 seconds.
If the timeout switch is set to 0, the demonstration does
not time out. Each time a customer adjusts volume the
timeout resets. Default volume may be adjusted from
low (0) to high (9) volume level.
Audio Bus Out
The audio BUS OUTPUT feeds the currently selected audio input (MUSIC
PLAYER) to more 1714 modules in the system. Do not connect headphones to
this output. Connect a 3.5mm patch cord from the rst 1714 bus output to the
second 1714 player input, etc.
Power
Connect included 12V power supply to Power Input. Connect jumper to other
1714 units if desired.
Operation
On power up, the POWER light comes on to show normal operation. VOLUME
DOWN/UP buttons (if installed) light up when pressed and released. Press
VOLUME DOWN/UP to control volume. Rotary VOLUME knob increases volume
with clockwise rotation, push in function selects mute/un-mute. Rotating the knob
also un-mutes the audio.
Timeout Interval
115 seconds
230 seconds
345 seconds
460 seconds
5 75 seconds
6 90 seconds
7105 seconds
8120 seconds
9 135 seconds
0 Never