Audiovox MCI -3300 User manual

MCI-3300
555 Wireless Blvd., Hauppauge, NY 11788
631-233-3300 ●http://www.audiovox.com
Owner’s Manual
Dual Mode Digital CDMA Telephone
REV.01
MCI-3300.(03 00.8.22 5:04 PM 페이지1

TABLE OF CONTENTS
Adjusting Ringer Volume
Auto Answering
Flip Answer
Chapter Memory Functions
How to Store a Phone Number
•Entering Letters and Numbers
How to Make a Call Using a Stored Phone Number
•One-touch Dialing
•Two-touch Dialing
•List of Last Calls
•Recalling by Memory Location Number
•Recalling by Phone Number
•Recalling by Name
Schedule Management
•Setting the Schedule
•Checking and Deleting Schedule
Alarm Call
•Editing the Alarm Call
Electronic Calculator
Chapter Convenient Functions
Using the Menu
Menu Structure
How to Adjust the Screen
•Current Date and Time Display
•Backlight Function
•LCD Contrast Adjustment
3
3
4
TABLE OF CONTENTS
Chapter Before Using Your Phone
Precautions
Package Contents
Handset Functions
•Handset
•Function Buttons
Screen Display and Functions
Battery Insertion and Detachment
•Battery Insertion Method
•Battery Detachment Method
Charging the Battery
•Time to Complete Battery Charging
•Battery Life ( for new Battery )
Tips on Efficient Battery Use
Chapter Basic Operation
Basic Operation
•How to Turn the Handset On
•How to Turn the Handset Off
•How to Make a Call
•How to Answer a Call
•Recalling Last Number Dialed
•Signal Strength
•Remaining Battery Indicator
How to Adjust Volume
•Using the Volume Button
Ringer/Vibration/Light Selection
Ringer Type Selection
2
1
2
6
7
8
9
9
10
11
12
12
12
13
14
14
15
16
17
17
17
18
19
20
20
20
21
21
22
23
24
25
26
28
29
30
31
31
31
32
33
34
35
36
36
37
38
38
39
40
41
42
44
44
45
46
MCI3300-02/10 00.8.22 5:32 PM 페이지1

TABLE OF CONTENTSTABLE OF CONTENTS
•LED Use Selection
Verifying Call Time
•Verification of All Calls
•Verification of the Last Call
•Verification of Roaming Calls
•Verification of Recent Calls
Alert Function
•Time Alert
•Area Alert
Security Information
•Automatic Lock
•Lock Code Change
•Greeting Change
•Call Restriction
Blocking Incoming Calls
Blocking Outgoing Calls
Blocking Stored Phone Numbers
•Clearing Memory
Clearing Stored Numbers
Clearing Last Calls
Clearing Recent Calls
Clearing Roam Time
•Reset Phone
•Voice Privacy Mode Selection
Features Used While Call is Connected
•Caller Number Sending
•Self Number Check
•Silent Pad Phone Number Storage Function
4
47
48
48
48
48
48
49
49
50
51
51
52
53
54
55
55
56
57
57
58
58
59
60
61
62
62
62
63
•Microphone Muting Feature
•Ear Volume
•Voice Privacy
•Link Dialing
•Inserting a Hyphen
Phone Information
•Self Number Check
•Handset Version Check
System Selection Feature
•Force Call
•Selecting Preferred System
Chapter Supplementary Functions
Short Message Service(SMS)
•Message Reception
•Checking Received Messages
•Checking Missed Messages
Biorhythm Checking
Stopwatch
World Time Display
Etiquette Feature
Appendix Optional Devices
•Hands-Free Kit for Vehicles
•Others
Summary Table of Functions
5
5
63
63
63
64
65
66
66
66
67
67
67
68
69
69
70
71
72
74
75
76
79
79
79
80
MCI3300-02/10 00.8.22 5:32 PM 페이지3

