Avantree Sacool Pro User manual

1. Headset overview
NOTE: All accessories are also available on avantree.com
2. Connect
2.1 Connect with mobile phone
STEP 1 Turn Sacool Pro off (press and hold MFB button for 4s).The LED indicator flashes red and
you will hear “power off”.
STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately
and you will hear “Paring”.
STEP 3 Activate Bluetooth on your phone and select “Avantree Sacool Pro”.

2.2 Connect with PC/notebook
STEP 1 Turn Sacool Pro off (press and hold MFB button for 4s). The LED indicator flashes red and
you will hear “power off”.
STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.
STEP 3 Activate Bluetooth on your PC/notebook and select “Avantree Sacool Pro”.
NOTE: Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you
may need a Bluetooth audio adapter to add the feature on PC/notebook that does not support
A2DP. For details on how to set up with PC/notebook, please see support.avantree.com
2.3 Connect with two mobile phones simultaneously
STEP 1 Connect headset with the first phone as above. Then Turn off Bluetooth of the first phone.
STEP 2 Connect headset with the second phone as above. Then turn off the headset.
STEP 3 Turn on Bluetooth of the first phone. Then Turn on the headset.
STEP 4 It will automatically connect with the second phone, after that please tap from the first
phone to manually connect it.
3. How to wear the Sacool Pro
STEP 1 Hold the headset as shown, with the button side in your left hand.
STEP 2 Put the earbuds in your ears, with the cord over the ears and to back of your head.
STEP 3 Adjust position of earbuds in your ears for maximum comfort.
STEP 4 Adjust length of cable using the silicone piece to make the headset secure.

NOTE: Make sure your phone is in an armband / pocket / handbag on the left of your body.
Otherwise, disconnection might be caused by your body blocking the Bluetooth signal.
4. How to use
MFB
On/Off
Press and hold MFB 4s
MFB
Answer a call
Press MFB once
MFB
End a call
Press MFB once
MFB
Reject a call
Double click MFB
MFB
Redial last number
Double click MFB
“V+”and “V-”
Voice Dial / Command
Short press “V+”and “V-”
MFB
Play music
Press MFB once

MFB
Pause music
Press MFB once
V+
Volume up
Press “V+”once
V-
Volume down
Press “V-”once
V+
Next track
Press and hold “V+”
V-
Previous track
Press and hold “V-”
5. How to charge
When the LED blinks red, you should recharge your headphones. Please remove the micro-USB
protector and charge the headset via the supplied USB to AC adapter or PC USB port. It normally
takes about 2 hours to fully charge the battery. The LED will stay red when charging and will turn
off when charging is complete.
NOTE: AC adapter requirement 5V / 500mA-1A.
6. Product specifications
Bluetooth version: 4.0 with EDR
Support profiles: Headset, Handsfree, A2DP, AVRCP
Operational range: Class 2, 10 metres
Battery: rechargeable lithium battery
Talk time: up to 8.5 hrs
Music time: up to 8 hrs
Standby time: up to 80 hrs
Headset weight: 18g
Headset size: 36.2mm(L)x21.2mm(H)X29.7mm(W)
NOTE: The talk and standby times may vary when used with different mobile phones or other
compatible Bluetooth devices and are also dependant on different usage styles, settings and
operating environment.