Avante FUROMCTBAA4BG User manual

Office Massage Chair Assembly Guide
Parts List
No.
Image
Name
Qty.
A
Wheel
5
B
Base
1
C
Gas Strut
1
* D
Strut Cover
1
E
Height
Adjustment
Lever
1
F
M6x20mm
Screw
4
G
M6x25mm
Screw
8
H
Arm Rest
2
I
Seat Base
1
J
Back Support
1
K
Cap
8
1: Attach wheels (A) to frame (B), then
insert gas strut (C) into base. Some non-
chrome models may include a strut cover
(D) –if included, place it over the strut.
2: Attach height adjustment lever (E) to
the seat base (I) using 4 M6x20mm
screws (F). The end of the lever should
face toward the front of the chair.
3: Attach each arm rest (H) to the
seat base (I) using 2 M6x25mm
screws (G), then attach the back
support (J) to each arm rest using
2 M6x25mm screws (G).
4: Push the seat assembly firmly on to the
top of the gas strut.
5: Insert a cap (K) into each arm rest
screw hole.
The chair is now ready for use.
* Applies to some non-chrome finish models.
Design and appearance may vary to those shown in this guide.

Massage Operation
The massage functions are available when the massage control unit is
properly connected and power is available.
Set-Up
1. Connect the chair back and seat cushion cables together –"white"
connectors (A).
2. Connect the massage control unit cable to the chair cable –large "DIN"
style connectors (B).
3. Connect the power supply output cable to the chair power cable –"black"
connectors (C).
4. Plug the power supply into a 240VAC mains socket and switch power on
(D).
Using the Massage Control
Once the massage control unit is connected and mains power is available,
press POWER on the massage control unit to activate massage operation.
Use the massage controls as desired. When finished, press POWER again to
deactivate massage operation.
When a massage function is active, the lamp next to the function illuminates.
Massaging is timer controlled to prevent it being left on accidentally.
Control
Function
POWER
Press to activate / deactivate massage operation.
INTENSITY
Press to toggle between "HIGH" and "LOW" settings. When "HIGH",
the strength of the massaging functions is increased.
MODE
Press to switch between various massage vibration patterns. The
pattern will apply to all currently selected massage areas:
PULSE –Vibration applies in a gradual build-up then fade out
fashion.
PRESS –Vibration applies in a gradual build-up then stop fashion.
WAVE –Vibration applies in a stepped fashion between selected
massage areas. For example, if all areas are selected, neck, then
back, then lumbar etc.
AUTO –Vibration applies in a continuous fashion.
NORMAL –Vibration applies in a variable fashion.
NECK
Press to activate / deactivate the upper back area massaging.
BACK
Press to activate / deactivate the central back area massaging.
LUMBAR
Press to activate / deactivate the lower back area massaging.
THIGH
Press to activate / deactivate the upper leg area massaging.
TIMER
Press to switch between various massage timers. All massage
functions stop automatically when the timer finishes. Press to switch
between 15 minute, 30 minute and 60 minute timers.
B
A
C
D

Some experts believe that the incorrect or prolonged use of almost any product may
cause serious injury or death. To help reduce your risk of serious injury or death, refer
to the information below. For more information, see www.datastreamserver.com/safety
Consult all documentation, packaging and product
labelling before use. Note that some products feature
documentation available online. It is recommended to
print and retain the documentation.
Before each use, check the product for loose/broken/
damaged/missing parts, wear or leaks (if applicable).
Never use a product with
loose/broken/damaged/missing parts, wear or leaks.
Products must be inspected and serviced (if
applicable) by a qualified technician every 6 months.
This is based on average residential use by persons of
average size and strength, and on a property of
average metropolitan size. Use beyond these
recommendations may require more frequent
inspections/servicing.
Ensure that all users of the product have completed a
suitable industry recognised training course before
being allowed access to the product.
If this product has been purchased in error when
considering the information presented here, contact
the retailer directly for details of their returns policy, if
required.
The product has been supplied by a general
merchandise retailer that may not be familiar with your
specific application or description of application. Be
sure to attain third-party approval from a qualified
specialist for your application before use, regardless of
any assurances from the retailer or its representatives.
This product is not intended for use where fail-safe
operation is required. As with any product (for
example, automobile, computer, toaster), there is the
possibility of technical issues that may require the
repair or replacement of parts, or the product itself. If
the possibility of such failure and the associated time it
may take to rectify could in any way inconvenience the
user, business or employee, or financially affect the
user, business or employee, then the product is not
suitable for your requirements. This product is not
intended for use where incorrect operation or a failure
of any kind, including but not limited to, a condition
requiring product return, replacement, parts
replacement or service by a technician may cause
financial loss, loss of employee time or an
inconvenience requiring compensation.