Auto Page C3-RS-730 LCD User manual

1
C3-RS-730 LCD
PROFESSIONAL 2-WAY LCDREMOTE CAR STARTER & ALARM
SYSTEM
With
Built in Temperature, Voltage Sensor
And Two-way Serial Port Data Link
Compatible
OPERATION MANUAL
Please register your product at:
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR P
ROFESSIONAL INSTALLATION ONLY

2
Congratulations on your purchase of the RS-730 LCD remote start vehicle security system. We sincerely
hope the purchase of the RS-730remote start security system gives peace of mind to you.
The RS-730LCD is a state-of-the-art two-way communication system. Please take the time to read over this
manual to thoroughly familiarize your self with the many features and options of the RS-730LCD.
Auto Page, Inc. has over 25 years of experience in the vehicle security industry in the United States and is a
wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan. Iwata has been an industry leader for over 50
years, establishing a reputation for ingenuity in its engineering capability and innovativecommunication
products. Auto Page and Iwata maintain a long tradition of providing the best value to their customers.
WARNINGS:
As with any product that performs automatic functions, there are certain safety precautions that you must
practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is corrected.
8. The use and operations of this system isthe sole responsibility of the operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
10.It is not safe to remote start the vehicle if the vehicle is parked on a steep incline.
LCD REMOTE CONTROL TRANSCEIVER: XT-74 LCD

3
A. BATTERY REPLACEMENT:
This system needs no specific maintenance beyond remote control battery replacement. The 2-way
remote is powered by a 1.5V AAA battery. The 1-way remote is powered by a pair of 3V, CR2016batteries.
Battery Level Indicator (2-way remote)
The Battery Level indicator hasthree level indicators that serve as a visual indication of battery charge.
Whenthe batteryreaches a low charge level that requires replacement, the remote controlwill generate a
single notification chirp, and the Battery Level indicator will flash continuously.
Gently pull the end of the battery door away from the top of theremote control then slide the door up to
expose the battery andremove the expired battery. Place the new battery into the remote. When power is
returnedthe rem ote control will display all icons in the LCD and generate all beeper tones once. Press
any button on the remote to terminate the beeper tone review.
B. STANDARD LCD ICON CONFIGURATIONS:
The lock icon will be displayed when the
door locked.
The unlock icon will be displayed when
thedoor unlock
Sensor Bypass
Sensor 1 bypass under Arm mode
HiddenAlarm Mode
The security system arm with hidden
alarm function(silent alarm)
Valet Mode
Remote start and alarm functionsshall
be temporarily on hold.
Hood Trigger
Hood is illegally opened (Zone 1)
Trunk Trigger
Trunk is illegally opened (Zone 2)
Door Open Warning
Doors are illegally opened (Zone 3)
Sensor Trigger
Trigger on Sensor 1 (Zone 4)
Ignition Trigger
Ignitionswitch isillegally turned on (Zone
5)
Systemtrigger
Remote Transmission
You are transmitting the signal to control
unit
In –RangeIndicator
You are within the range of the remote
control.
AntiCar-Jack Mode
Activate the anti car-jacking mode
Icon flash under check mode
EngineCranking
Your vehicle engine Cranking by remote
control
Engine Running
Your vehicle's engine is running
Timer Control Start
Engine start automatically every 2 or 3
hours.DailyStart
Engine start automatically at the same
time next day
TemperatureStart
Engine start automatically when reach
programmed temperature.
Turbo Timer
Turbo timer was set up