Before Using Your Phone
Please read this chapter before using this product.
󱂧Precautions
󱂨Package Contents
󱂩Handset Functions
󱂪Screen Display and Functions
󱂫Battery Insertion and Detachment
󱂬Charging the Battery
󱂭Tips on Efficient Battery Use
Chapter1
PRECAUTIONS
1
7
Do not use in high-temperature or
high-humidity environments. Do
not expose the handset to rain or
spilled beverages.
Do not modify
or take apart
the handset
Do not touch the
antenna during a
call.
Do not clean your
handset with
chemical solutions
such as solvent or
thinner.
Do not use your
handset near
explosives or
flammable liquids.
Keep the handset in a safe
place when not in use.
Avoid striking, shaking, or
shocking.
Fully charge battery
before use.
MCI3300-02/10 00.8.22 5:32 PM 페이지5

Handset
HANDSET FUNCTIONS
1
9
PACKAGE CONTENTS
Thank you for your purchasing Audiovox CDMA cellular phone. Please
check the product contents by comparing them with the following pictures.
8
◀Handset
◀Desktop Charger
◀User’s Manual
◀Belt Clip
● Ear-microphone Jack
● Folder Cover
● Volume Button
Used to adjust
earpiece volume,
key tone volume
and handsfree
volume.
Key lock is enabled
when the folder cover
is closed (however,
key lock is disabled
when receiving a call).
◀Standard battery
▲Portable Loop ◀Ear-microphone
(Option)
Check with your local distributor which battery type is supplied as standard. If there
are any product defects, please report them to the place of purchase immediately.
●Antenna
●Earpiece
●END/
Used to power on/off.
End Calls.
●Microphone
●Mute
Used to silence Audible
Tones In Standby And
Mute Conversation.
●LCD Display
●Feature
Buttons
MCI3300-02/10 00.8.22 5:32 PM 페이지7

SCREEN DISPLAY AND FUNCTIONS
1
11
Function Buttons
HANDSET FUNCTIONS
10
This button is used to access the menu.
This button is used to make or receive a call
Press this button to terminate a call or exit the
current menu. Press and hold to turn the phone on
or off.
This button is used to clear digits and /or texts from
the display or exit the current menu.
This button is used to access a sub menu or store
set parameter; store names and numbers; view
stored or just called numbers; and the Scheduler and
Calculator.
These scroll buttons are used to select screen
contents.
This button is used to access text and voice
messages.
Used to silence Audible Tones In Standby And
Mute Conversation.
Signal Strength
The strength of the current signal is displayed by the
number of bars (0-5).
Roaming
This icon indicates the user is outside the normal service
area.
Service / No Service
When within service area, is displayed.
If not, is displayed.
(In Busy) Appears when the line is busy
Short Message Service
Blinks when text or voice messages have been received
and stored.
Digital Mode
Displayed when the phone is in digital mode.
Balance of Battery Power
The balance of battery power available is displayed by the
number of bars (0-4).
Mute
Used to silence Audible Tones In Standby And Mute
Conversation.
MCI3300-02/10 00.8.22 5:32 PM 페이지9

CHARGING THE BATTERY
1
13
Battery Insertion Method
BATTERY INSERTION AND DETACHMENT
1
12
As shown in picture ①, insert the battery to fit into the
groove at the bottom of the handset.
Then press in the direction of ② until it snaps.
Battery Detachment Method
2
Push the handset separation tab ① with one hand and
pull in the direction of ② to separate.
•The battery isnot chargedwhen you purchase the product. Use thebattery
only after itis fully charged.
•Chargeyour battery when the batterylow-voltagealarm sounds.
1
Power Connection
Connect the charger to a standard
120V AC outlet.
LED’s will blink orange when the
power is connected.
•Red indicatescharging.
•Green indicatescharging iscomplete.
2
Charging the Battery Only
To charge the battery only, insert
the battery pack into the charger.
LED will indicate charging status.
3
Charging the Battery with the
Handset
To charge the battery with the
handset, insert the handset into the
charger.
•The battery must be correctly placed in the battery compartment. If the battery is
incorrectly inserted, the handset will not turn on or the battery may slip out.
•Battery is not charged when you purchase the product.
•Fully charge the battery before use.
•Charging the battery with the handset on is less efficient than charging it with the
handset off.
①
①
②
②
MCI3300-02/10 00.8.22 5:32 PM 페이지11

