AV Access 4KEX100-H2 User manual

4KEX100-H2
4K@60 444 HDR HDBaseT Extender
User Manual

Disclaimers
The information in this manual has been carefully checked and is believed to be
accurate. AV Access Technology Limited assumes no responsibility for any
infringements of patents or other rights of third parties which may result from its
use.
AV Access Technology Limited assumes no responsibility for any inaccuracies that
may be contained in this document. AV Access Technology Limited also makes no
commitment to update or to keep current the information contained in this
document.
AV Access Technology Limited reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright
Copy, Reproduce, Distribute and/or Edit of this document or part of it as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved. Copyright ©2017 AV Access Technology Limited All rights reserved.
Trademarks Notice
All products or service names mentioned in this document may be trademarks of
the companies with which they are associated.
Contact Us
Business inquiry: service[email protected]
Technical problems: [e-mail]

Important Safety Instructions
Do not expose this device to rain, moisture, dripping or splashing. No objects
filled with liquids, such as vases, shall be placed on the device.
Do not install or place this unit in a bookcase, built-in cabinet, or in another
confined space. Ensure the unit is well ventilated.
To prevent risk of electric shock or fire hazard due to overheating, do not
obstruct the unit’s ventilation openings with newspapers, tablecloths,
curtains, or similar items.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other device (including amplifiers) that produce heat.
Do not place sources of naked flames, such as lighted candles, on the unit.
Clean this device only with dry cloth.
Unplug this device during lightning storms or when unused for long periods
of time.
Protect the power cord from being walked on or pinched, particularly at
plugs.
Only use attachments / accessories specified by the manufacturer.
Refer all servicing to qualified service personnel.

Table of Contents
www.avaccess.com 1 [e-mail]
Table of Contents
Table of Contents..................................................................................................1
Introduction..........................................................................................................2
Overview .................................................................................................................................. 2
Features .................................................................................................................................... 2
Package Contents .................................................................................................................. 2
Panel .......................................................................................................................................... 4
Front Panel...................................................................................................................... 4
Rear Panel ....................................................................................................................... 5
Installation and Application.................................................................................6
Brackets Installation.............................................................................................................. 6
Steps to install the device in a suitable location................................................. 6
IR Cable Operation ................................................................................................................ 7
Cable Type ...................................................................................................................... 7
Using the IR Emitter..................................................................................................... 7
Application ............................................................................................................................ 10
RS232 Operation ................................................................................................11
Specifications .....................................................................................................12
Trouble Shooting................................................................................................13
Warranty .............................................................................................................14

Introduction
www.avaccess.com 2 [e-mail]
Introduction
Overview
4KEX100-H2 is a slim HDBT transmitter receiver set with HDCP 2.2 compatibility. It
supports resolutions up to 4K@60Hz 4:4:4 8bit, extending 4K signal up to
70m/230ft and 1080P signal up to 100m/330ft over a Cat 5e/6 cable. It features
bi-directional PoC. It also supports bi-directional IR and RS232 pass-through.
Features
Supports resolutions up to 4K@60Hz 4:4:4 8bit and HDCP 2.2.
Supports HDR (High Dynamic Range), including HDR 10 and Dolby Vision*.
Over a Cat 6a/7 cable, HDBT transmits 4K@60Hz 4:4:4 8bit up to 100m/330ft
and 1080P up to 100m/330ft.
Over a Cat 5e/6 cable, HDBT transmits 4K@60Hz 4:4:4 8bit up to 70m/230ft
and 1080P up to 100m/330ft.
Bi-directional PoC, one power adapter at either transmitter or receiver side
can power both units.
Supports bi-directional IR and RS232 pass-through.
Slim profile, space saving and easy-to-install.
*Note: 4KEX100-H2 supports Dolby Vision only if the data rate is less than or
equal to 10.2Gbps.
Package Contents
Before you start the installation of the product, please check the package
contents:
Transmitter x 1

Introduction
www.avaccess.com 3 [e-mail]
Receiver x1
Power Adapter (DC 18V 1A) with US Pins x1
IR Emitter x1
Broadband IR Receiver (30 KHz ~ 50 KHz) x1
Phoenix Male Connector (3.5mm, 3 Pins) x 2
Mounting Brackets (with Screws) x 4
User Manual x 1

Introduction
www.avaccess.com 4 [e-mail]
Panel
Front Panel
321 4
Transmitter/Receiver
No. Name Description
1 Power LED On/Off: The device is powered on/off.
2 Status LED Blinking: The device is working properly.
Off: The device is not working properly.
3 HDCP LED
On: HDCP protected content is being transmitted.
Blinking: Non-HDCP protected cont
ent is being
transmitted.
Off: No content is being transmitted.
4 Link LED
On: The lin
k between transmitter and receiver is
normal.
Blinking/Off: Link error or no link.

