August LP107T User manual

User Manual
Wireless Presentation Laser Pointer with Timer
Présentateur pointeur Laser avec changeur de page et minuterie
Schnurloser Presenter mit Laserpointer und Timer
Puntatore Laser senza fili per presentazioni, con timer
Puntero Láser Inalámbrica con Temporizador
August International Ltd
United Kingdom
Telephone: [phone]
Email: [e-mail]
Web: www.augustint.com
LP107T

English
1. Introduction
The wireless presenter is suitable for any presentation or
PowerPoint occasion. With it, you don't need to stand beside your
computer or have an assistant. It is very simple to use, just plug and
play, and no driver is required.
The device enables you to control your presentation wirelessly up
to 10 metres (32 feet) away, thanks to the advanced radio
frequency (RF) technology that works through walls.
It combines the functions of a laser pointer, remote control and
timer. It is tailored as a convenient tool for presentations, teaching,
meetings, speeches and training.
The device supports Windows 98 / ME / 2000 / 2003 / XP / Vista / 7 / 8,
Linux and Mac OS.
2. Operating system
- 1 -
3. Parts & Functions
3.1 Front
Timer
Page Down
Red Laser
Screen On/Off
F5/Esc
Power On/Off
Page Up
Volume +
Volume –
LCD Display
Note:
Press F5/Esc to start or exit a
Powerpoint slideshow.
3.2 Back
4. Battery Installation
The unit is powered by 2 x AAA batteries
- 2 -
Reset
Pull out the USB receiver
Press and slide out
the battery cover
Remove the battery compartment cover
Insert 2 x AAA batteries into the battery holder
Put the battery compartment cover back in position
Wir eless P resen tatio n
Las er Poin ter wit h Timer
®
Ple ase do no t point a t
peo ple and a nimal s.
Mod el:LP 107T
War ning:
Wireless Pre senta tion
Lase r Point er with Timer
®
Please do not point at
people and animals.
Model:LP107T
Warni ng:
Wire less Pres entation
Laser Po inter w ith Timer
®
Please do not point at
people and animals.
Model:LP107T
Warnin g:

English
Note:
the
1) Do not insert batteries into the presenter in the wrong direction.
2) Do not leave bad or exhausted batteries in the presenter.
3) If you do not use the presenter for a long period of time, remove
batteries to avoid possible damage from battery corrosion.
4) If the presenter does not function correctly or if the operating range
becomes reduced, try to replace the batteries with new ones.
5. Setup
Plug the USB receiver into the USB port on your computer. The
system will automatically search for the new hardware and complete
the installation.
6. Timer setting
- 3 -
1) Press Timer on the side of the device, [000] appears and starts
flashing. Press Timer repeatedly to select the length of your
presentation.
Note:
The time increases by 5 minutes from 0 to 60 minutes and by 10
minutes from 60 to 590 minutes.
2) Stop pressing Timer when it reaches the time desired. The digits
will stop flashing to confirm your choice.
3) When there are 5 minutes remaining, it will remind the user by
vibrating every time the time decreases by one minute.
4) If you wish to cancel the timer setting, press and hold Timer until
the LCD displays [000].
Note:
[000] on the LCD screen corresponds to 0 minute. For example,
the timer is set to 120 minutes when it shows [120] on the screen.
- 4 -
7. Technical parameters
Weight
Windows 98 E/2000/XP/
Vista/7/8, Mac OS, Linux
/M
USB1.1 compatible with 2.0, 3.0
56x18x9mmSize
USB Version
6g
Operating System
Working Voltage 4.5 5.5V –
Laser Output power
10 meters
2400 ~ 2483MHz
1.8 – 3.3VOperating voltage
Frequency range
Laser wavelength
<1mW
640nm
2 x AAA batteries
120x40x20mm
56g (inc. batteries)
Presenter
Power supply
Warning:
Laser radiation
Class laser product
Do not view directly with optical instruments
Do not point at people and animals
Please keep out of reach of children
2
Note:
Please note this instruction is only intended for reference.
August International Ltd reserves rights to revise the product
specifications, features and design without notice.