Battery Life (for New Battery)
TIPS ON EFFECTIVE BATTERY USE
1
15
Time to Complete Battery Charging
CHARGING THE BATTERY
14
4
Charging Completion
Charging is completed when the green-colored light stays on.
•The handset may remain in the chargerafter the greenlight is
turned on.
•Charge the battery whenthe battery low-voltage alarm sounds
from the handset and the“Very Low Battery!”messageappearson
the screen.
•Whenthe“Low Battery Warning! Phone is Turning OFF!”
message appears onthe screen the handsetwill turn off
automatically. Change or charge thebattery immediately.
•The operating times are approximate valuesandmayvarydepending
onnetwork configuration andhandsetusage.
Battery Type Standard Battery
Charging Time About 200 mins.
Continuous Call 120-150min.
Continuous Standby 30-60 hours
Standard Battery
Status Type
Use only batteries and chargers approved by the phone manufacturer.
When a charger is not in use, disconnect it from the power source. Do not
leave the battery connected to a charger for longer than a week;
overcharging may shorten its life.
If left unused, a fully charged battery may completely drain (discharge) in 1
- 4 weeks.
Never use any charger or battery that is damaged or worn out.
Use the battery only for its intended purpose.
Do not short circuit the battery. Accidental short circuiting can occur when
a metallic object (e.g. coin, clip or pen) causes direct connection of the two
terminals of the battery (metal strips on the back of the battery), for
example, when you carry a spare battery in your pocket or purse. Short
circuiting the terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in
summer or winter conditions, reduces the capacity and lifetime of the
battery. Always try to keep the battery between 41ºF and 95ºF (5ºC and
35ºC). A phone with a hot or cold battery may temporarily not work (or
charge) even if the battery is fully charged.
Temperature extremes affect the ability of your battery to charge; allow it to
cool down or warm up first.
When the battery is not in use, store it uncharged in a cool, dark and dry
place.
The battery is a sealed unit with no serviceable parts. Do not attempt to
open the case.
It is recommended that you allow your battery to fully discharge before you
recharge it.
The battery can be charged and discharged hundreds of times but will
eventually wear out. When the operating time is shorter than normal, it is
time to buy a new battery.
Do not dispose of a battery in a fire!
Dispose of used batteries in accordance with local regulations.
Recycle!
MCI3300-02/10 00.8.22 5:32 PM 페이지13

BASIC OPERATION
1
2
17
Basic Operation
This chapter describes the basic operation of the handset.
󱂧Basic Operation
󱂨How to Adjust Volume
󱂩Ringer/Vibration/Light selection
󱂪Ringer Type Selection
󱂫Adjusting Ringer Volume
󱂬Auto Answering
󱂭Flip Answer
Chapter2
•If the phone is in Auto Lock mode the“Lockcode?”message will appear on the screen.
You must enter the 4-digit lock code to use the phone. You can make emergency calls
in Auto Lock mode. Initial lock code will be“0000”(refer to p.51).
•If an error message appears on the screen, contact your local dealer.
How to Turn the Handset Off
1
Hold down󰿵󰿶until the phone
powers off.
•If the phone does not power on or acts abnormally, remove
and reinstall the battery.
Use only the [ ] button to turn off the phone.
Turning off the phone by removing the battery
could result in memory damage.
MCI WORLDCOM
XXX-XXX-XXXX
MCI WORLDCOM
Jan 20, Wed
4:03pm
MCI WORLDCOM
Jan 20, Wed
4:03pm
============
Power Off
1
Hold down󰿵󰿶until for 2 seconds.
How to Turn the Handset On
MCI3300-02/10 00.8.22 5:32 PM 페이지15