4
Manual Gear
Engine S
tart Memorizing for the car with
manualgear wasset up
Activate Channel 3 (Trunk Release).
Activate Channel 3
Activate Channel 4
12:00
Time Monitor
12:00 Alarm Clock You have set morning call alarm
Parking Meter
Reminderwhen timeis upfor parking Low Battery You have to replace the battery of remote
control.
Melody Mode
Remote Control alert user through
melody sound
Vibration Mode
Remote Control vibrates when the
system is triggered
OPERATION:
C: REMOTE TRANSMITTER OPERATION:
Transmitter
Button System Function Remark
Lock Doors & Arm System
Panic function PressandHoldfor 3 seconds.PressTrunk
button to stop panic function
CarLocator Press when inarmed mode
-Arm and Delete The 2 Stage Shock
Sensor Press twice within 3 seconds. Pass will appear
on theremote
-Arm System and Hidden Alarm Function Press within 3 seconds and Hold
button for 2 seconds
+ Silent Arming / Disarming Ignition in "off" position.
+ Active Anti Car-Jacking Mode Ignition in "on" position press and hold for 2
seconds
Unlock Doors & Disarm System
-Two Steps Door Unlock & Disarm
System(optional) Press twice within 3 seconds.
Trunk Release (Channel 3) Press and Hold for 2 seconds
-PassiveArming By-pass While the system Disarmed.
Activateor Turn Off The Remote Start Pressbutton once. Press Twice if set to start
safety mode
+Channel # 4 Timer Output (4)Optional
II Switching code For 2nd Car Operation.For regularXT-33remote transmitterOnly
DCHIRP INDICATORS: PARKING LIGHT:
ChirpFunction Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2flashes Disarm
3 chirps Defective Reminder 3flashes Disarm / Triggered
4 chirps Disarm / Triggered 12 flashes Car Locator
6 chirps Car Locator Constant On Under Remote Start
ALARM OPERATING CONDITION:
Siren / Horn Parking Light LED Doors Starter Dome Light
1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable
2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking Turns on for 30
-second

5
3. Trigger Alarming Flashes Slow Flash Disable Flashes
4. Passive
Starter
Disable Fast Flash Disable
5. Panic Alarming Flashes Flashes
6. Car-Jacking Alarming Flashes Disable Flashes
7. Car Locator 6 Chirps 12 Flashes Locking
E. ACTIVE ARMING –LOCK & ARM:
1.Press buttonon the transmitter.
2.The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle’s doors will lock upon arming if interfaced with the security system.
DEFECTIVE SENSOR REMINDER: Ifthesirensounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the transmitter and buttons at the same time. This will arm or
disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the
vehicles parking lights only.
SENSOR BY-PASS:
The sensor bypass feature is programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle.
Sensor By-Pass :Press the button two times within 5seconds will arm the security system and
by-pass the shock sensor.
HIDDEN ALARM FUNCTION:Silent Alarm
Pressthe button first; within 3 seconds press the button to activate the hidden alarm function. The
security system will arm and with “Hidden Alarm Function” The siren / horn will be silenced even if the
sensor is triggered in the armed status. Alarm indication will only appear on the LCD Transmitter.
F. PASSIVE ARMING (Programmable)
Active arming / disarming is controlled by your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle
entrances are closed.
3. After the 30-second timehas elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
The vehicle doors will automatically lock after the passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system is disarmed, Press the button twice, the system will respond
with [1] chirp and LED will turn “ON”. The security system will remain in this temporary state for as long as you wish.
To exit passive by-pass, press the transmitter or buttonsand the system will return to normal status.
G. ACTIVE DISARMING–UNLOCK & DISARM:
1. Press button on the transmitter.
2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed.
The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming. (Note: Power door
locks and dome light must be installed with the security system.)

6
TAMPER DISARMING: If the alarm is triggered,upon disarm the system’s siren will chirp 4 times, and the
parking lights will flash 3 times telling you the alarm has been triggered during the last armed state.
PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights
“ON” for 30 seconds and for 10 seconds upon the lock signal.(Programmable)
TWO STEPS DOOR UNLOCK(Optional): This feature will independently unlock the driver’s door only when
disarming the security system. Pushing the button a second time within 3 seconds will unlock the other
doors.
AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in 60
seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before
the 60 seconds timer has elapsed.
H. DISARMING WITHOUT A TRANSMITTER
OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE: (Factory Default Setting)
The Override function may be used if the remote transmitter is lost or inoperative.
1.Enter the vehicle and turn the ignition switch to the 'ON’ position.
2.(Alarmwill sound.)
3.Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter the disarm
mode. You can now start and operate the vehicle normally.
OVERRIDE THE ALARM WITH PASSWORD PIN CODE:
Unlike valet switch that can easily be found and defeated, this security system allows the consumer to
program a password pin code offering a higher level of security.
1. Enterthe vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 5 seconds, enter your chosen first digit code by pressing and releasing the Valet Switch. (When
finished above procedures, system's siren will stop alarming, lights will stop flashing, but the vehicle
can’t be started.)
3. Within 15 seconds of the last digit code enter (the 1st code), then turn the Ignition Switch “OFF” and then
“ON”.
4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet Switch.
5. Turn the ignition switch “OFF” position. 4 Chirps from siren/horn and 3 flashes from the parking light
indicate the system has disarmed.
Note:You must override the alarm within 60 seconds. If not, the system will automatically re-arm.
EXAMPLE: To Override the Systemwith the Password Code 83,
1. Enter the vehicle and turn the ignition switch to the 'ON’ position.
(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the system's siren will
stop alarming, lights stop flashing, but the vehiclecannot be started or driven away.)
3. Within 15 seconds of entering the last digit code enter (the 1st code), turn the Ignition Switch “Off” and then
“ON”.
4. Within 15 seconds, Press and Release the Valet Switch 3 times.
5. Turn the Ignition Switch to the “Off” position. 4 Chirps form siren/horn and 3 flashes from the parking lights
will indicate the system has disarmed.
I. VALET MODE:
VALET MODE:(System is inDisarm Mode)
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your
transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm
functions and remote start functions are bypassed, however, the remote panic feature and remote door

