AudioCodes Commander MP264DB User manual

COMMANDERGATEWAY
QUICK START GUIDE
> Please read carefully before use.
SAVES BUSINESS

MP26444C630
VT4532920
M2
P03
VT4532920
MP26444C630
VT4532920
M2
P03
VT4532920
Connecting your gateway to your Business NBN/Fibre Broadband
This quick start guide is designed to get you up and running quickly with your new gateway.
Power Adaptor
Phone Cable
2x Network Cable
1. Connect your gateway to the internet by connecting the LAN4/WAN to the NBN Data Port
or the allocated labelled UNI-D on the NBN ONT using the supplied network cable .
2. Connect the second network cable to your computer then to your gateway port labelled LAN1 .
3. Connect your power adaptor to the gateway and your wall outlet. Ensure the gateway is switched on.
4. If you have a Business NBN/Fibre Broadband or Voice Service, delivered over the Commander
Gateway, connect the telephone cable from your existing telephone or telephone system to the
port labelled Phone 1 and / or Phone 2 (refer to your welcome email) .
Configuring Your Gateway
After you have completed steps 1 through 4, your gateway will automatically start talking to our
servers. It will retrieve your login details and other settings during this time, so please leave it
connected and allow up to 10 minutes for your gateway to set up automatically. Your gateway may
reboot during this process.
Once this process has completed, you should have a green light for Status and Broadband (and
Phone if applicable).
Business Fibre Data Port
For NBN connections please refer
to your NBN welcome pack
& Voice Service

Commander Pty Ltd
ABN 85 136 950 082
Level 10, 452 Flinders St
Melbourne VIC 3000
www.commander.com
Setting up your WiFi Network
Your gateway has WiFi capabilities which means you can connect wireless devices such as laptops,
smartphones and tablets to the gateway in your oce, so that you can access the internet through
them wirelessly.
On the back of the gateway you will find your WiFi network name (WiFi SSID) and password (WiFi
Password), you will need these details to connect your devices.
Using the device you would like to connect to your gateway, search for WiFi networks. Once you find
your WiFi network name (or SSID) select that network. You will be prompted to enter a password or
network key. Once you have entered your password you should be connected!
Your connection and WiFi network settings are unique and automatically secure, you can repeat the
above steps on multiple devices that you would like to connect wirelessly.
SAVES BUSINESS