How to Answer a Call
BASIC OPERATION
2
19
BASIC OPERATION
1
Enter the phone number.
18
How to Make a Call
213-
555-5262
Area
Code
Phone
Number
󱈢 󱈢
To delete a wrong number, press [CLR] to
back up. Todelete allentereddigits, press
[END]orholddown [CLR].
2
Press󰿵 󰿶.
•Ifthe line is busy, terminatethe call, wait
fora moment, then try again.
•The“CallFailed”message will appear on
thescreenif the callcannot beconnected.
Calling...
213-555-5262
MCI WORLDCOM
Jan 20, Wed
4:03pm
3
Start the conversation after the call
is connected.
4
To end the call, close the phone or
press󰿵 󰿶. If you are using the
ear-microphone, press the ear-
microphone button shortly.
•To dial the number you have just called, press [ ] .
If you are using the ear-microphone, press the ear-microphone button for more than
2 second.
•If is displayed, you are in an out-of-service area and cannot make a call.
1
Phone rings and the green and red
LED on the folder cover flash. Incoming
Call
•To change receiver type
(Ringer/Vibration/Ringer + Vibration/Lamp),
please refer top 22. Initialsetting is“Ringer”.
2
Open the folder or if the folder is
already open, press any key. except
[ ]key. If you are using ear-
microphone, press the ear-microphone
button for more than 2 seconds.
If you press button once in short, the
bell sound will stop, twice in short, the
function will be some on End
00:00:01
3
Start the conversation.
•Closing the folder while using the ear-microphone
does NOT end the call.
4
To end the call, close the folder or
press󰿵󰿶.
•If Auto Answering Feature is enabled, the call will be answered after the preset number
of rings. (refer to p 25)
00:00:01
213-
555-5262
MCI3300-02/10 00.8.22 5:32 PM 페이지17

Using the Volume Button
HOW TO ADJUST VOLUME
2
21
1
Press the volume buttons to adjust
the volume.
•Conversation: Adjusts ear-piece volume
•Standby :Adjusts key-tone volume
•Conversationwhile usinghands-free :
Adjusts hands-freevolume
BASIC OPERATION
20
1
Press󰿵󰿶and the phone number
you just dialed or the number most
recently saved will dial automatically.
If you are using ear-microphone,
press the ear-microphone button for
more than 2 second.
This feature is used to dial the number just called.
Recalling Last Number Dialed
2
Start the conversation after the call
is connected.
•Closing the folder while using the ear -
microphone does NOT end the call.
1
The strength of the signal is
displayed by the number of bars (0~5).
Signal Strength
3
Press󰿵󰿶or close the folder to
end the call. If you are using ear-
microphone, press the ear-microphone
button once again shortly.
2
After adjusting the volume, press
to save settings.
•Thevolume setting is automatically saved
in2 secondsafter the volume is adjusted.
1
The bars inside the battery icon indicate
the remaining power in the battery. Fully
charged batteries are displayed with four
bars. If the battery power expires and needs
to be charged, no bars are displayed and an
alert beep sounds with a“Very Low Battery!”
message.
Remaining Battery Indicator
[ ] [END]
Ear Volume
[ ] [END]
Handfree Volume
[ ] [END]
Beep Volume
Calling...
213-555-5262
00:00:01
213-555-5262
MCI3300-02/10 00.8.22 5:32 PM 페이지19

RINGER TYPE SELECTION
2
23
RINGER /VIBRATION/LIGHT SELECTION
22
This feature is used to select ringer, vibration or Lamp.
1
Press󰿵 󰿶󱈓②󱈓①.
[ ] [END]
Receive Type
󱈦Ringer
2
Use the scroll buttons to select the
receiver type you want.
Correctorderin phone
•Ringer
•Vibration
•Lamp
•Vib+ Ringer : Vibrates for18 seconds
then thebell sounds
3
󱈢 󱈢 󱈢 󱈢
Press󰿵 󰿶.
3
Press󰿵 󰿶.
This feature is used to select ringer type.
1
Press󰿵 󰿶󱈓②󱈓②.
[ ] [END]
Ringer Select
󱈦Bell 1
2
Use the scroll buttons to select
ringer type.
󱈢 󱈢 󱈢 󱈢
MCI3300-02/10 00.8.22 5:32 PM 페이지21

AUTO ANSWERING
2
25
The call is connected automatically after ringing a set number of times.
1
Press󰿵 󰿶󱈓②󱈓④.
[ ] [END]
Auto Answer
󱈦Off
2
Use the scroll button to select the
setting you want.
•1/2/4/6 Rings : Thenumberofringsbefore
the call is connectedautomatically.
•Off : Auto answeringfeatureis disabled.
3
󱈢 󱈢 󱈢 󱈢
Press󰿵 󰿶.
ADJUSTING RINGER VOLUME
24
This Feature is Used to Adjust Ringer Volume
Tomove between the menu items, use the
scroll buttons [ / ] or the volume
buttons.
󱈢󱈢󱈢 or 󱈢
1
Press󰿵 󰿶󱈓②󱈓③.
[ ] [END]
Ringer Volume
󱈦
2
Adjust the volume by pressing the
volume buttons or the scroll buttons,
then press󰿵 󰿶to store the setting.
•If the receiver type is not set for“Ringer”the auto answering feature is disabled.
•In hands-free mode, this feature works regardless of the receiver type and whether
or not the folder is closed.
MCI3300-02/10 00.8.22 5:33 PM 페이지23

