Aukey SK-A2 User manual

User manual
Bluetooth Speaker
Model: SK-A2
Aukey Technology Co., Ltd.
www.aukey.com | [e-mail]
Room 102,Building P09,South China City Electronics Trading Center,Longgang District,
Shenzhen, Guangdong, China

Thank you for purchasing the AUKEY SK-A2 Bluetooth Speaker. Please read this user manual carefully
and keep it for future reference. If you need any assistance, please contact our support team with
your product model number and Amazon order number.
Package Contents
Bluetooth Speaker
USB-A to C Cable
3.5mm Audio Cable
User Manual
Warranty Card
Product Diagram
Power Button
Volume - / Previous Track
Volume + / Next Track
USB-A to C Charging Port
Audio Input
Multi-Function Button

Specifications
Model
SK-A2
Technology
A2DP V1.3, AVRCP V1.6, GAVDP V1.3, HFP V1.7,
HID V1.1, IOPT, SPP V1.2
Audio Output Power
2 × 5W
Frequency Response
80Hz - 20KHz
Signal-to-Noise Ratio
≥ 65dB
Input
DC 5V
Charging Time
3 hours
Battery Life
28 hours
Battery Type
Li-ion (2200mAh)
Operating Range
Up to 10m / 33ft
Dimensions
L 175mm ×W 50mm ×H 67mm
Weight
360±20g
Getting Started
Charging the Speaker
Fully charge this speaker before first use.
Connect one end of the included USB-A to C cable to the charging input port of the SK-A2 and the
other end of the cable to a USB charger or charging port to charge. The LED indicator will be red while
charging and turn off when fully charged. Charging takes around 3 hours.
Controls & LED Indicator
BT Mode
Functions
Instructions
Turn speaker on / off
Press and hold the power button for 2 seconds
Switch mode
Short-press the power button (between BT and
AUX mode)
Enter or exit TWS mode
Double-click the power button
Play or pause
Short-press the multi-function button
Adjust volume
Short-press volume + / - (synchronized with the
volume of the iPhone, not Android)
Skip to next / previous track
Long-press volume + / -
Answer or end the call
Short-press the multi-function button
Reject an incoming call
Long-press the multi-function button
Redial last-outgoing-called number
Double-click the multi-function button in standby
Disconnect BT
Long-press the multi-function button

AUX Mode
Functions
Instructions
Turn speaker on / off
Press and hold the power button for 2 seconds
Adjust volume
Short-press volume + / - (synchronized with the
volume of the iPhone, not Android)
Play or pause
Short-press the multi-function button
TWS Mode
Functions
Instructions
Turn speaker on
Press and hold the power button of both
speakers for 2 seconds
Turn speaker off
Press and hold the power button of any speaker
for 2 seconds
Enter or exit TWS mode
Double-click the power button of the mater
speaker
Play or pause
Short-press the multi-function button of any of
the two speakers
Adjust volume
Short-press volume + / - of any of the two
speakers (synchronized with the volume of the
iPhone, not Android)
Skip to next / previous track
Long-press volume + / - of any of the two
speakers
Answer or end the call
Short-press the multi-function button of the
mater speaker
Reject an incoming call
Long-press the multi-function button of the
mater speaker
Redial last-outgoing-called number
Double-click the multi-function button of the
mater speaker in standby
Disconnect BT
Long-press the multi-function button of any of
the two speakers
Powering On / Off
Press and hold the power button for 2 seconds to turn on/off the speaker
Pairing
1. When you turn on the speaker, it will automatically enter pairing mode
2. Activate the pairing function on your phone pr other compatible device and select “SK-A2”
3. If a code or pin is required for pairing, enter “0000”
4. When successfully paired, you will hear a tone

