Avalue Technology REN-WHLPC User manual

Part No. E2017LAM0A0R
REN-WHLPC
8th Gen Intel Embedded Box System for Renity Air
Quick Reference Guide
1st Ed –03 March 2021
Copyright Notice
Copyright 2021 Avalue Technology Inc., ALL RIGHTS RESERVED.

REN-WHLPC
2 REN-WHLPC Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "B" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

Quick Reference Guide
REN-WHLPC Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................4
1.1 Safety Precautions....................................................................................................4
1.2 Packing List...............................................................................................................4
1.3 System Specifications...............................................................................................5
1.4 System Overview......................................................................................................7
1.4.1 Top View.................................................................................................................................. 7
1.4.2 Side View................................................................................................................................. 7
1.5 System Dimensions ..................................................................................................9
2. Hardware Configuration .......................................................................................10
2.1 Installing Light Bar...................................................................................................11
2.2 Installing Power Cord..............................................................................................13
2.3 Installing Touch Monitor (Factory Option)...............................................................14

REN-WHLPC
4 REN-WHLPC Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not make
connections while the power is on. Sensitive electronic
components can be damaged by sudden power surges.
Only experienced electronics personnel should open the PC
chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions.
Français:
Attention!
Débranchez le câble d'alimentation de votre châssis chaque
fois que vous travaillez avec le matériel. Ne faites pas de
connexion lorsque le système est allumé. Les composants
électroniques sensibles peuvent être endommagés par les
surtensions soudaines. Seule les personnels expérimentés
de l'électronique peuvent ouvrir le châssis du PC.
Précaution!
Il faut toujours mettre à la masse pour éliminer l’électricité
statique avant de toucher la carte CPU. Les appareils
électroniques modernes sont très sensibles aux électricité
statique. Pour des raisons de sécurité, utilisez un bracelet
électrostatique. Placez tous les composants électroniques
sur une surface antistatique ou dans un sac antistatique
quand ils ne sont pas dans le châssis.
Risque d'explosion si la batterie est remplacée par un type
incorrect. Jetez les piles usagées selon les instructions
1.2 Packing List
1 x REN-WHLPC Intel® Core® Soc Processor Box PC
1 set of Screw kit/Power Cord/Light Bar/Printer Bracket
2 sets of HDMI cable, USB cable and DC-in plug pre-install in BOX PC

Quick Reference Guide
REN-WHLPC Quick Reference Guide
5
1.3 System Specifications
System
Mother Board
ECM-WHL SBC
CPU
Intel® Core™ i7-8665U Processor (8M Cache, up to 4.80 GHz)
CPU Cooler (Type)
CPU Cooler
Memory
8GB DDR4 2400Mhz
Power Supply
150W/12V
Audio
Realtek ALC892/ALC888S
Camera
FHD 5MP Auto-Focus Web Camera
Operating System
Win10
Expansion Card
1-M.2 Key-B (2242/3042), 1-M.2 Key-E
Storage
Solid State Drive
M.2 SSD
External I/O
Serial Port
4-RS232
USB Port
4-USB3.1 (Gen2,10Gbps), 5-USB2.0
HDMI Port
2-HDMI
Audio Port
1-Mic-in, 1-Line-out
LAN Port
2-RJ45
Power Switch
1-Power on/off button
Light Power Switch
1-Light on/off button
Power Connector
Type
AC Inlet
LED Light Bar
CCT
5700K (±10%)
CRI
>70
Beam Angle
120。
Luminous Flux
500 (lm)
Mechanical
Power Type
100~240 VAC ± 10%, 50~60Hz
Dimension
285*368*280mm (11.22*14.49*11.02)
Weight
4.5kg
Color
White
OS Support
Win10
Note: Specifications are subject to change without notice.

REN-WHLPC
6 REN-WHLPC Quick Reference Guide
Suggested Specification for Factory Option items
1.) Touch monitor：Please note the specification is must.
Screen Diagonal
18.5 Inch
15.6 Inch
Resolution
1920x1080 (FHD)
1366x768 (HD)
Contrast Ratio
1000:1
500:1
Touch Type
PCAP
PCAP
Brightness
500nits Above
300nits Above
Display Input
HDMI
HDMI
Power Input
12VDC
12VDC
Weight (Net)
2.94KG (≦3KG)
3.3KG (≦3.5KG)
2.) Touch monitor ARM：
Providing 2 mounting space in coordination with VESA standard:75mm x
75mm and 100mm x100mm.
Bearing weight should more than 4KG.
The angle of view should be designed adjustable for clear vision.
Drawing Demonstration:

Quick Reference Guide
REN-WHLPC Quick Reference Guide
7
1.4 System Overview
1.4.1 Top View
1.4.2 Side View
Connectors
Label
Function
Note
Light Bar Power Switch
Light on/off switch
AC Inlet
For AC power cord

REN-WHLPC
8 REN-WHLPC Quick Reference Guide
Power Button
Power on/off button
USB 2.0
USB 2.0 connector

Quick Reference Guide
REN-WHLPC Quick Reference Guide
9
1.5 System Dimensions
(Unit: mm)

REN-WHLPC
10 REN-WHLPC Quick Reference Guide
2.Hardware
Configuration
For advanced information, please refer to:
1- ECM-WHL User’s Manual
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

Quick Reference Guide
REN-WHLPC Quick Reference Guide
11
2.1 Installing Light Bar
Step 1: Take out standard accessories from packaging box.
Step 2: Remove tape from cable.

REN-WHLPC
12 REN-WHLPC Quick Reference Guide
Step 3: Connect two pairs of cables on the light bar and the system. Stow the cable in the
telescopic tube and assemble the light bar on the system with screws.

Quick Reference Guide
REN-WHLPC Quick Reference Guide
13
2.2 Installing Power Cord
Connect the power cord connector to the internal AC Intel through the hole at the
bottom of the system.

REN-WHLPC
14 REN-WHLPC Quick Reference Guide
2.3 Installing Touch Monitor (Factory Option)
Please note that the touch monitor must be configured according to the
instructions.
Step1. Assemble 18.5” touch monitor with 18.5” touch monitor.

Quick Reference Guide
REN-WHLPC Quick Reference Guide
15
Step2. Disassembling the ARM set and assemble the VESA bracket on the Touch monitor.
Step3. Assembling the ARM bracket with 15.6” touch monitor.

REN-WHLPC
16 REN-WHLPC Quick Reference Guide
Step 4. Connecting cables (HDMI/USB/Power) of system with Touch monitors.