MEMO
2
27
FLIP ANSWER
26
This feature allows you to choose whether you want to receive a call by opening
the folder. This is particularly useful if you want to see the Caller ID before
answering calls.
1
Press󰿵 󰿶󱈓②󱈓⑤.
[ ] [END]
Flip Answer?
󱈦Yes
2
Use the scroll button to select the
desired setting.
•Yes: Allowsyou to receive calls by
opening the folder.
•No : Does notallow you to receivecalls by
opening the folder.To receive a call when
the folderis closed, openthe folderthen
press any key.except [ ]key.
3
󱈢 󱈢 󱈢 󱈢
Press󰿵 󰿶.
MCI3300-02/10 00.8.22 5:33 PM 페이지25

HOW TO STORE A PHONE NUMBER
3
29
Up to 100 phone numbers can be stored in the memory and retrieved by using
a variety of ways.
1
Enter the phone number you wish to
store and press󰿵 󰿶.
[ ] [END]
Default : XX
213-555-5262
[ ] [END]
Overwrite?
󱈦Yes
[ ] [END]
Location : XX
Name?
-
2
•Thefirst available location is automatically
displayed.
•Tostore a numberata different location,
use thenumeric keypad toenter the 2-digit
location numberdesired.
•Locations 90 to 99 are storedwiththe
hidden feature.
•Ifthe desiredlocation already hasa phone
number stored, the“Overwrite?“message
will appear on the screen.
- Tooverwrite, press [ ] .
- To store the number at adifferent
location, press [ ].
3
󱈢 󱈢 or
To store the number in the first available
location displayed, press󰿵 󰿶.
Use the numeric keypad to enter the
name for that location. (refer to p30)
4
Press󰿵󰿶after entering all the
letters.
Memory Functions
󱂧How to Store a Phone Number
󱂨How to Make a Call Using a Stored Phone Number
󱂩Schedule Management
󱂪Alarm Call
󱂫Electronic Calculator
Chapter3
Phone
Number Location
Number
(2-digit)
󱈢
Location
Name
󱈢
MCI3300-02/10 00.8.22 5:33 PM 페이지27

HOW TO MAKE A CALL USING A STORED PHONE NUMBER
3
31
This feature allows you to make a call with phone numbers stored in the
memory location 0 to 9 without having to press the [SEND] key.
1
Hold down the location number for
more than 1 second. Dialing to
memory X
HOW TO STORE A PHONE NUMBER
30
󱂧Press the numeric keypad to select the letter.
󱂨To enter the next letter, press󰿵 󰿶.
Entering Letters and Numbers One-Touch Dialing
Keypad
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
Once
1
A
D
G
J
M
P
T
W
Twice
B
E
H
K
N
Q
U
X
3 times
C
F
I
L
O
R
V
Y
4 times
2
3
4
5
6
S
8
Z
5 times
7
9
•To enter the number“0”,press [ ].
•To enter special characters, keep pressing[ ].
( ! . ? , - ( ) ‘ “ * # = $ _ + [ ] & @ )
To edit entered letters.
•To delete a letter : Press [ ].
•To delete all letters :Hold down [ ].
•The cursor willautomatically move left in 2 seconds after a letter
has been entered.
•The maximum number of letters is 16.
Two-Touch Dialing
This feature allows you to make a call with phone numbers stored in the
memory location 10 to 99 without having to press the [SEND] key.
1
Press the first digit, then hold down
the second digit for the location.
Dialing to
memory XX
•If thelocationis empty,the“ Empty
Location ”message appears on the screen.
•If the phone numberwas stored withthe
hidden feature, the number is not
displayed on the screenwhile calling.
EUGENE
213-555-5262
EUGENE
213-555-5262
Calling...
213-555-5262
Calling...
213-555-5262
MCI3300-02/10 00.8.22 5:33 PM 페이지29