7
locks will remain operational. To use the valet mode, the system must first be disarmed either by using your
remote transmitter, or by operating the Manual Override sequence.
Get into/out valet mode using the ignition key.
Enter Valet Mode:
a). Under disarm mode, turnthe ignition to “ON” position.
b). Pressand hold valet switch for 2 seconds until the LED turns ON solid. The LED will remain on as
long as the system is in 'valet mode'.
ExitValetMode:
a). Turn ignition 'ON'.
b). Push and hold valet switch for 2 seconds, The LED will turn off indicate the system are exiting the
valet mode.
J. CAR LOCATOR
Under armed mode, press the button to active car locator function. The siren will chirp 6 times. The
parking light will flash 12 times, for you to easily locate your car.
K. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the alarm in case of emergency.
1. Press and hold the button for 3 second. The alarm will immediately sound.
2. During panic mode, the normal functionof this transmitter button will be disabled. The transmitter and
buttons can be used to lock and unlock the door (if the option is installed), however once the button is
pressed, the vehicle’s starter disable device, (where installed) will be disengaged allowing the vehicle to start.
3. To stop the alarm, pressthe trunk button on the remote control
4. If the button is not pressed, the alarm will automatically stop after 30 seconds.
L. TRIGGER THE SYSTEM
Whenarmed, yourvehicle is protectedas follows:
Light impact will trigger the warn-away signal.
Heavy impacts / Doors open /(if installed) Hood open / (if installed) Trunk open / Turning on the ignition key
will trigger the programmed sequence.
The starter disable relay (if installed) prevents the vehicle’s starter from cranking. The siren, horn, parking
lights, and dome light will turn on alerting of an intrusion for 30 seconds. Then it will stop and automatic
reset and re-arm. If the any one of the sensors or detectors is still active, the alarm system will sound a
maximum of 3 times of 30 seconds cycles.
NOISE ABATEMENT CIRCUIT: Your system has a “Noise Abatement Circuit”. It prevents annoying repetitive
trigger sequences due to faulty door pin switches or environmental conditions such as thunder,
jackhammers airport noise, etc.
Here’s how “Noise Abatement Circuit” works: The alarm triggers five times. Each time, the same sensor
or switch has triggered the alarm; the “Noise Abatement Circuit” will interpret this pattern of triggers as a
false alarm. After the third trigger, the “Noise Abatement Circuit” ignores, or bypasses, that sensor or switch
until a different sensor or switch is trigger.
“Noise Abatement Circuit” covers doors (Hood/Trunk) differently: If the alarm is triggered by an open door
for Three full cycles, the doors will be bypassed until the trigger ceases.
M. ANTI CAR-JACKING (Programmable)
Warning: If you don't need the carjacking function in this alarm system, be sure to set carjacking feature
“OFF”.This systemsdefault setting is “OFF” for allcarjacking modes.
ACTIVE ANTI CAR JACKING:

8
1.When the Ignition is ON press Fbuttonfour times while“CAR JACK”is flashing in the text area, then
press button to activate Anti Car-Jacking mode or
Under ignition ON,press and hold the and buttonsat the same time for 2 seconds. The parking
lights will turn on for 1.5 seconds to indicate the systemhasentered theanti car-jacking mode.
2. Once the system in anti car-jacking mode, the system will be triggered when anydooris opened and
closed while the ignition is “ON”.
PASSIVE ANTI CAR-JACKING:(Programmable)
It will operate as noted below:
1.Turn the ignition switch to the “ON” position and the system will arm.
2.Once the system is armed, if you are forced from the vehicle, the system will trigger when the door is
opened and closed while the ignition is “ON”.
TRIGGERING THE ANTI CAR -JACKING MODE:
A). 50 seconds after the system has been triggered. The siren will start chirping for 15 seconds.
B). During this 15 second period of chirping, you will be alerted to push the valet switch once to turn off the
car-jacking feature. If not, it will enter a second timer for carjacking.
C). 65 seconds after the system has been triggered, the siren will start sounding and the parking lights will
start flashing.
D). 90 seconds after the system has been triggered,
1. The siren will sound and the parking lights will flash, and
2. The starter disable will activate to prevent the vehicle from starting.
3. It will remain active until the vehicle's battery power is exhausted.
OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR-JACKING:
Turn the ignition switch from OFF to ON, and within 10 seconds push valet switch, the siren will stop and the
system disarmed
Note: If you use password pin code to double protect the vehicle security, you will need to use it to completely
disarm the system.
N. SYSTEM’S TRIGGER CHECK (For two-way transceiver operation only)
Press and hold Fbutton of LCD remote until 3 beeps sound , release and re-press Fbutton again, the
LCD remote will show “ALARM “icon flash on text area (see advanced users mode), then press
buttonto activate system trigger check.
Note: If the system has no responsethen you are out of range.
O. SYSTEM’S STATUS CHECK(For two-way transceiveroperation only)
PressFbuttonof LCD remote until 3 beeps sound , the LCD remote will show “STATUS “icon flashing
in the text area(see advancedusers mode),then press button to activate system status check.
It responds with one melody sound and allvehicles’ status records will immediately displayed on the LCD
screen.
Note: If it has no response then you are out of range.
P. DRIVER PAGING / LOST& FOUND (For two-way transceiveroperation only)
This feature is useful the event that someone wants to page the driver of the parked vehicle or someone
cannotfind his LCD remote transceiver.
Underthe ignitionswitch “OFF” condition, press and hold the valet switch for 2 seconds to page the driver,
one chirp sound shall be emitted from the vehicle and the paging melody sound continues sounding from
the RemoteLCD transceiver.

9
Q. DOME LIGHT CONVENIENCE SUPERVISION (Optional Feature)
The alarm has a unique feature that will turn on your vehicle dome light as follows:
1.Upon disarming, the interior light will remain on for 30 seconds.
2.If the vehicle is intruded, the interior light will flash for the same duration as the siren.
Note: Turning on the ignition switch or arming the alarm will turn off the dome light.
R. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)
If the vehicles door locks have been interfaced to the security system, the system will automatically lock the
vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is
turned “OFF”. (Default setting is “OFF”)
S. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold button on the transmitter for two seconds to remotelycontrol the trunk release.
T. CHANNEL 4 TIMER CONTROL OUTPUT.
Press the transmitter and buttonsat the same time to active Channel 4 function.or
Press and hold Fbutton of LCD remote until 2 beeps sound , release and re-press Fbutton the LCD
remote will show“CH 4”icon flash, then press buttonto activate channel 4 function.
Channel 4 is user-programmable timer output. You may program the built-in timer to send a ground signal
for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on
the headlight, power window or sunroof. (Factory defaults setting at momentary output.)
U. POWER SAVER MODE (Default OFF) * See advanced user mode
Under Menu mode press button while “POWERSAVE”icon flash, press button Power save ON,
while the power save mode, the LCD remote transceiver use “0” current to save the battery power.
Press button Power save OFF
Exit: Press any button of the LCD remote transmitter to exit “Power Save Mode”.
V. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state if the
power is lost and thenreconnected.
W. SECOND VEHICLE SECURITY OPERATION:
Your 5-button remote transmitter can be utilized to control a second vehiclessecurity system, To program
the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
* For thestandard transmitter (II) is shift button.
Standard Transmitter
1. Prior to pushing any button on the transmitter. Press the Select IIbutton first on the transmitter.
2. Once II button is pressed the LED on the transmitter will illuminate for 3 seconds to indicate the second
transmitter pin code has built-in.
3. While the LED is illuminated, press any button on the remote control transmitter to control a second
vehicle security system.
4.
For LCD transceiver–2nd car operation :
a. Press and holdFbutton of LCD remote for 1 second until 2beeps sound and then release theFbutton.
b. The text will flash on the LCD screen, press button to enter the menu.
c.Press or button to move upor downin the menu, find CAR SELECT on themenu.
d. Press button to select the option you would like to adjustCAR 1 or CAR 2 for further operation.
Caution: If the LCD transmitter does not function. Please insure it is set to operate car #1

