Avalue Technology EMS-TGL Series User manual

Part No. E2017AAO0A0R
EMS-TGL
Intel 11th Gen Intel®Core™ Processor i7/i5/i3
Fanless Rugged Embedded System
Quick Reference Guide
1st Ed –22 January 2021
Copyright Notice
Copyright 2021 Avalue Technology Inc., ALL RIGHTS RESERVED.
Texim Europe
www.texim-europe.com


EMS-TGL
2 EMS-TGL Series Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
3
Content
1. Getting Started............................................................................................................7
1.1 Safety Precautions ................................................................................................7
1.2 Packing List...........................................................................................................7
1.3 System Specifications ...........................................................................................8
1.4 System Overview.................................................................................................12
1.4.1 Front View.................................................................................................................................. 12
1.4.2 Rear View................................................................................................................................... 12
1.5 System Dimensions.............................................................................................19
1.5.1 EMS-TGL Front & Top view....................................................................................................... 19
1.5.2 EMS-TGL-6 COM/EMS-TGL-4 COM Isolation Front & Top view.............................................. 20
1.5.3 EMS-TGL-6 LAN/EMS-TGL-PSE Front & Top view.................................................................. 21
1.5.4 EMS-TGL-HDMI Front & Top view ............................................................................................ 22
1.5.5 EMS-TGL-DVI Front & Top view................................................................................................ 23
1.5.6 EMS-TGL-USB Front & Top view.............................................................................................. 24
2. Hardware Configuration...........................................................................................25
2.1 EMS-TGL connector mapping.............................................................................26
2.1.1 Serial port connector 1/2 (COM1/2)............................................................................................... 26
2.1.2 Serial port 3/4/5/6 connector (COM3/4/5/6)............................................................................... 27
2.1.3 General purpose I/O connector (GPIO)..................................................................................... 27
2.1.4 DC power-in connector (DC-in).................................................................................................. 27
2.2 EBM-TGLS, AUX-M01, AUX-M02, AUX-M04, AUX-M07, EBM-BYTS DB-A,
EBM-CDVS DB-A and EBM-BYTS DB-E Overviews .....................................................28
2.2.1 EBM-TGLS................................................................................................................................. 28
2.2.2 AUX-M01.................................................................................................................................... 29
2.2.3 AUX-M02.................................................................................................................................... 29
2.2.4 AUX-M04.................................................................................................................................... 30
2.2.5 AUX-M07.................................................................................................................................... 30
2.2.6 EBM-BYTS DB-A....................................................................................................................... 31
2.2.7 EBM-CDVS DB-A ...................................................................................................................... 31
2.2.8 EBM-BYTS DB-E....................................................................................................................... 32
2.3 EBM-TGLS Jumper & Connector list...................................................................33
2.4 EBM-TGLS Jumpers & Connectors settings .......................................................35
2.4.1 Multi-function select (SW1)........................................................................................................ 35
2.4.2 Serial port 1/2 pin 9 signal select (JRI1/2)................................................................................. 35
2.4.3 Serial port 1/2 RS-232/422/485 mode select (JCOM_SEL1/2) ................................................. 36
Texim Europe
www.texim-europe.com

