Avantgarde LWC-12B User manual

AVANTGARDE
THERMOELECTIRC
WINE COOLER
Model No: LWC-12B
Operation Manual

1
Index
. General Safety Precautions………….......................1
. Technical Data……………………….........................3
. Illustrated Structure…………………….....................4
. Electric Principle Diagram…………………………...4
. Operation …………………………………………….. 5
. Particular Precautions…………………………...……6
. Maintenance……………………………………….…..6
. Troubleshooting………………………………..………7

2
.GENERAL SAFETY PRECAUTIONS
● After removing the refrigerator from the package, make
sure it is in good condition. In case of doubt, do not use
it and contact an authorized service center.
● Plastic bags, nails, etc. should be kept out of reach of
children. Read the operation manual carefully and check
that the rating data on the rating nameplate corresponds
to your power supply.
● This refrigerator can only be used in the use of which it
was designed. The manufacturer will not respond for
any damage due to improper use or repairs made by
unqualified personnel.
● Before cleaning the refrigerator, make sure it is
unplugged. Never clean the unit with an acid preparation,
medical, dilution, gasoline, oil or any other kind of
chemical substance that could damage the refrigerator.
● Repair should only be made by authorized service
centers.
. Caution
1. To reduce the risk of fire, replace only with same type
fuse.
2. Free standing installation only
3. Do not use extension cords.

3
4. Danger: Risk of child entrapment. Before throwing
away your old refrigerator, you must note: a Take off
the door; b Leave the shelves in place, so that children
may not easily climb inside.
.TECHNICAL DATA
Type LWC-12B
Volume (liter) 35L
Case Iron
Material Door Glass
Unit Dimension
(W×H×D)(mm) 260X650X495
Packaging Dimension
(W×H×D)(mm) 300X660X535
Net Weight (Kg) 12.4
Gross Weight (Kg) 13.4
Power Consumption
(KW·h/24h) 0.8
Fitting ambient temperature
range of working
＜30º
Temperature Range 11º—18º
Rated Voltage AC110V
Rated Frequency 60HZ
Current 0.95A
Input power 65W

4
.ILLUSTRATED STRUCTURE
1 LIGHT SWITCH 2 LED DISPLAY 3 TEMP KEY
4 KEY LIGHT 5 FAN MASK 6 SHELF
7 FOOT 8 REAM COVER 9 UP CLIP BOARD
10 INDICATOR LIGHT 11 GLASS DOOR 12 DOWN CLIP BOARD
.ELECTRIC PRINCIPLE DIAGRAM

5
.OPERATION OF REFRIGERATOR
● The temperature is adjusted in the range of 11º-18ºin
the cabinet.
● When the power is connected, cooling system starts to
work. The TEMP-ADJ button is set on certain position,
which means that if the temperature in the wine cooler
reaches the point set, Self-control Temperature System
stops cooling system so the temperature in the cabinet
rises gradually.
● When the inside temperature rises above the set point,
Cooling Self-control Temperature starts to work again,
the cellar enter into cooling circles.
● The TEMP-ADJ button is set on one certain point when
the cellar is off the assembling line. When you want to
change the temperature in the cabinet, please push the
TEMP-ADJ button according to the indicator “ + ” or “ – ”.
● When push the right TEMP-ADJ button, the temperature
in cabinet will rise. On the contrary, push the left
TEMP-ADJ button “ – ”, it will go down.
NOTE:
After you setting the temperature, the LED display will
return to show the temperature in the cooler, but it could
turn to the point that you have set gradually.

6
. PARTICULAR PRECAUTIONS
● In order to function at its potential, this wine cooler
needs to be placed on flat floor, with 2cm spaces at each
side and 10cm at the backside.
● Use the adjustable ( iron case ) to place the cellar fully
horizontal.
● Avoid direct sunshine and carry high temperature.
● Do not place heavy articles on the top of the cellar.
.MAINTENANCE
● Shut off power supply before cleaning cabinet.
● Take out wines and shelves, and then clean the cabinet
with soda water first and with clean water last.
● Do not use soap or detergent for the cabinet.
● Clean the cellar regularly.

7
. TROUBLESHOOTING
Symptoms Possible cause Solutions
No cooling
Plug not put in
Low voltage
Fuse broken
Put in the plug
Ensure normal voltage
Change fuse
Not cold
enough
temperature
inside
The
refrigerator is
placed too
near heat
source;
Bad
ventilation;
Fans don’t
work;
The door is
not closed
tightly or
opened too
frequently or
for too long
time;
Keep the refrigerator away from
sunshine or other heat source;
Place the refrigerator in the area
with good ventilation and keep
things away from the fans;
Check whether the plug is
connected or change the fan;
Close the door tightly and don’t
open the door too frequently or for
too long time.
Peculiar smell
inside
refrigerator
Check whether
there is any sour
inside
Wrap the source or take it out
Inside light
flash
Set
temperature
higher than
inner
temperature;
The automatic
defrost
function start
to work
Adjust the adjustor
Normal function. No repair needed
Frost on the
cold sink
Too much humidity
or too low
temperature inside
the case
Output the plug, stop the power, and
defrost by hand, Connect power again
when the ice thaws
For service please contact::
A.G. I SERVICE
Tel: [phone].651.2534