
IFB-1000 Specications
General
Channel Supplied Power Requirements:
+24 VDC nominal (standard Audiocom® line), 50 to 80 mA
Environmental Requirements:
Storage: -20°C to 80°C; 0% to 95% humidity, non-condensing
Operating: 0°C to 50°C; 0% to 95 % humidity, non-condensing
Dimensions: 3.25” (82.6 mm) high, 3.5” (88.9 mm) wide, 1.8” (45.7 mm) deep
Weight: 1.0 pounds (0.45 kg)
Interface Requirements
Earset:
150 to 600 ohm headphones
Balanced Intercom Channel Level & Impedance:
1 Vrms nominal; 300 Ω ±5%
Noise Contribution:
Less than -60 dB on the line.
Headphone Amplier
Voltage Gain:
27 ±3 dB from the line
Maximum Output:
60 mW into 150 Ω
Frequency Response:
200 Hz to 8 kHz +1/-3 dB
Connector Pin Congurations
Headphone Connector:
Type: ¼” Monaural Plug
Sleeve Headset audio low
Tip Headset audio high
Ordering Information
IFB-1000
Belt Pack
Catalog Number: 90007477000
This specications information is preliminary and is subject to change without notication.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: (800) 392-0498
Fax: (800) 323-0498
Form Number: PA20311
Date: February, 2006