EMS-TGL
4 EMS-TGL Series Quick Reference Guide
2.4.4 Clear CMOS (JBAT1) ................................................................................................................ 36
2.4.5 LPC port connector (JLPC1)...................................................................................................... 37
2.4.6 SPI connector (JSPI1) ............................................................................................................... 37
2.4.7 Front Panel Connector (JFP1)................................................................................................... 38
2.4.8 DC Output connector (DCOUT1)............................................................................................... 38
2.4.9 DC Input connector (JVIN1)....................................................................................................... 39
2.4.10 EC Debug connector (JEC_ROM1)....................................................................................... 39
2.4.11 On-board header for USB2.0 (JUSB1).................................................................................. 40
2.4.12 Power on/off connector (PWRBTN1) .................................................................................... 40
2.5 AUX-M01, AUX-M02, AUX-M04, AUX-M07, EBM-BYTS DB-A, EBM-CDVS DB-A
and EBM-BYTS DB-E Jumper & Connector list.............................................................41
2.6 AUX-M01 Jumpers & Connectors settings ..........................................................43
2.6.1 COM 3/4/5/6 pin 9 signal select (JRI3/4/5/6)............................................................................. 43
2.6.2 USB connector (USB3).............................................................................................................. 43
2.6.3 USB connector (JUSB3)............................................................................................................ 44
2.6.4 SMBUS of TCA9555 address setting (PJP1) ............................................................................ 44
2.7 AUX-M02 Connectors settings ............................................................................45
2.7.1 LAN ACT/LNK/SPD LED (JLANLED)........................................................................................ 45
2.7.2 Normal/Bypass mode LED (JLANMODE) ................................................................................. 45
2.8 AUX-M04 Jumpers & Connectors settings ..........................................................46
2.8.1 Operating Modes select (ZJP1)................................................................................................. 46
2.8.2 Power connector (ZPWR1)........................................................................................................ 46
2.8.3 LAN ACT/LNK/SPD LED (Z_JLANLED).................................................................................... 47
2.9 AUX-M07 Connector settings..............................................................................48
2.9.1 SMBUS of TCA9555 address setting (SJP2) ............................................................................ 48
2.10 EBM-BYTS DB-A Jumpers & Connectors settings..............................................49
2.10.1 COM 3/4 pin 9 signal select (OJRI3/4).................................................................................. 49
2.10.2 Serial port 1/ 2 –RS485 mode select (OJP485) ................................................................... 49
2.10.3 SMBUS of TCA9555 address setting (OJP1)........................................................................ 50
2.11 EBM-CDVS DB-A Connector settings.................................................................50
2.11.1 Front Panel Connector 1 (CN1)............................................................................................. 50
2.12 Installing Hard Disk & Memory (EMS-TGL).........................................................51
3.BIOS Setup....................................................................................................................52
3.1 Introduction..........................................................................................................53
3.2 Starting Setup......................................................................................................53
3.3 Using Setup.........................................................................................................54
3.4 Getting Help.........................................................................................................55
3.5 In Case of Problems............................................................................................55
3.6 BIOS setup..........................................................................................................56
3.6.1 Main Menu ................................................................................................................................. 56
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
5
3.6.1.1 System Language ............................................................................................................. 57
3.6.1.2 System Date...................................................................................................................... 57
3.6.1.3 System Time ..................................................................................................................... 57
3.6.2 Advanced Menu......................................................................................................................... 57
3.6.2.1 CPU Configuration ............................................................................................................ 58
3.6.2.2 Power & Performance....................................................................................................... 59
3.6.2.2.1 CPU-Power Management Control..................................................................................... 59
3.6.2.3 PCH-FW Configuration...................................................................................................... 60
3.6.2.3.1 Firmware Update Configuration ........................................................................................ 60
3.6.2.4 Trusted Computing............................................................................................................ 61
3.6.2.5 APCI Settings.................................................................................................................... 61
3.6.2.6 IT8528 Super IO Configuration ......................................................................................... 62
3.6.2.6.1 Serial Port 1 Configuration................................................................................................ 63
3.6.2.6.2 Serial Port 2 Configuration................................................................................................ 63
3.6.2.6.3 Serial Port 3 Configuration................................................................................................ 64
3.6.2.6.4 Serial Port 4 Configuration................................................................................................ 65
3.6.2.6.5 Serial Port 5 Configuration................................................................................................ 66
3.6.2.6.6 Serial Port 6 Configuration................................................................................................ 67
3.6.2.7 H/W Monitor ...................................................................................................................... 68
3.6.2.8 S5 RTC Wake Settings ..................................................................................................... 68
3.6.2.9 Serial Port Console Redirection........................................................................................ 69
3.6.2.9.1 Legacy Console Redirection Settings ............................................................................... 69
3.6.2.10 USB Configuration............................................................................................................. 70
3.6.2.11 Network Stack Configuration............................................................................................. 71
3.6.2.12 NVMe Configuration.......................................................................................................... 71
3.6.3 Chipset..................................................................................................................................... 72
3.6.3.1 System Agent (SA) Configuration ..................................................................................... 72
3.6.3.1.1 Memory Configuration....................................................................................................... 73
3.6.3.1.2 Graphics Configuration...................................................................................................... 73
3.6.3.2 PCH-IO Configuration ....................................................................................................... 74
3.6.3.2.1 PCI Express Configuration................................................................................................ 74
3.6.3.2.1.1 PCI Express Root Port 5 (IET)................................................................................. 75
3.6.3.2.1.2 PCI Express Root Port 6 (IET)................................................................................. 76
3.6.3.2.1.3 PCI Express Root Port 8 (I225)............................................................................... 77
3.6.3.2.1.4 PCI Express Root Port 9 (IET)................................................................................. 78
3.6.3.2.1.5 PCI Express Root Port 10 (IET)............................................................................... 79
3.6.3.2.1.6 PCI Express Root Port 11 (M.2 KeyB)..................................................................... 80
3.6.3.2.1.7 PCI Express Root Port 12 (M.2 KeyE)..................................................................... 81
3.6.3.2.2 SATA And RST Configuration........................................................................................... 82
3.6.3.2.3 HD Audio Configuration .................................................................................................... 82
Texim Europe
www.texim-europe.com