HOW TO MAKE A CALL USING A STORED PHONE NUMBER
3
33
List of Last Calls
HOW TO MAKE A CALL USING A STORED PHONE NUMBER
32
󱈢󱈢󱈢
•Ten last callscan be seen.
1) Call To : Displays date and timeof the
outgoingcalls.
2) Called By : Displays date and timeof
received calls.
3)Missed :Displays date and time of
missed calls.
※The numberdisplayed at the bottom is
the caller IDin 2)and 3).
1
Press󰿵 󰿶󱈓①󱈓①.
1 : Last Call
2 : Location
3 : Number
4 : Name
Jan 20 4:26pm
[01] Call To
2
Use the scroll buttons to select the
phone number you want.
213-555-5262
•[ ] goes to the next numberand,
[ ]goesto the previousnumber.
3
To delete the stored number, hold
down the CLR button for 1 second.
•“EraseMemory?”messageappears onthe
screen. Use the scroll keysto select
between“Yes/No”, thenpress[ ].
•[ ] goesto the next number and,
[ ] goes to the previous number.
•“Erase Memory?”messageappears on the
screen. Use the scrollkeys toselect
between“Yes/No”, then press [ ].
[ ] [END]
Erase Memory?
󱈦YES
4
To call the number displayed, press󰿵 󰿶.
Recalling by Memory Location Number
󱈢 󱈢 󱈢 󱈢
1
Press󰿵 󰿶󱈓①󱈓②.
3
Use the scroll buttons to select the
phone number you want.
4
To delete the stored number, hold
down the CLR button for 1 second.
[ ] [END]
Erase Memory?
󱈦YES
[ ] [END]
Recall
Location?
--
2
Enter the two-digit memory location.
[ ] [END]
Recall
Location?
01
EUGENE
Location : [01]
5
To call the number displayed, press󰿵 󰿶.
Memory
Location
213-555-5262
•If the phone number stored with the hidden feature was found, only the name
of the location is displayed on the screen and the“Lockcode?”message
appears on the screen.
•To view the phone number, enter the 4-digit lock code.
MCI3300-02/10 00.8.22 5:33 PM 페이지31

HOW TO MAKE A CALL USING A STORED PHONE NUMBER
3
35
HOW TO MAKE A CALL USING A STORED PHONE NUMBER
34
Recalling by Phone Number
󱈢 󱈢 󱈢󱈢 󱈢
1
Press󰿵 󰿶󱈓①󱈓③.
3
Use the scroll buttons to find the
phone number you desire.
•[ ] goesto the next number and,
[ ] goes tothe previous number.
•The first available locationcontaining the
entered numbersis displayed.
4
To delete the stored number, hold
down the CLR button for 1 second.
•“Erase Memory?”messageappears on the
screen.Usethe scroll keysto select
between“Yes / No”, then press [ ].
•[ ] goes to the nextnumber and,
[ ] goes to theprevious number.
•Thefirst available location containing the
enteredletters is displayed.
•“Erase Memory?”messageappears onthe
screen. Use the scroll keys to select
between“Yes / No”,then press[ ].
[ ] [END]
Erase Memory?
󱈦YES
[ ] [END]
Recall
Number?
-
2
Enter the phone number (or part of
the number) you wish to find.
Press󰿵 󰿶.
[ ] [END]
Recall
Number?
5262-
EUGENE
Location : [01]
5
To call the number displayed, press󰿵 󰿶.
Phone
Number
213-555-5262
Recalling by Name
󱈢 󱈢 󱈢󱈢 󱈢
1
Press󰿵 󰿶󱈓①󱈓④.
3
Use the scroll buttons to find the
phone number you desire.
4
To delete the stored number, hold
down the CLR button for 1 second.
[ ] [END]
Erase Memory?
󱈦YES
[ ] [END]
Recall
Name?
-
2
Enter the name (or initial part of the
name) you wish to find.
Press󰿵 󰿶.
[ ] [END]
Recall
Name?
EUG-
EUGENE
Location : [01]
5
To call the number displayed, press󰿵 󰿶.
Name
213-555-5262
MCI3300-02/10 00.8.22 5:33 PM 페이지33