10
X. Clear the Flash Icon and Melody Sound:The Transmitter will reset the flashing icons the
next time the Ignition is cycled to the ON position.
Y. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert the user
through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop
melody sound only.
Z. Vibration / Melody Mode: (see advanced users menu for more info)
Press and hold the Fbutton until 2 beeps are heard. You will see the word .Press the trunk button
to
scroll through the menu. Scroll to the word “ Vibrate”. When you see the word “Buzzer Vibrate”,
press the trunk button oncetoenterprogramming. Press the button to change the setting. (Buzzer, BZ VIB,
Vibrate). Once a setting is chosen. Press the button to confirm.
REMOTE START OPERATION:
A. TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press button once on the transmitter.
2. The parking light will activate to indicate the remote start received the signal.
3. The engine will start inapproximately5seconds.
4. Once the engine is running, after couple seconds the parking lights will turn on and the climate controls
will activate and adjust the vehicle’s interior temperature to your preset setting. (While the vehicle is running,
the “minutes” digit on the LCD screen will flash and the will indicatecountdown timer based on the 5, 10,
20 or 30 minute run time set up by your installation center.)
5. The vehicle will run for a programmable 5 to 30 minute cycle before shutting down. (When the unit
shuts off thecountdown timer will turn off and the transmitter will play a melody.)
NOTE: The Remote Start Unit will not start the vehicle if any one of the following conditions exists:
1. The hood is opened.
2. The brake pedal is pressed.
3. The optional remote start enable toggle is switched to the “OFF” position. (If installed)
4. The gear selector is in any gear other then “PARK” or “NEUTRAL”.
SAFE START (Child safety mode)
Factory default is set to press the button once on the transmitter to start the vehicle. You can program this
feature to eliminate an accidental remote start:
1. The user presses the transmitter buttons twice within 3 seconds to start the vehicle. or
2. The user presses the transmitter and buttons at the same time to start the vehicle.
NOTE: Contact your installing dealer to activate this feature.
B. OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START:
To operate the vehicle whilethe engine is running from the remote start,
1.Insert the ignition key and turn itto “ON” (not the start) position.
2.Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down.
C. TEMPORARY STOP FEATURE:
This feature allows the vehicle to remain running after the key has been removed from the ignition. This
feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would
like to leave the motor running and the climate control on.

