Audiovox DPF908 - Digital Photo Frame User manual

OWNER’S MANUAL
DPF908
Digital Photo Frame

2
A. Introduction
ThankyouforselectingtheDPF908 DigitalPhotoFrame. Themain
featuresincludea9"Screen(16:9AspectRatio)LiquidCrystalDis-
play (LCD)monitor.Theunitappliesthe latest stateof the art elec-
tronics and is designed for use with SD/MMC/MS/CF/xD memory
cardsandUSB memorydevices.The unit isconstructed toprovide
yearsofreliable,trouble-freeservice.Pleasereadtheentireinstruc-
tionmanual suppliedwith thisproductprior tooperation. Thedocu-
mentationwillassistyouinobtaining thebestequipmentperformance.
Allmanualsshouldbe storedforlater use.
B. Cautions and Warnings
1. Placement
Topreventfireor electricshock,do notexposethe DPFtorain or
moisture. To prevent it from falling do not place the DPF on an
unstablecart, stand,tripod, bracket ortable. Keep theunit away
from strong magnets, heat sources, direct sunlight, and exces-
sivedust.
2. Installation
Ensurethatthe DPFis usedin accordancewith theinstructions
andillustrationsprovidedinthismanual.
3. Objects and Liquid
Donotpushobjectsofanykindintotheunitthroughopenings;do
notspillorsprayliquidofanykindonorintheDPF(thismayresult
in a fire or electric shock). Do not place anything heavy on the
DPF.Toensureproperventilationandproperoperation,nevercover
or block the slots and openings with a cloth or other
material.
4. Disassembly
Do not attempt to disassemble the DPF. There is a risk of electric
shock. Contact qualified service personnel if your system is in
need of repair.
5. Cleaning Unit
When cleaning, make sure the DPF is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the DPF
only.

3
C. Contents
1. 1 x 9” Digital Picture Frame w/Battery (CR2025)
2. 1 x AC to DCAdaptor
3. 1 x Remote Control w/Battery (CR2025)
4. 3 x Interchangeable Frame (Black/White/Wood Grain)
5. 1 x Instruction Manual
D. Positioning Your Frame
Pull out the stand to place the frame. Rotate the stand to position the
frame vertically or horizontally. Adjust the stand’s length to obtain the
desired vertical or horizontal viewing angle.

4
E. Unit View
Left and Right Side
SD/MMC/MSSlot
InserttheSD/MMC/MS card
CFSlot
Insert the CF card
USBSlot
Insert a USB memory device
Power On/Off Switch
DC 9V
Plug theAC adaptor
Front Side
Note: The USB slot can not be connected to a PC for transferring
pictures from the PC to the DPF.
IRSensor

5
Top Side
1) Brightness: Press to adjust the Brightness.
2) Play/Pause/Mode: Press to PLAY/PAUSE or select an option.
3) Menu: Press to access the main menu.
4) Up/Copy/Delete: Press to navigate, copy or delete a photo.
5) Down/Rotate: Press to navigate or rotate a photo.
6) Prev. : Press to navigate or view the previous photo.
7) Next: Press to navigate or view the next photo.
Back Side
Eyeholesfor
wallmounting
CR2025backup
battery
1234567

6
F. Remote Control
MENU
Digital Photo Frame
CAL/TIME
SETUP
SLIDESHOW
MENU
ZOOM
LEFT(PREV)
RIGHT(NEXT)
UP
PLAY/PAUSE/
MODE
DOWN/ROTATE
COPY/DEL
Press to select the Calendar or Clock.
Press to enter the Setup menu.
Press to enter Slide Show Mode.
Press MENU to enter the Main menu or Card Selec-
tion menu.
Press ZOOM to enlarge the Display when viewing
photo.
Press to navigate the on-screen menus or to view the
previous photos.
Press to navigate the on-screen menus or to view the
nextphoto.
PresstonavigateUpwhentheDPFisinpausethumb-
nail mode.
Press to PLAY/PAUSE or select another option.
Press to navigate Down when the DPF is in pause
thumbnail mode or rotate the photo.
Press to Copy photos from the card to the frame or
delete photos from the frame’s internal memory

