August MR230 Administrator Guide

How-To Guide
August MR230 Bluetooth Audio Receiver

Check You Have
All the
Components
•MR230 Receiver
•3.5mm Audio Jack Cable
•USB to Micro-USB Charging
Cable
•2 x RCA Audio Splitter Cable
•Instruction Manual
•Quick Start Guide

Ensure You Have The
Adapter and Two Audio
Devices With You
•This Receiver will allow Non-
Bluetooth Speakers,
Headphones and Earphones to
play Bluetooth Audio from
phones, computer, tablet,
laptops and more...

Find the Audio-In Port on Your Device
The Receiver will connect to an Audio input port with the included
cable
Your Audio Input Will Look Something Like
This on Your Speakers, Headphones or
Earphones

Connect The
MR230
Connect the other end of the
3.5mm cable into the
MR230 Adapter AUX OUT Port

Enter Pairing Mode
Have the MR230 Enter Pairing Mode
- Ensure the Switch on the Side is set to ON
- Hold the Circular Button until the LED Flashes Red and Blue
Hold Switch

Enter Pairing Mode
Make Sure Your Audio Source is Also In Pairing Mode
Mobile Computer
(Windows
11)

The LED Will Be Solid Blue –
Connected!
Any Audio From Your Source Device will now Play through the Adapter!