Introduction
www.avaccess.com 5 [e-mail]
Rear Panel
f
e
d
c
b
a
Transmitter
65
43
2
1
Receiver
No. Name Description
a&1 DC 18V Connect to the DC 18V power adapter provided.
b HDBT Out Connect to HDBT In of the receiver via a Cat 5e/6/7
cable.
2 HDBT In Connect to HDBT Out of the transmitter via a Cat 5e/6/7
cable.
c&3 IR In Connect to the IR receiver provided.
d&4 IR Out Connect to the IR emitter provided.
e&5 RS232 For RS232 pass-through.
f HDMI In Connect to an HDMI source device.
6 HDMI Out Connect to an HDMI display device.

Installation and Application
www.avaccess.com 6 [e-mail]
Installation and Application
Brackets Installation
Note: Before installation, please ensure HDEX40-L is disconnected from the
power source.
Steps to install the device in a suitable location
1. Attach the installation bracket to the enclosure using the screws that were
provided in the package separately. The bracket height can be adjusted
up/down or bracket face up or down.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the unit.
4. Attach the brackets to the surface you want to hold the unit against using
the screws (provided by others).
5. Repeat steps 1-4 to install the receiver.

Installation and Application
www.avaccess.com 7 [e-mail]
IR Cable Operation
Cable Type
IR Emitter: Connect to the "IR Out" port of the device.
Broadband IR Receiver (30-50 KHz): connect to the "IR In" port of the device.
Using the IR Emitter
1. Insert the IR emitter plug into the “IR Out” jack located on the transmitter or
receiver.
2. Example 1: Attach the IR emitter head directly with the adhesive tape
provided near the IR receiver window (e.g. at the distance of 1cm) on the
device you want to control.
IR Receiver
IR Emitter
Controlled Device
Example 2: You can also place the IR emitter in front of the IR receiver
window on the controlled device.

Installation and Application
www.avaccess.com 8 [e-mail]
IR Receiver
IR Emitter
Controlled Device
IR Signal Emission
Example 3: When connected to control system, ensure the IR emitter is over
against the IR receiver's front side instead of its flat side (see below picture):
IR Receiver IR Emitter
Flat Side
Transmitter
(Receiver)
Control
System
IR Receiver IR Emitter
Flat Side
Transmitter
(Receiver)
Control
System
Please refer to your device's user guide to find out where the IR receiver is
on your connected device.
For example, the IR receiver for Apple TV/Amazon Fire TV/TIVO BOLT is
shown as below:
IR Receiver
Apple TV (3rd/4th generation)
Amazon Fire TV
IR Receiver

Installation and Application
www.avaccess.com 9 [e-mail]
IR Receiver
TIVO BOLT
Note: Products from AV Access do not support Bluetooth control, the introduction
above applies to device with IR control capability only. Here is a list about
different devices' control method.
No. Device Control Method
1 NVDIA 2571 Player Bluetooth/USB
2 Amazon Fire TV with UHD HDR Bluetooth
3 Amazon Fire TV IR
4 ROKU Ultra Player Bluetooth
5 Apple TV 3rd IR
6 Apple TV 4th IR
7 Apple 4K TV 5th Bluetooth
8 Xbox one S Bluetooth/USB
9 Xbox one X Bluetooth/USB
10 TIVO BOLT IR
11 NINTENDO SWITCH HAC-001
Game Console Bluetooth/USB
12 PS4 Pro Bluetooth/USB
13 Blu-ray Player IR