7
G. Viewing Photos
1.Attach theAC / DC adapter to the DC power jack and
plug the adapter into anAC outlet.
2. Place the unit’s Power switch to the ON position and wait for
thetodisplay the Main Menu.
3. Insert the desired Media into the unit’s SD/MMC/MS USB or
CF slots provided.
4. Using the LEFT / RIGHT arrow keys position the high-
light over the PHOTO icon and press theMENUbutton.
5. Select the desired media by using the unit’s LEFT / RIGHT
arrow keys to position the highlight. Once the desired media is
highlighted press the PAUSE / PLAY / MODE button to confirm
your selection.
Note: Only the media installed in the unit will be allowed to be se-
lected.
6. With the Main Menu displayed use the unit’s LEFT / RIGHT
arrow keys to position the highlight over the PHOTO icon
and press the PAUSE / PLAY / MODE key. The unit will
enter SLIDE SHOW mode and will sequentially display the
photos saved on the selected media.

8
7. Pressing the PAUSE / PLAY / MODE key while the unit is in
the SLIDE SHOW mode will results in the unit entering
the PAUSE mode. Once the unit is in the PAUSE mode the
operator can use the LEFT / RIGHT arrow keys to display
the PREVIOUS / NEXT photo.
8. Selecting PAUSE / PLAY / MODE again will place the DPF in
the Thumbnail mode. In this mode the unit displays rows of
thumbnail pictures. Once in this mode the operator can use
the UP / DOWN / LEFT ARROW / RIGHT ARROW keys to
navigate through the pictures. When the desired picture is
highlighted pressing the PLAY / PAUSE / MODE key again
will result in the DPF starting the SLIDE SHOW from the
highlighted picture.
H. Copying and Deleting Photos
Copying Photos to Internal Memory
Please refer to step “G” first. If you want to copy the photo, place
the DPF in PAUSE mode when the desired picture is displayed.
Then press the UP/COPY/DELETE button. A pop-up screen ap-
pears indicating “Copy? Yes/No” use the Left or Right button to
highlight the Yes icon, then press PLAY/PAUSE/MODE button to
confirm. “Wait!Capture Photo” appears as the photo is copied into
the internal memory. The DPF can store up to approximately 40
photos.
Note: You can rotate photos clockwise by pressing the ROTATE
button on the remote control or the Down button on the frame in the
Pause mode. Rotated photos are copied in the rotated position.

9
Deleting Photos from your frame’s internal memory
Press Menu button to bring up the DPF’s main menu. Press the
MENU button again to bring up the Card Selection screen. Using the
Left or Right button select the Memory icon. Press PLAY/PAUSE/
MODE button to select the DPF’S internal memory. Press PLAY/
PAUSE/MODE button two times to enter the Slide show mode. To
delete a photo, select the photo in Slide show mode or Browse
mode, then press the UP/COPY/DELETE button. When the Delete
pop-up screen appears, use the Left or Right button to highlight the
Yes icon, then press PLAY/PAUSE/MODE button. The photo se-
lected is deleted.
Note:
DELETE only deletes photos that reside in the DPF internal
memory.

10
I. Setting
1) With the Main Menu icons displayed, use the RIGHT or LEFT
arrow button to highlight the SETTING icon. Then press PLAY/
PAUSE/MODE to select and enter the setting screen .
2) Use the UP and DOWN buttons to select the menu item you
wish to change. Press PLAY/PAUSE/MODE to enter the
submenu.
3) Select the option you wish by using the UP/DOWN buttons.
Once the desired option is highlighted press the PLAY/PAUSE/
MODE key to select it. When more than one parameter ap-
pears in the submenu, the current parameter in effect is high-
lighted with a check to the left of the parameter.
Brightness
Slide Show Time
TransitionMode
OSD Language
PhotoMode
Default
ExitSetupMenu
Standard
Softness
Enhanced
5S / 10S / 30S / 15M / 1H
Random
No Effect
Cover Up
Cover Down
Cover Left
Cover Right
English
French
Spanish
Normal
Full Screen
The setting items and their definitions are shown below:
Reset