English
7. Settings
1. Press for 3 seconds, will be flashing. Press ,
the is flashing, push up or down to change the ,
push left or right to go to the setting, push up or
down to change the , press to save the setting and
the clock setting.
2. It will remind the user by vibrating when it reaches the time set.
Press R to stop, otherwise it will keep vibrating for 30 seconds.
3. If you don't want to set the alarm, when is flashing, press
twice to enter the clock setting.
1. When entering the clock setting, the time display is flashing,
press , the is flashing, push up or down to
change the , push left or right to go to the setting,
push up or down to change the , press to
the setting and exit.
2. If you don't want to set the time, when time display is flashing,
press twice to exit the clock setting.
7.1 Alarm setting
7.2 Clock setting
hour hour
minute
minute
enter
hour
hour minute
minute
save
7.3 Fixed timing alarm
1. Press for 3 seconds, and will display
on the LCD screen. One of the numbers of is flashing,
press to confirm if you want to choose it, and it will move to
the next number and start flashing, press to confirm or push
to move to the next number.
2. It will exit automatically after all of the five settings are done.
to the right
- 4 -
Note:
corresponds to timings of 3, 5, 10, 20 and 30 minutes
respectively. (e.g. If the user set No. 1, 3, 5 at 11:00, then it will
remind the user at 11:03, 11:10 and 11: 30).
4. Setup
Plug the receiver into the USB port on your PC.The system will
automatically search for the new hardware and complete the
setup.
5. Functions
Laser pointer
Page up/down
Wireless mouse
Powerpoint display and On/Off control
Clock
Self-determined timing alarm
Fixed timing alarm
Chronograph
Key
Screen On / Off
6. Keys
- 3 -
Out of setting mode
Out of setting mode