11
1. Before turning off the engine, press the button once on the transmitter and the LED indicator will flash
3 times to confirm enter.
2. Turn the ignition key to OFF position. (The engine will stay running.)
3. The engine will run until the pre-programmed time elapsed or shutdown input is received.
D. TURBO CHARGE MODE:
Turbo charger mode keeps the engine running after arriving at yourdestination for a programmable period
of 1, 3 or 5 minutes, This allows the vehicle’s engine time to conveniently cool down the turbo after you have
left the vehicle.
To activate:
1. While the engine is running, pull up the hand brake and place the transmission gear in the park position.
2. Before turning off the engine, press and release and buttons at the same time.
-- The LED will flash indicating the remote start has entered the turbo charger mode appear on
LCD remote.
3. Take the “Ignition Key” from the key cylinder.
--Engine keeps running. --
4. Exit and secure the vehicle.
--Engine continues running until the pre-programmed time elapsed.--
NOTE: This feature only applies to vehicles with TurboCharged Engines.
E. TIMER START:
This unit can be programmed to start and run the engine every 3 hours or punctually at the same time next
morning,the engine will run for the programmed running time and thenshut down.
IMPORTANT: Timer Start should be used only in open areas, never start and run the vehicle in on
enclosed space as a garage or carport.
Daily Timer Start:The feature is very useful for the driver who wants to run the vehicle punctually at the same
time next morning. Before set-up of the “Daily Timer Start”, you should set you time for engine start.( see
Timer Setting / Timerset-up for “Daily Timer Start, in Advanced users Mode)
ENTER:
1. Press the button once to remote start the vehicle. As soon as the vehicle is running and the parking
lights have turnedON or are flashing.
2. Immediately depress the button once, within 2 seconds
3-a. 3Hours Timer Start: Rapidlydepressesthe button (or depresses +buttons, if you program
+buttons = Start / Stop button.) The parking light will flash (3) times / icon appear. The siren
or horn chirps (3) times. The vehicle is now programmed to start every 3 hours.
3-b. Daily Timer Start: Depress the transmitter’s “
F
” button first, within 3 seconds press the button. The
parking light will flash (6) times. The siren chirps (6) times. The vehicle is now programmed to start at the
same time of the next day. Your set time for the next day engine start flashes for approx. 3 seconds on the LCD
screen. After 3 seconds icon stays displayed on the LCD screen.
Or Follow programmed Daily Start Timer on LCD remote in Advanced user mode.
Press button of LCD remote transceiver to activate or cancel Daily Start feature.
3. Press the brake pedal to stop the vehicle running.
4. Please insure that you fully understand this feature before programming the timer start mode.
Exit the timer start: Timer start can be exited manually as follows:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition on. The LED and parking light will flash (4) times. The horn chirps (4) times. Or
1. Press the button twice to remote start the vehicle. As soon as the vehicle is running and the parking light
have turned on or flashing.

12
2. Immediatelydepressthe button then press and hold the button for 2 seconds. (or depresses +
buttons, if you program +buttons = Start / Stop button.) The parking light will flash (4) times. The
siren or horn chirps (4) times. The vehicle is no longer programmed to start automatically.
F. TEMPERATURE CHECK
With the built in temperature sensor you can monitor, Through the LCD screen, the present indoor
temperature of the passenger compartment of your vehicle.
Press and hold the transmitter “F”button firstuntil 3 chirps are heard. Then press the FButton three
more times so that TEMP appears on the remote. Within 3 seconds press button; the in-door
temperature will be shown on the LCD screen. This reading may be higher than actual ambient temperature
due to the greenhouseeffect and is relative onlytothe inside vehicle temperature.
G. TO TURN OFF THE REMOTE START:
When the engine is running (by remote start), if you want to stop it,
1. Press button once on the remote transmitter under theremote start mode.
2. Move the optional remote start enable toggle switch to OFF position. (If installed)
3. Press the brake pedal
The vehicle will shut down and turn off the parking light to indicate the enginehas stopped.
H. SHUT-DOWN INPUT FOR REMOTE STARTER:
If any of the following conditions exist while the system is operating, the engine will not start or will shut
down immediately:
1. The hood is opened.
2. The brake pedal is pressed.
3. Theparking (hand)brake is released (For Turbo Timer Mode)
4. Engine is over-revved. {“Tachometer checking type” only}
5. The pre-programmed run time(5 /10 / 20 / 30 minutes) haselapsed.
6. Press button on the remote transmitter under remote start mode.
7. The system trigger.
8. The vehicle refused to start running after {3} unsuccessful attempts.
I. DISABLING THE REMOTE START SYSTEM: (If installed)
This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle from
being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an
enclosed area. To disable the remote start, move the optional remote start enable toggle switch to the OFF
position.
ADVANCED USER’S MODE:
C. LCD REMOTE CONTROL TRANSCEIVER OPERATION:
Enter: Press and hold FButton until beep sound respond from LCD transceiver indicate into table 1 –5
as below.
Exit:Pressthe , or button to exit this mode.