Note
If you want to use another device to connect to SK-A2, please long press the multi-function
button to disconnect SK-A2 from the current device. Then repeat the previous “Pairing” steps
When you turn the speaker on, the speaker will automatically reconnect to the last-paired device
or enter pairing mode if no paired device is found
When the speaker is paused or there is no BT connection, the speaker will automatically shut
down after 10 minutes
If the speaker or connected device exceeds the operating range, the speaker will disconnect. The
connection to the last successfully connected device will be re-established once you re-enter
wireless range within 10 minutes. To connect to other devices, repeat the previous “Pairing”
steps
Playing Audio via Audio Input Connection
Connect the SK-A2 to your PC, laptop, or other device with audio output port using the included
3.5mm audio cable. If the two speakers are in TWS mode, please connect the mater speaker to the
device you need using the included 3.5mm audio cable.
Note
The speaker will disconnect from your phone or other paired devices when an audio cable is
plugged into the audio input jack. Short-press the power button to switch back to BT mode
When playing audio using the audio input jack, press the volume + / - to adjust the volume and
short-press multi-function button to pause or resume. Next / previous track control on the
speaker is disabled in audio input mode
For some computers, you may need to access the audio control panel to manually set the
speaker as the default audio device
TWS Mode
1. Turn on two SK-A2 speakers at the same time, double-click the power button of one of the
speakers to automatically enter the TWS pairing mode, a tone will be heard every three seconds
2. During the TWS pairing process, double-click the power button to cancel the TWS pairing. If the
TWS pairing exceeds 60 seconds and the TWS pairing is not successful, it will automatically
return to the normal BT mode
3. After the TWS pairing is successful, one of the LED lights of the two speakers is always on (this is
the slave) and the other is flashing (this is the mater), and the TWS pairing success tone is the
same as the BT connection success tone
4. Activate the pairing function on your phone pr other compatible device and select “SK-A2”
5. If a code or pin is required for pairing, enter “0000”
6. When successfully paired, you will hear a tone

Note
When the phone is connected to the Bluetooth of one of the speakers first, you need to
double-click the power button of the speaker connected to the phone to enter the TWS pairing
mode
After the TWS pairing is successful, double-click the power button of one of the speakers to
automatically exit the TWS pairing mode, and the BT connection between the mater speaker and
phone will not be disconnected. Double-click the power button of the mater speaker to enter
TWS pairing mode
If the Bluetooth of the two speakers and the mobile phone are connected successfully. Please
cancel the Bluetooth connection between one of the speakers and the mobile phone.
Double-click the speaker that is successfully connected to the phone to enter the TWS pairing
mode
In TWS mode, directly press and hold the power button for 2 seconds to turn off, and the SK-A2
TWS will automatically connect back after power on. But if you double-click the power button to
disconnect the TWS pairing, and then turn it off and on again, TWS cannot automatically connect
back
If the two speakers or connected device exceeds the operating range, the speaker will disconnect.
The connection to the last successfully connected device will be re-established once you re-enter
wireless range within 10 minutes. To connect to other devices, repeat the previous “Pairing”
steps
FAQ
The TWS pairing is unsuccessful?
Please check if the phone is connected to the Bluetooth of the two speakers at the same time. If yes,
please long press the multi-function button of any of the two speakers to disconnect any speaker BT
from the phone. Double-click the power button of the speaker that is connected to phone to enter TWS
pairing mode. If not, please double-click the power button of both speaker to enter TWS pairing mode.
From TWS mode to AUX mode?
Connect the master speaker to the required equipment with an audio cable. Short-press the mode
button to switch back to BT mode.
Product Care & Use
Keep away from extreme heat and strong magnetic fields
Do not use this speaker at high volume for extended periods, as this may cause permanent
hearing damage or loss
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with
your region. Please include your Amazon order number and product model number.

Amazon US orders: [e-mail]
Amazon EU orders: [e-mail]
Amazon CA orders: [e-mail]
Amazon JP orders: [e-mail]
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased
from a different seller, please contact them directly for service or warranty issues.