EMS-TGL
6 EMS-TGL Series Quick Reference Guide
3.6.3.2 Board & Panel Configuration............................................................................................. 83
3.6.4 Security .................................................................................................................................... 84
3.6.4.1 Secure Boot menu............................................................................................................. 85
3.6.5 Boot.......................................................................................................................................... 86
3.6.6 Save and exit ........................................................................................................................... 87
3.6.6.1 Save Changes and Reset ................................................................................................. 87
3.6.6.2 Discard Changes and Reset ............................................................................................. 87
3.6.6.3 Restore Defaults................................................................................................................ 88
3.6.6.4 Launch EFI Shell from filesystem device.......................................................................... 88
4. Drivers Installation.......................................................................................................89
4.1 Install Chipset Driver ...........................................................................................90
4.2 Install ME Driver..................................................................................................91
4.3 Install VGA Driver................................................................................................92
4.4 Install Audio Driver (For Realtek ALC892)...........................................................93
4.5 Install SerialIO Driver...........................................................................................94
4.6 Install Ethernet Driver..........................................................................................95
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
7
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x EMS-TGL 11th Gen Intel®Core™ Processor i7/i5/i3 Fanless
Rugged Embedded System
1 x Terminal block to lockable DC Jack cable
1 x DP to VGA Converter
1 x Screw driver for chassis
1 x Wire tie for HDMI
1 x 60W adapter (optional)
1 x Power cord (optional)
1 x Thermal pad for M.2 NVMe SSD
Texim Europe
www.texim-europe.com

