Audio Authority High Definition Cat 5 Matrix AVX-562 User manual

Model AVX-562
High Definition Cat 5 Matrix

AVX-562 FEATURES:
• Six inputs and six Cat 5e/6 remote outputs in one unit
• Any source may be routed to any remote output
• Expandable to up to 36 remote Cat 5 outputs
• Loss-free signal distribution up to 1,000 feet over Cat 5
• High bandwidth component video up to 1080p
• Cat 5 receivers provide YPbPr plus digital & analog audio
• Cat 5 bus delivers power for wallplate/receivers
• Pathway for IR control signals through Cat 5 bus
• IR routing system for discrete source control built in
• IR remote control and rack mount ears included
The Revolutionary Cat 5 Video & Audio Distribution System
HD Matrix Signal Distribution
Custom Options
The AVAtrix Model AVX-562 is an HD matrix that
delivers component video, digital audio and stereo audio
signals for distributed video and home theater systems.
Any of six sources may be routed to multiple remote
wallplates or to the main output at any time. Each of the
AVX-562’s outputs is terminated at a wallplate/receiver
which provides a connection point for component video,
digital audio, and stereo analog audio. Audio Authority’s
innovative balanced line architecture, along with our
Active Gain Equalization (AGE) technology, allows the
signal to be transmitted up to 1,000 feet while preserving
high definition signal clarity and vibrancy.
The Model AVX-562 is easy to install right out of the box with virtually no setup or assembly required for basic installations. The
system is loaded with all the features and options needed for complex installations as well. It ships with its own IR remote control, and
the AVAtrix IR and RS-232 control codes are available for download from Audio Authority as well as several remote control companies.
Each source input can be given a custom name that is displayed on the fluorescent display. A flash memory slot allows easy firmware
upgrades and provides a way for installers to quickly perform setup tasks using a PC for configuration.
Audio and video signals are carried on two
Cat 5 cables to each wallplate/receiver. The
wallplates are powered from the head end
over Cat 5 – no power connection required
at the zone. A return pathway for IR signals is included in the
Cat 5 cable run. This pathway allows the AVAtrix to be remotely
controlled via IR, and it also delivers discrete IR control signals
to the sources.
Cat 5 Wallplate Receivers AVX-562 Rear Detail
DISCRETE IR OUTPUTS
SIX SOURCE INPUTS
SIX CAT 5 OUTPUTS PC FLASH PORT
IR CONTROL INPUT
RS-232 CONTROL
MAIN IR OUTPUT

AVX-562 Contents (1) HD Cat 5 Matrix with IR routing
(1) 1105 IR remote control
(1) Internal bus cable (with two open ports)
(1) 18V DC power adapter
(2) Rack ears
Cat 5 Receiver Options 9878 dual-gang stainless steel wallplate
(Purchased separately) 9879 single-gang Decora®style wallplate
9880 enclosed breakout box receiver
Inputs / Outputs YPbPr, digital audio and stereo analog audio
Control Methods Front panel controls
Front panel IR
IR input on rear panel
RS-232 connection on rear panel
IR receivers installed at remote Cat 5 receivers
AVX-562 SPECIFICATIONS:
Video Signal Type:
Video Formats:
Video Input/Output Impedance:
Video Input Ground Isolation:
Video Gain:
Video Gain Accuracy:
Video 3dB Bandwidth:
Video Input Coupling
Video S/N Ratio:
Max Video Gain/Equalization
Left and right stereo
Multi-channel digital
Optical & coaxial in/out
75 ohms/ 50K ohms
10-50KHz
72dB
0.03%
3.5” x 16.5” x 9.6”
One year, parts and labor
FCC, CE
Analog Audio:
Digital Audio:
Digital Input/Output
Audio Input Impedance
Audio Frequency Response
Audio S/N Ratio
Audio THD & Noise
Size (H x W x D):
Warranty:
Agency Approvals
YPbPr component video
480i/p, 540i/p, 720p, 1080i/p
75 ohms
No
1
2%
100MHz
AC
61dB
1
The Perfect HDTV Distribution Solution
The AVX-562 is your ticket to quicker, simpler, headache-
free installations. Two Cat 5 cables are all you need—they
do the work of six coaxial cable runs plus provide an IR
pathway for source control. Balanced line technology
allows for superior noise rejection and excellent picture
quality. The AVX-562 is perfectly suited for home use,
restaurant television distribution, digital signage, even retail
demonstrations of HDTV.
VIDEO AND AUDIO SIGNAL FLOW
Source and TV Connections
• YPbPr component video
• Optical digital audio (source only)
• Coaxial digital audio
• L/R analog audio
Cat 5 Bus
• YPbPr component video
• Coaxial digital audio
• L/R analog audio
SYSTEM DETAILS:
LOCAL

Any Source,
Any Display,
Any Time.
The 1172 Audio Interface is a breakout adapter that allows the easy
connection of whole-house audio amplifier components. It provides digital
and analog audio to independent audio systems with integrated switching
or systems with dedicated zone amplifiers. Connects via internal system bus
cable and four jack screws.
Interface with an Audio Distribution System
Add Remote Zones
Expand and Extend the AVAtrix
The 1176 HD Cat 5 Matrix Router expands an AVAtrix system to allow six
additional matrix outputs. Add up to five 1176s to the AVX-562 to increase
the total outputs to 36 remote locations. Connects via internal system bus
cable and four jack screws.
2048 Mercer Road, Lexington, KY 40511-1071 USA
Phone: [phone] • Fax: [phone]
Customer Toll-Free USA & Canada: 800-322-8346
www.audioauthority.com
Bus Cable for Adding More than Two Expanders
The AVAtrix has an internal ribbon bus cable that allows for two expanders
(802-567). If you plan to add three to five expanders, the seven-port
802-568 bus cable is required.
Send IR Signals to or from the Head End
The 1109 IR Injector allows IR control signals to be sent from a device
near the AVAtrix out to IR emitters connected to wallplate/receiver jacks.
Connections for up to six wallplate/receivers with each pathway operating
independently to enable a mix of incoming and outgoing IR signals. Requires
no power source.
AVAtrix, Audio Authority and the Double-A Symbol are trademarks or registered trademarks of Audio Authority Corporation. Copyright August, 2008.