Installation and Application
www.avaccess.com 10 [e-mail]
Application
Blu-rayPlaye r
Display
Transmitter
Receiver
SourceRemot e
1
Connect an HDMI
source to HDMI In
of the transmitter
Connect HDBTOut of the transmitter to
HDBTIn of the receive r.
2
Connect an HDMI display to HDMI Out
of the receiver.
3
Connect the IR Emitter
provided to IR Out of the
transmitter/receiver.
4
Connect the IR Receiver
provided to IR In of the
receiver/transmitter.
5
Connect the power
adapter provided to
the t ransm itter/receive r.
5
PowerSupply

RS232 Operation
www.avaccess.com 11 [e-mail]
RS232 Operation
RS232 ports can be used for bi-directional RS232 signal pass-through between
the transmitter and receiver.
Receiver
HDBTIN
Transmitter HDBTOUT
RS232 cable
Cat X cable
RS232 cable
RS232 Device
RS232 Device
TX
RX
RS 232 Po rt Conn ected RS232Dev ice Pin s
RX
TX
GND
G

Specifications
www.avaccess.com 12 [e-mail]
Specifications
Technical
Video Signal Type HDMI with 4K@60Hz 4:4:4, HDCP 2.2, HDR, 3D
Input/Output Resolution
Support
Up to 4096x2160@60Hz, including
4K@60Hz/4K@30Hz/1080P/1080i/720P
Audio Format Supported
Fully supports audio formats in HDMI 2.0
specification
, including PCM, Dolby TrueHD,
Dolby Atmos, DTS-HD Master Audio, DTS:X
Max Data Rate 18 Gbps
General
Operating Temperature 0°C to + 45°C (32 to + 113 °F)
Storage Temperature -20 to +70°C (-4 to + 158 °F)
Humidity 20% to 90%, non-condensing
Power Consumption
(Maximum) 13W (pair, PoC)
Device Dimensions
(W x H x D)
136.40 mm × 15.2 mm × 74.2 mm/
5.37'' x 0.60'' x 2.92'' each for TX/RX (without
Mounting Brackets)
Product Weight Transmitter/Receiver: 0.24kg/0.53lb
Transmission Distance
Note: T568B straight-through Category cable is recommended.
Cable Type Range Supported Video
Cat 5e/6 100m/330ft 1080P@60Hz
70m/230ft 4K
Cat 6a/7 100m/330ft
HDMI
Input/Output: 15m/50ft 1080P@60Hz
Input/Output:10m/33ft 4K@60Hz 4:2:0
Input: 3m/10ft
Output: 5m/16ft 4K@60Hz 4:4:4

Trouble Shooting
www.avaccess.com 13 [e-mail]
Trouble Shooting
1. No Power
Ensure the power is on.
Ensure you use the power adapter provided in the package.
2. No Picture or Video Flash
Ensure all devices are on, and all cables are qualified and connected
properly. Ensure all the cables’ length are within the maximum distance
(refer to Specification table).
Ensure all the LED indicators are normal.
When connecting source to display directly, ensure them can work
properly.
Ensure the input resolution is supported by the device.
Ensure the input resolution is within 4K@30Hz when Dolby vision signal
is input.
3. Weak or Not Working IR Signal
Ensure the devices support IR control (not Bluetooth/WIFI).
Ensure you use the IR cables provided in the package, and install them
correctly according to the Application Diagram.
Pay attention to the control angle and distance.
IR Cable IR Emitter IR Receiver
Suggested Angle 0° 0°
Distance (Max) 30cm 8m
When work with the third-party device, ensure it follows the pin
definition below.
IR Receiver
Gnd
IR signal
5V
IR Emitter
5V
IR signal

Warranty
www.avaccess.com 14 [e-mail]
Warranty
Products are backed by a limited 1-year parts and labor warranty. For the
following cases AV Access Technology Limited shall charge for the service(s)
claimed for the product if the product is still remediable and the warranty card
becomes unenforceable or inapplicable.
1. The original serial number (specified by AV Access Technology Limited)
labeled on the product has been removed, erased, replaced, defaced or is
illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled
or altered by anyone that is not from an AV Access Technology Limited
authorized service partner. The defects are caused by the fact that the
product is used or handled improperly, roughly or not as instructed in the
applicable User Guide.
4. The defects are caused by any force majeure including but not limited to
accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not
covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these
cases above and to make changes to them at any time without notice.
Thank you for choosing products from AV Access.

AV Access Technology Limited
V1.0.0