13
Table 1:ONE beep to confirm (Press and hold until ONE Beep is heard)
F
Button LCDDisplay Button
Press once Backlight turns on for 5 seconds
Press twice within 5
seconds PASS and PASSicon flashing Press buttonto arm the alarm and bypass the sensor 1.
Press three times
within5 seconds HIDDEN ALARMand
icon flashing
Press buttontoarm system and
with Hidden Alarm Function.
Press four times within
5 seconds CAR JACKand
icon flashing
Ignition in "on" position press and
hold button for 2 seconds to
activate anticarjackingfunctions.
Table 2:TWO beeps to confirm (Press and hold until TWO Beeps are heard)
F
Button LCD display Button
Press and hold the
F
Button for 2 seconduntil
2 beeps sounded
MENU flashing Press button to enter the menu
mode
Press onemoretime
within5 seconds CH 4 flashing Press button to activate channel4 function
Table 3:THREE beeps to confirm(Press and hold until THREE Beeps are heard)
F
Button LCD display Button
Press and hold the
F
Button for 3 seconduntil
3 beeps sounded
STATUS and
icon flashing Press button to check theVehicle Status.
Press ONEmore time
within5 seconds ALARMand Press button to check thesystem trigger condition.
Press TWO more times
within5 seconds Voltage and Check Press button to check theVehicle Battery condition.
Press THREEmore
times within 5 seconds TEMP and icon flashing Press button to check theInterior Temperature of the vehicle
Press FOUR more
times within 5 seconds Start timer and
icon flashing
Press button to activate or cancel
daily start.
Table 4:FOUR beeps to confirm (Press and hold until FOUR Beeps are heard)
F
Button LCD display Button
Press and hold the
F
Button for 4 seconduntil
4 beeps sounded
DEMO mode Press button to activate Backlight
will beON until DEMO operation end.

14
Table 5:Do-Re-Mi sounds to confirm
F
Button LCD display Button
Press and hold the
F
Button for 6 seconduntil
Do-Re-Mi sounded
DEFLT flashing Press& hold buttonfor 2 seconds
to back to default setting and 1 chip for
confirm
D. PROGRAMMING LCD REMOTE:
Selecting and Adjusting Menu options:
•?Press and hold Fbutton for 1 second until 2 beeps sound, then release theFbutton.
•?Thetext will flash on the LCD screen,press buttonto enterthe menu.
•?Press button to move up in the menu or button to move down in the menu.
•?Press button to select the option you would like to adjust.
•?Press button to increase the value, to activate or deactivate a function or to toggle through
•the selection.
•?Press button to decrease the value, to activate or deactivate a function or to toggle
•throughthe selection.
•?Press button to move to the next sub-optionorgo back tothemain menu.
•EXIT: Press button to exit the menu mode.
Order Menu Option LCDdisplay Functions
1 Parking Menu PARK METER Default is
-Parking hours 0:30
0 is flashing , -Adjustsparking hour
(value from 0 to 2).
-Parking
minutes 0:30
30is flashing
, -Adjusts parking minute
(value from 0 to 59).
-Toggle Parking
countdown +or
-Enablesparking countdown.
There is a beep 5 min. before theParking
countdown reaches 0.
-Disablesparking countdown.
2Illumination Menu Default is
-Toggle
IlluminationMode 3 SEC. or
5 SEC. or
OFF
, Basic operation with backlight
Illumination 3 SEC. or 5 SEC.;
OFF –basicoperationwithout backlight
Illumination.

15
3Second Vehicle
Security Operation
Menu
Default isCAR 1
-Car Select CAR 1 or
CAR 2
-CAR 1 operation.
-CAR 2 operation.
4Clock Menu Default is
-Clockhours
12:00AM
12is flashing , -Adjusts clock hour from 0 to 12
-Clockminutes
12:00AM
00is flashing , -Adjusts clock minute from 0 to 59
5Alarm Clock Menu Default is
-Alarm hours
12:00AM
12is flashing , -Adjusts alarmclock hourfrom 0 to 12
-Alarm minutes 12:00AM
00is flashing
, -Adjusts alarmclock minute from 0 to 59
-Toggle alarm
ON +or
OFF -Enable alarm clock or
-Disablealarm clock
6Back Light Color COLOR Default is COLOR 7
COLOR 1-7, -Adjusts colorfrom Color 1to Color 7
7ConfirmationMenu
VIBRTE Default is
-Toggle BZ VIB
+ or
VIBRTE+ or
+
+
, -Buzzeror Vibration
8Button Lock Default is
-Togglebutton
lock
-button lock /Disablethe transmission
function temporarily
-button unlock / Enable the transmission
Function.
9Power Save Default is
-Togglepower
save
-While the power save mode, the LCD remote
transceiver uses “0” current to save the
battery power.
-Power save OFF
Exit: Press any button of the LCD remote
transmitter to exit the “Power Save Mode”.
10 Daily Start Timer
Setting
Daily Start Time Adjust Only (ex. 7:30AM)
-Daily Start Hour 7:30AM
7is flashing , -Adjusts clock hour from 0 to 12