EMS-TGL
8 EMS-TGL Series Quick Reference Guide
1.3 System Specifications
System
Board
EBM-TGLS (EMS-TGL)
With IET Extension Board
EBM-TGLS +AUX-M01 (EMS-TGL-6 COM)
EBM-TGLS +AUX-M02 (EMS-TGL-6 LAN)
EBM-TGLS +AUX-M04 (EMS-TGL-PSE)
EBM-TGLS +AUX-M07 (EMS-TGL-4 COM Isolation)
EBM-TGLS +EBM-BYTS DB-A (EMS-TGL-HDMI)
EBM-TGLS +EBM-CDVS DB-A (EMS-TGL-DVI)
EBM-TGLS +EBM-BYTS DB-E (EMS-TGL-USB)
CPU
Intel® Core™ i7- 1185GRE (15W, 12M Cache, up to 2.80 GHz), WT
Intel® Core™ i5- 1145GRE (15W, 8M Cache, up to 2.60 GHz), WT
Intel® Core™ i3- 1115GRE (15W, 6M Cache, up to 3.00 GHz), WT
Intel® Core™ i7- 1185G7E (15W, 12M Cache, up to 2.80 GHz), ST
Intel® Core™ i5- 1145G7E (15W, 8M Cache, up to 2.60 GHz), ST
Intel® Core™ i3- 1115G4E (15W, 6M Cache, up to 3.00 GHz), ST
BIOS
AMI uEFI BIOS 256 Mbit SPI Flash ROM
System Chipset
SoC
I/O Chip
EC ITE IT8528E
System Memory
2 x 260-pin SODIMM socket Max. up to 64GB DDR4 3200 MT/s
Watchdog Timer
H/W Reset, 1sec. ~ 65535sec.
Battery
Horizontal battery socket
Supports wide operating temperature (adjusting according to test result)
Supports no RTC battery mode
H/W Status
Monitor
CPU & system temperature monitoring and Voltages monitoring
Expansion
Expansion
1 x M.2 Key-B 2242/3042/3052 support SATA3/ PCIeIII x1/ USB3.1 and
SIM slot1
1 x M.2 Key-E 2230 for Wi-Fi & BT Module(CNVi)
1 x IET interface (1 x DDI, 2x PCIeIII x2, 3 x USB2.0, 1 x Line-Out(R/L), 1
x SMBus, LPC)
Storage
Combination
1 x M.2 Key-M 2242/2280, support PCIe Gen. IV x 4 (NVMe SSD)
1 x M.2 Key-B 2242, support SATA (share with expansion slot)
Edge I/O
USB Port
2 x USB 3.1 Gen.2 (10Gbp/s)
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
9
2 x USB 3.1 Gen.1 (5Gbp/s) via Hub, (w/ USB 2.0)
Button
1 x Push Button for Power on/off
1 x Push Button for Reset
1 x 2-Pin Terminal Block for wire-control power on/off
SIM slot
1 x internal SIM slot
LED
1 x Power LED (Blue)
1 x Storage LED (Yellow)- M.2 B-key SATA/ M.2 M-key PCIe Storage
1 x LTE LED (Green)- M.2 B-key PCIe/USB3
1 x Wifi LED (Green)- M.2 E key
Serial Port
2 x COM RS232/422/485 (select via BIOS, auto flow control via HW)
LAN
2 x RJ45
Audio
1 x Mic-In, 1 x Line-Out
GPIO
1 x 8-bit GPIO (DB9)
Others
8 x Antenna with dust cover (6 x LTE+GPS / 2 x Wifi)
Display
Chipset
Intel® Iris® Xe Graphics
(i7-1185GRE/i5-1145GRE/i7-1185G7E/i5-1145G7E)
Intel® UHD Graphics for 11th Gen Intel® Processors
(i3-1115GRE/i3-1115G4E)
Display Interface
1 x DP 1.4 (eDP to DP)
(DP to VGA converter is the standard accessory, and optional DP to DVI,
DP to HDMI converters)
1 x HDMI 2.0b (DDI)
Resolution
DP++ 1.4: 4096x2304 @ 60Hz
HDMI 2.0b: Max. resolution 4096x2304 @ 60Hz
Multiple Display
2 displays
Ethernet
Chipset
1 x Intel I225-LM, w/ TSN (need additional SW support)
1 x Intel I219-LM, vPro support (only with i5 and i7 CPU)
Ethernet Interface
1 x 10/100/1000/2.5G Base-Tx GbE compatible
1 x 10/100/1000Base-Tx GbE compatible.
LED Signal
2.5G LAN Port (i225-LM)
ACT/LINK
SPEED
LED
Definition
LED
Definition
Light Off
No Link
Solid Orange
2.5G
Solid Yellow
Connection
Solid Green
1G/100M
Flashing
Activity
Light Off
10M
Texim Europe
www.texim-europe.com

