Autonics LP-A Series User manual
-|Transparent Guide|-
TCD210070AC
Color LCD Logic Panel
LP-A Series
PRODUCT MANUAL
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
Features
•
•
•
•
•
•
Cautions during Use
•
•
•
•
•
•
•
•
Safety Considerations
•
•
Warning
01. Fail-safe device must be installed when using the unit with machinery that may
cause serious injury or substantial economic loss.(e.g. nuclear power control,
medical equipment, ships, vehicles, railways, aircraft, combustion apparatus,
safety equipment, crime/disaster prevention devices, etc.)
02. Do not use the unit in the place where ammable/explosive/corrosive gas, high
humidity, direct sunlight, radiant heat, vibration, impact or salinity may be
present.
03. Use the unit within the rated specications.
04. Do not connect, repair, or inspect the unit while connected to a power source.
05. Check ‘Cautions during Power Wiring’ and ‘I/O Wiring’ before wiring.
06. In preparation for product damage, communication error, or malfunction, install
external emergency stop circuit, forward/reverse interlock circuit, limit switch,
emergency stop switch, or other protection circuit.
07. Since Lithium battery is embedded in the product, do not disassemble or burn the
unit.
08. Do not disassemble or modify the unit.
09. Please contact to us for battery replacement.
Caution
01. Use a dry cloth to clean the unit, and do not use water or organic solvent.
02. When connecting the power input, use AWG 23 cable or over, and tighten the
terminal screw with a tightening torque of 0.5 to 0.8 N.m.
03. Keep the product away from metal chip, dust, and wire residue which ow into the
unit.
04. Do not touch the front LCD screen over 2 points at the same time.
05. Do not put any heavy object on the front screen.
-|Transparent Guide|-
LP-A070-T9D□-C5□ LP-A104-T9D□-C6□
Screen size
LCD type
Resolution
Pixel pitch (W×H)
Display area
Display color
LCD view angle
(top/bottom/left/right)
Backlight
Backlight life cycle 01)
Luminance adjustment
Touch
800 × 600 cell
Sound
Input
×2
×2
2
Output
2
Approval
Unit weight (package)
Specications
Product Components
•
•
•
•
•
•
•
❶ Screen size
❷ Interface
Series ❷RS232C RS422 CAN Micro SD USB HOST USB Device Ethernet
LP-A070 61 1
1 1 1
72
LP-A104 81 1 1 1
921 1
❸ I/O conguration
❹ I/O connector type
Ordering Information
LP - A ❶- T 9 D ❷- C ❸ ❹
Power supply
Allowable voltage range
Allowable momentary
outage time
Power consumption
Inrush current
Insulated resistance )
Surge voltage
Ground
Cooling method
Noise immunity
Static discharge endurance
Dielectric strength
Vibration
Vibration (malfunction)
Shock
Shock (malfunction)
Ambient temperature
Ambient humidity
Protection structure
Material
Memory for user screen
Number of user screen 100 pages
System menu language
Font
6 × 8
8 × 8 100 × 60 100 × 75
16 × 16
Software
■atDesigner
■atLogic
■Firmware
Command
Program capacity
Program area
Processing speed
I/O control method
Computer control method
Device range
Special function
Serial interface
USB interface
±5
Ethernet interface
CAN interface
External storage
Printer
Processor
RAM
Flash
Backup memory
Backup type
Battery life cycle
Clock
Manuals
■LP-A Series user manual
■atDesigner user manual
■atLogic user manual, atLogic programming manual
■GP/LP user manual for communication
-|
Transparent Guide|-
Dimensions
•
A
C
E
D
A B C D E F
7.0 inch 185125
10.4 inch260212200
••
15 A
A B
7.0 inch 186+1
0126+1
0
10.4 inch+1
0
+1
0
Cautions during Power Wiring
•
•
•
•
•
•
Installation
100 100
100
100
100
I/O Connection Diagram
■7.0 inch
Input (source type) Output (sink type)
COM+
Xn COM+
■10.4 inch
Input (source type) Output (sink type)
COM+
Xn
COM+
Xn COM+ COM+
Indicator Program status
Color Status
Green ON
Green
Error
ON
Program Status Indicator
Interface
■Serial port (RS232C/RS422)
RS232C RS422
5
2
1
8
7
6
1
1
2
5
6
7
8
1 TXD+
2 RXD 2 RXD+
TXD
DTR
5 5
6 6
7 7
8 8
■USB port
Type Port Function
•
•
•
•
•
■Ethernet port
■CAN port
Number Color Function
1
CAN_L
2 CAN_L
None
5
■Micro SD
Other manuals for LP-A Series
3
This manual suits for next models
2
Other Autonics Control Panel manuals
