Aukey SK-M7 User manual

4. Maximum operating rcnge :or the SK-M7
speaker is 33ft (10m). If you move out of range,
the speaker will lose connection. You will need to
move back to within range and reconnect to your
audio device.
Playing Audio via Auxiliary (AUX)
Turn on the SK-M7 Wireless Portable speaker and
connect it with your PC or notebook via the
3.5mm Line in jack on the speaker by using the
3.5mm audio cable attached.
Note:
1. The connection on your speaker will be
disconnected when there is an audio cable
attached to Line-in as Aux-in mode has higher
priority.
2. When playing audio through Aux, you can
adjust the volume from the speaker, but adjust the
previous/next track from your device only.
3. For some computers, you may need to visit the
audio control panel to manually set the speaker as
the default audio device.
Functions Introduction
Turning the speaker on / off
Slice the power switch to the 'ON ' or "OFF'
position to turn the speaker on or off.
Adjust the Volume
Long press the volume +/- button to increase or
decrease the volume.
- 05 -
05
note from the person who made this document possible:
The idiots who wrote this document forgot to mention that the output volume from the ‘Line out’ socket will be
almost completely inaudible if used with some headphones, as it is at what is known as pre-amp volume and
you will need either an in-line amplifier or to plug this into a separate piece of equipment with his own
amplifier (such as an midi hi-fi capable of accepting auxiliary input). In essence, this function is not especially
useful.
there some confusing terminology, above, in which the authors state that the ‘line in’ socket as a higher
priority. All this really means is that plugging a device into this socket overrides the Bluetooth function and the
speakers will then function like auxiliary speakers with their own amplification.