EMS-TGL
10 EMS-TGL Series Quick Reference Guide
1G LAN Port (i219-LM)
ACT/LINK
SPEED
LED
Definition
LED
Definition
Light Off
No Link
Solid Orange
1G
Solid Yellow
Connection
Solid Green
100M
Flashing
Activity
Light Off
10M
Audio
Chipset
Realtek ALC888S HD codec
Audio Interface
Mic-In, Line-Out
Mechanical & Environmental
Power Connector
3-Pin Terminal Block (V+. V-, GND)
Power Requirement
DC in typical 12/24V (+9V ~ +32V), wide voltage single power input
TVS component for surge protection
Reverse current/voltage protection (Max. Currency: 13A)
Power Type
AT/ATX (ATX is default setting)
ACPI
Single power ATX Support S0,S3, S4, S5
ACPI 5.0 Compliant
Dimension (W x L x
H)
240mm x 150mm x 48 mm (Standard)
240mm x 150mm x 69 mm (w/ IET module)
Weight
2.1 kg (System) _ w/o IET module
2.9 kg (w_Package) _ w/o IET module
Color
Avalue Box PC family design
Mounting Kit
Wall mount kit (standard)
DIN RAIL (optional)
Reliability
Vibration Test
(operation)
1. PSD: 0.0505G²/Hz , 5 Grms
2. Operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 minutes per each axis
6. IEC 60068-2-64 Test:Fh
7. Storage : SSD
Vibration Test
(non-operation)
1. Test Acceleration : 2G
2. Test frequency : 5~500 Hz
3. Sweep：1 Oct/ per one minute. (logarithmic)
4. Test Axis : X,Y and Z axisTest time :30 min. each axis
5. System condition : Non-Operating mode
6. Reference IEC 60068-2-6 Testing procedures
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
11
Package vibration
test
1. PSD: 0.026G²/Hz , 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 min. per each axis
6. IEC 60068-2-64 Test:Fh
Shock
1. Wave form：Half Sine wave
2. Acceleration Rate：55g for operation mode
3. Duration Time：11ms
4. No. of Shock：+/- XYZ axis 18 times
5. Operation mode
6. Reference IEC 60068-2-27 Testing procedures Test Eb : Shock Test
Package Drop Test
1. One corner , three edges, six faces
2. ISTA 2A, IEC-60068-2-32 Test:Ed
IP
IP 50
Operating
Temperature
-40°C ~ 70°C (w/SSD) ambient w/ air flow, WT sku
0°C ~ 70°C (w/SSD) ambient w/ air flow, ST sku
Operating Humidity
40°C @ 95% Relative Humidity, Non-condensing
Storage
Temperature
-40°C ~ 75°C (-40°F ~ 167°F)
Certification
CE, FCC Class B
OS Supported
Win 10 64bit / Linux
Compliant with following Flexible IET Expansion Modules
AUX-M02
4 x LAN supports 2-Pair LAN bypass + 2 x USB 2.0
AUX-M04
4 x LAN supports PoE 802.3af + 2 x USB 2.0
EBM-CDVS DB-A
1 x DVI-D + 2 x USB 2.0
EBM-BYTS DB-E
4 x USB 3.0 + 3 x USB 2.0
EBM-BYTS DB-A
1 x HDMI, 2 x RJ45, 2 x RS-232/422/485 (BIOS), 2 x USB 2.0
AUX-M01
4 x RS-232/422/485(BIOS), 2 x USB 2.0
AUX-M07
4 x RS-232/422/485(BIOS) w/ 2.5KV isolation, 2 x USB 2.0
Note: Specifications are subject to change without notice.
Texim Europe
www.texim-europe.com

EMS-TGL
12 EMS-TGL Series Quick Reference Guide
1.4 System Overview
1.4.1 Front View EMS-TGL
EMS-TGL-6 COM/EMS-TGL-6 LAN/EMS-TGL-PSE/EMS-TGL-4 COM Isolation
/EMS-TGL-HDMI/EMS-TGL-DVI/EMS-TGL-USB
1.4.2 Rear View EMS-TGL
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
13
EMS-TGL-6 COM/EMS-TGL-4 COM Isolation
EMS-TGL-6 LAN/EMS-TGL-PSE
EMS-TGL-HDMI
Texim Europe
www.texim-europe.com

EMS-TGL
14 EMS-TGL Series Quick Reference Guide
EMS-TGL-DVI
EMS-TGL-USB
EMS-TGL
Connectors
Label
Function
Note
Power
System power indicator
Reset
Reset button
HDD
HDD indicator
WWAN
WWAN Indicator
WLAN
WLAN Indicator
COM1/2
Serial port connector 1/2
GPIO
General purpose I/O connector
EX PWR
Power on button
Mic-in
Mic-in audio jack
Line-out
Line-out jack
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
15
HDMI
HDMI connector
DP
DP connector
USB 3.1 Gen.1
2 x USB 3.1 Gen.1 connector
USB 3.1 Gen.2
2 x USB 3.1 Gen.2 connector
LAN1/2
RJ-45 Ethernet 1/2
DC-in
DC power-in connector
EMS-TGL-6 COM/EMS-TGL-4 COM Isolation
Connectors
Label
Function
Note
Power
System power indicator
Reset
Reset button
HDD
HDD indicator
WWAN
WWAN Indicator
WLAN
WLAN Indicator
COM1/2/3/4/5/6
Serial port connector 1/2/3/4/5/6
GPIO
General purpose I/O connector
EX PWR
Power on button
Mic-in
Mic-in audio jack
Line-out
Line-out jack
HDMI
HDMI connector
DP
DP connector
USB 3.1 Gen.1
2 x USB 3.1 Gen.1 connector
USB 3.1 Gen.2
2 x USB 3.1 Gen.2 connector
USB 2.0
2 x USB 2.0 connector
LAN1/2
RJ-45 Ethernet 1/2
DC-in
DC power-in connector
EMS-TGL-6 LAN/EMS-TGL-PSE
Connectors
Label
Function
Note
Power
System power indicator
Reset
Reset button
HDD
HDD indicator
WWAN
WWAN Indicator
WLAN
WLAN Indicator
Texim Europe
www.texim-europe.com

