August MR270 Administrator Guide

How-To Guide
August MR270 Bluetooth Audio Transmitter / Receiver

Check You Have
All the
Components
•MR270HD Dual Transmitter
•3.5mm Audio Jack Cable
•USB to Micro-USB Charging
Cable
•2 x RCA Audio Splitter Cable
•Instruction Manual
•Quick Start Guide

Ensure You Have The
Adapter and Two Audio
Devices With You
•This Transmitter will allow Non-
Bluetooth MP3 Players, CD
Players, TV's and more to play
Bluetooth Audio in HD to
wireless Speakers, Headphones
or Earphones...
•Or Play SD Audio to 2 different
devices with multipoint

Find the Audio-Out Port on Your Device
The Transmitter will connect to an Audio output (Headphone) port
with the included cable, or an Optical Audio Cable
Your Audio Output Will Look Something Like This on
Your MP3 Player, CD Player, TV or other Audio Source

Connect The
MR270
Connect the other end of the
3.5mm cable or Optical cable
into the MR270 Adapter AUX
Port

Enter Pairing Mode
Have the MR270 Enter Pairing Mode
- Press the Power Button on the Rear so the Lights Appear
- Press One of the Small Pair Buttons to Enter Pairing Mode

Enter Pairing Mode
Make Sure Your Audio Device is Also in Pairing Mode according to its own instructions
(If you are paring with an August product such as EP650 Headphones or EPG500 Earbuds, pairing
mode is symbolized by a Red and Blue Flashing LED)
Once the devices pair, the LED will be solid Colour
Keep the device close while waiting for the LED to turn Coloured

Any Audio Will Now Play To Your Wireless Headphones, Earphones or Speakers