SCHEDULE MANAGEMENT
3
37
Checking and Deleting Schedule
󱈢󱈢󱈢
•Thefirst available location witha schedule
is displayedonthe screen.
1
Press󰿵 󰿶󱈓②󱈓①.
2
Use the scroll buttons to check the
schedules.
•[ ] goes to the nextnumber and,
[ ] goes tothe previous number.
3
To delete a schedule, move to the
location that you wish to delete, then
hold down the CLR button for 1 second
•“Erase Alarm?”messageappearson the
screen. Use the scroll keys to select
between“Yes / No”, then press [ ].
[ ] [END]
Erase Alarm?
󱈦YES
SCHEDULE MANAGEMENT
36
Up to 10 schedules can be set.
Setting the Schedule
1
Press󰿵 󰿶󱈓②󱈓②. 1999.6
Su Mo tu We Th Fr
6 7 8 9 10 1112
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
•Thecalendar is displayed. Moveto the date
you desire then, press [ ].
•The date selected is displayed inverted .
- Moving the cursor
- Up/Down :[ ]/ [ ]
-Left/Right : [ ] /[ ]
- Volume buttons : moves betweenthe months
•Thecalendarcanbeseen from1997to 2010.
•The firstavailableempty locationis displayed.
2
Use the scroll buttons to select the
location, then press󰿵󰿶or enter
the 2-digit location number.
[ ] [END]
Alarm Msg : XX
LUNCHEON
XX/XX
XX:XX
Alarm Msg XX
•Off : Disables alarm alert.
•Once : The melody plays for one minute,
then the alert feature is disabled.
•Daily : The melody plays for one minute
every day at the time set.
•If Etiquette feature is enabled, unit will
vibrate.
3
Use the scroll button to select the
desired setting, then press󰿵 󰿶.
[ ] [END]
Alarm Set
󱈦Off
5
Enter the desired message, then
press󰿵 󰿶.
[ ] [END]
Alarm Msg : XX
Message? ---
•Enter the desired date in the
order,hr:min.
Once Daily
•Enterthe desired time in
the orderhr:min.
4
Enter the desired time, then press󰿵 󰿶.
- Set Time -
11/01/1999
00:00
- Set Time -
00:00
1 2 34 5
MCI3300-02/10 00.8.22 5:33 PM 페이지35

Calculator
ELECTRONIC CALCULATOR
3
39
1
Press󰿵 󰿶󱈓④. -CALCULATOR-
0.
2
Using the calculator.
󱈢
•To call the number displayed on alarm alert, press [ ].
ALARM CALL
38
Editing the Alarm Call
󱈢 󱈢 󱈢
1
Press󰿵 󰿶󱈓③.
•Off : Disables the Alarm Call
•Once, Daily : The melody plays for one
minute. Thephone number and “-AlarmCall-”
message are displayed, then the Alarm Call is
disabled.
•Ifthe Etiquette feature is enabled, unit will
vibrate
•Definitions
+ : [ ], —: [ ], X : [ ],
/ :[ ], = : [ ], .: [ ],
•Up to 7 integer digits and up to 2 decimals
can be displayed. Ifthe calculated result has
more than 7 digits, the result is displayedin
7 digit logarithm.
•There is no (-) sign. To express a negative
number,use‘0-value’.
•To see the helpscreen, press thevolume
key, evenif you areinthemiddleofa
calculation.
•Example
To calculate 128 X32 =
1. Enter 128
2. Press [ ]
3. Enter 32
4. Press [ ]
[ ] [END]
Alarm Call Set
󱈦Off
Enter Number
2
Use the scroll buttons to select the
desired setting, then press󰿵 󰿶.
4
Enter the phone number, then press
󰿵 󰿶.
•Enter the desired date and time
inthe order, mm/dd/yearand
hr:min.
Once Daily
•Enterthe desired time in the
order,hr:min.
3
Enter the desired time, then press󰿵 󰿶.
- Set Time -
11/01/1999
00:00
- Set Time -
00:00
Equal to:[ ]
Dot:[SEND]
+:[ ]
- :[MENU]
󱄾 :[ 󱄾]
/ : [#]
MCI3300-02/10 00.8.22 5:33 PM 페이지37