AutomationDirect NITRA PNEUMATICS Manual

DIN CONNECTOR
SCREW
THUMB SCREW
COIL
AVS VALV
E
DIN CONNECTOR TO
COIL GASKET
DIN CONNECTOR
1. REMOVE DIN CONNECTOR SCREW,
DIN CONNECTOR, GAKSET, AND
THUMB SCREW. SLIDE COIL AWAY
FROM VALVE.
2. ASSEMBLE VALVES ONTO MANIFOLD.
USE GASKETS, SCREWS, AND SPLIT
WASHERS SUPPLIED WITH MANIFOLD.
TORQUE RETAINING SCREWS 9-18 IN-LBS.
MANIFOLD
GASKET
RETAINING
SCREW
Control Distribution Blocks
Setup Instructions
DIN CONNECTOR
SCREW
THUMB SCREW
COIL
AVS VALV
E
DIN CONNECTOR TO
COIL GASKET
DIN CONNECTOR
1. REMOVE DIN CONNECTOR SCREW,
DIN CONNECTOR, GAKSET, AND
THUMB SCREW. SLIDE COIL AWAY
FROM VALVE.
2. ASSEMBLE VALVES ONTO MANIFOLD.
USE GASKETS, SCREWS, AND SPLIT
WASHERS SUPPLIED WITH MANIFOLD.
TORQUE RETAINING SCREWS 9-18 IN-LBS.
MANIFOLD
GASKET
RETAINING
SCREW
Control Distribution Blocks
Setup Instructions

3. USING COILS FROM STEP 1, REINSTAL
L
COIL ON CONTROL DISTRIBUTION BLOCK
USING SCREW AND GASKET SUPPLIED WITH
THE DISTRIBUTION BLOC
K
4. SLIDE ASSEMBLED CONTROL
DISTRIBUTION BLOCK FROM STEP 3
TOGETHER WITH MANIFOLD ASSEMBLY
FROM STEP 2. REINSTALL THUMBSCREWS
FROM STEP 1.
ST8[+]
ST7[+]
ST6[+]
ST5[+]
ST4[+]
ST3[+]
ST2[+]
ST1[+]
ST8[+]
ST7[+]
ST6[+]
ST5[+]
ST1[+]
ST2[+]
ST3[+]
ST4[+]
COM[-]
GRD
COM[-]
GRD
AVS-31, 51
CONTROL DISTRIBUTION BLOCK
AVS-32, 33, 52, 53, 54
CONTROL DISTRIBUTION BLOCK
Control Distribution Blocks Insert Rev. 1 7-13-16
If you have any questions concerning the
installation or operation of this equipment,
or if you need additional information,
please call AutomationDirect.com Tech
Support at 770-844-4200
3. USING COILS FROM STEP 1, REINSTAL
L
COIL ON CONTROL DISTRIBUTION BLOCK
USING SCREW AND GASKET SUPPLIED WITH
THE DISTRIBUTION BLOC
K
4. SLIDE ASSEMBLED CONTROL
DISTRIBUTION BLOCK FROM STEP 3
TOGETHER WITH MANIFOLD ASSEMBLY
FROM STEP 2. REINSTALL THUMBSCREWS
FROM STEP 1.
ST8[+]
ST7[+]
ST6[+]
ST5[+]
ST4[+]
ST3[+]
ST2[+]
ST1[+]
ST8[+]
ST7[+]
ST6[+]
ST5[+]
ST1[+]
ST2[+]
ST3[+]
ST4[+]
COM[-]
GRD
COM[-]
GRD
AVS-31, 51
CONTROL DISTRIBUTION BLOCK
AVS-32, 33, 52, 53, 54
CONTROL DISTRIBUTION BLOCK
Control Distribution Blocks Insert Rev. 1 7-13-16
If you have any questions concerning the
installation or operation of this equipment,
or if you need additional information,
please call AutomationDirect.com Tech
Support at 770-844-4200