EMS-TGL
16 EMS-TGL Series Quick Reference Guide
COM1/2
Serial port connector 1/2
GPIO
General purpose I/O connector
EX PWR
Power on button
Mic-in
Mic-in audio jack
Line-out
Line-out jack
HDMI
HDMI connector
DP
DP connector
USB 3.1 Gen.1
2 x USB 3.1 Gen.1 connector
USB 3.1 Gen.2
2 x USB 3.1 Gen.2 connector
USB 2.0
2 x USB 2.0 connector
LAN1/2/3/4/5/6
RJ-45 Ethernet 1/2/3/4/5/6
DC-in
DC power-in connector
EMS-TGL-HDMI
Connectors
Label
Function
Note
Power
System power indicator
Reset
Reset button
HDD
HDD indicator
WWAN
WWAN Indicator
WLAN
WLAN Indicator
COM1/2/3/4
Serial port connector 1/2/3/4
GPIO
General purpose I/O connector
EX PWR
Power on button
Mic-in
Mic-in audio jack
Line-out
Line-out jack
HDMI
2 x HDMI connector
DP
DP connector
USB 3.1 Gen.1
2 x USB 3.1 Gen.1 connector
USB 3.1 Gen.2
2 x USB 3.1 Gen.2 connector
USB 2.0
2 x USB 2.0 connector
LAN1/2/3/4
RJ-45 Ethernet 1/2/3/4
DC-in
DC power-in connector
EMS-TGL-DVI
Connectors
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
17
Label
Function
Note
Power
System power indicator
Reset
Reset button
HDD
HDD indicator
WWAN
WWAN Indicator
WLAN
WLAN Indicator
COM1/2
Serial port connector 1/2
GPIO
General purpose I/O connector
EX PWR
Power on button
Mic-in
Mic-in audio jack
Line-out
Line-out jack
HDMI
2 x HDMI connector
DP
DP connector
USB 3.1 Gen.1
2 x USB 3.1 Gen.1 connector
USB 3.1 Gen.2
2 x USB 3.1 Gen.2 connector
USB 2.0
2 x USB 2.0 connector
LAN1/2
RJ-45 Ethernet 1/2
DVI
DVI connector
DC-in
DC power-in connector
EMS-TGL-USB
Connectors
Label
Function
Note
Power
System power indicator
Reset
Reset button
HDD
HDD indicator
WWAN
WWAN Indicator
WLAN
WLAN Indicator
COM1/2
Serial port connector 1/2
GPIO
General purpose I/O connector
EX PWR
Power on button
Mic-in
Mic-in audio jack
Line-out
Line-out jack
HDMI
2 x HDMI connector
DP
DP connector
USB 3.1 Gen.1
6 x USB 3.1 Gen.1 connector
Texim Europe
www.texim-europe.com

EMS-TGL
18 EMS-TGL Series Quick Reference Guide
USB 3.1 Gen.2
2 x USB 3.1 Gen.2 connector
USB 2.0
3 x USB 2.0 connector
LAN1/2
RJ-45 Ethernet 1/2
DVI
DVI connector
DC-in
DC power-in connector
Texim Europe
www.texim-europe.com

Quick Reference Guide
EMS-TGL Series Quick Reference Guide
19
1.5 System Dimensions
1.5.1 EMS-TGL Front & Top view
(Unit: mm)
Texim Europe
www.texim-europe.com

EMS-TGL
20 EMS-TGL Series Quick Reference Guide
1.5.2 EMS-TGL-6 COM/EMS-TGL-4 COM Isolation Front & Top view
(Unit: mm)
Texim Europe
www.texim-europe.com