Auta 702105 User manual

V1.0
MU-17
dimensions 79 (wi) x 217 (hi) x 50 (de) mm DING DONG function (flat bell)
su face mounting exte nal functions (lights, ga age, etc...)
call volume selection AUDIO HD system
melody selection self-sta ting function
No. of tones selection INTERCOM up to 6 points
AUX 2
AUX 1 / ON
MELODY
selector
calling
VOLUME
status
LED
SPEAKER HANG
switch
MICRO
SPECIAL
functions
OPENING
CONCIERGE calling
INTERCOM calling
VIDEO-SPY
SELF-STARTING
AUX 2
AUX 1 / ON
ref: 702105
COMPACT
INTERCOM
handset

calling and conversation
When a call is received from the entrance panel, the phone starts ringing for a maximum of 30 seconds. As standard,
it performs 4 rings with intervals of 4 seconds between each of them.
During the call period, the user can open directly by pressing the button , or pick up the handset to establish a
conversation. he conversation has a maximum of 90 seconds. If you want to continue with the conversation, press the
button
AUX 1/ON
INTERCOM calling
When the phone is on standby, press the button as many times as the internal monitor number you wish to call. he monitor
makes a conirmation tone with each press and the status LED lashes as many times as the monitor number to which the call will be
made. After the handset is picked up, the system will activate automatic communication with the selected monitor.
self-staing
By pressing the button the user can establish communication with the PANEL. In the case of more than one panel
is present in the installation the system will do the self-starting to the last one from which it recieves a call.
Once the communication is established, an opening can be made by pressing the button
AUX 1/ON
calling to concierge
If the phone is in standby, handset is picked up and the button is pressed, a call will be made to the concierge
unit. If the system does not have a concierge unit installed, the phone will emit an error beep.
ding dong function
he phone allows to replace the interior bell of the house, this integrates the two calls (outside panel and house bell)
in a single device. hese calls will be dierentiated with dierent melodies and lashes automatically. In order to have
this function, you only have to connect the button of the house bell to the phone.
external functions
he monitor has 1 independent push-button that allow auxiliary functions, such as garage doors, lights, irrigation,
etc ...
o do this, an Auta auxiliary relay must be connected to the control circuit we want to control.
adjust of the calling volume
o adjust the volume of the call, insert a clip or similar through the indicated hole and press with it lightly.
he phone has two volume levels (MEDIUM and HIGH)
melody selection
o select a ring tone, you have to pick up the handset and press the hang switch with your inger. With it pressed, a clip
or similar must be inserted in the indicated hole and press with it lightly.
Each press selects a dierent melody from 8 ones available.
Functioning