16
-Daily Start
Minute
7:30AM
30isflashing , -Adjusts clock minute from 0 to 59
ToExit: Do not push any buttons for 20 seconds
LIMITED LIFETIME WARRANTY PROVISIONS
( U.S. ,Continental U.S. and Canada Only)
1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the
factory prior to delivery. Your Auto Page equipment is guaranteed for “life” to the original
purchaser/user of the equipment and the original vehicle in which it was installed by an authorized
installer under the following conditions: If the product proves defective (according to Auto Page's
testing) within the first year, the defective unit may be exchanged or repaired free of charge.
“Proof of Purchase” (dated sales receipt) must accompany all warranty returns; otherwise, your
return will be rejected and sent back. After one (1) year, the purchaser should ship the unit
prepaid to Auto Page with a money order in the amount of $30.00 to cover shipping and handling
charges. Note: The product needs to be registered online at time of installation.
www.autopageusa.com
2. Exclusion to the Limited Lifetime Warranty Provision: All two-way LCD and two-way OLED
remote transceivers are excluded from the Limited Lifetime Warranty noted in paragraph no.1. All
two-way LCD and two-way OLED remote transceivers are guaranteed to the original purchaser for
a period of one year from date of purchase. If the product proves to be defective within the first year,
the defective unit may be exchanged or repaired free of charge. All other provisions stated on this
card apply.
3. This WARRANTY will be considered void if the equipment has been misused, neglected,
improperly serviced or installed, altered, dropped or damaged by water, contrary to the Auto Page
OPERATIONS MANUAL. Or, if used with accessories not approved by Auto Page, which may
have contributed to the defect. See note below regarding product installation**.
4. The purchaser’s remedies under this WARRANTY shall be limited to the repair or replacement of
electronic components only. THE FOLLOWING IS NOT COVERED: Damages or
deterioration to cases, batteries, covers and cabinets; the cost of repairs, replacement and labor of
which shall be borne by the purchaser even if occurring during the WARRANTY period.
5. Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to
the Auto Page Service center with “proof of purchase” at the purchaser’s expense prior to such
return, a Return Authorization Number should be obtained. Auto Page will return the equipment,

17
charges prepaid. Warranty Service can be provided through the dealer where the equipment is
originally purchased.
6. Any unexpired WARRANTY shall be applicable to equipment and parts in the possession of the
original purchaser only.
7. THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
8. Auto Page shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal
injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting
directly or indirectly from the use or presence of the equipment or parts; Consequential damages of
any kind; any inability of the purchaser to use the equipment.
**IMPORTANT NOTE: Any damages to the Auto Page system resulting from an
installation performed by anyone other than a professional installation
technician authorized by a dealer of Auto Page will void the product’s Limited
Lifetime Warranty.
You must register your product online at http://www.autopageusa.com to receive any warranty service.
Please go to thecustomer servicetab and select product registration.
It is the purchaser’s responsibility to register this product for any future
warranty service.
Warning: Some batteries may contain Perchlorate
What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater,
surface water and soil. Most perchlorate manufactured in the U.S. is used as an ingredient in solid fuel for rockets and missiles.
In addition, perchlorate-based chemicals are also used in the construction of highway safety flares, fireworks, pyrotechnics,
explosives, common batteries, and automobile restraint systems. Perchlorate contamination has been reported in at least 20
states. Perchlorate greatly impacts human health by interfering with iodide uptake into the thyroid gland. In adults, the thyroid
gland helps regulate the metabolism by releasing hormones, while in children; the thyroid helps in proper development.
Perchlorate is becoming a serious threat to human health and water resources.“Perchlorate Material –Special handling may
apply.”For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

18

19
It is recommended to have a minimal digital service plan on your cell phone
Your RS-730is CI3 compatible and will open your world to the true power of two way communication.
Complete tracking and full cell phone functionality can be added to your system. For more information
please visit your local authorized Autopage dealer or go to www.autopageusa.com .

20
NOTES:
BLANKPAGE