Avantree BTHS-TWS110 User manual

True Wireless Earbuds
BTHS-TWS110
User Manual
Product Overview
How to wear
Basic operation
Connect to a mobile device
LED indicator status
Charging
Reset / clear pairing history
1
1
2
3
6
6
8
·······················································································
········································································································
·············································································································
································································································································
·······················································································
·························································································································
··················································································································

Product Overview
1
How to wear?
v-
MFB
/v+/
LR
Choose a snug-tting pair of earbud tips - M works for most (Fig.1)
Insert earbud and adjust for secure t (Fig.2)

2
Basic operation
(Fig.1) (Fig.2)
Short press once
Put the earbuds into the charging case and they will power o and
commence charging.
Or long press for about 5s, LED light will illuminate RED for about 2s,
then turn o.
FUNCTION OPERATION
Power On
Power O
Take out from charging case.OR short press about 1s, LED light will
illuminate WHITE about 1s.
Pairing Remove BOTH earbuds from case - one will automatically enter pairing
mode and its LED will ash WHITE and RED alternately
Play / Pause
Volume Up / Down Short press the in the RIGHT / LEFT earbud
Previous / Next Track
Short press once
Long press the in the LEFT / RIGHT earbud
Active Voice Assistant
Answer / End A Call
Long press about 1s then release

3
Connect to a mobile device
NOTE: Make sure to remove BOTH earbuds from case for rst time use with a new mobile device.
First use >
1. Remove BOTH earbuds from the charging case. They will connect to each other, and within 10s one of the
earbuds will enter pairing mode - its LED will ash WHITE and RED alternately
ash WHITE and RED
2. Activate Bluetooth on your device. Search and select “Avantree TWS110” to connect. All the LEDs will
turn o once connected. Now you can stream audio.
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree TWS110 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
Bose Bluetooth Audio...
Avantree TWS110
Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
or

4
After rst use (Reconnect), please >
1. Ensure the Bluetooth on your device is on.
2. Remove BOTH earbuds from the charging case. Wait for 5~10 seconds, they will connect to the LAST PAIRED
device.
Note: If it fails to reconnect, please click “Avantree TWS110” on your device to manually connect.
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree TWS110 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
Bose Bluetooth Audio...
Avantree TWS110
Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
Bose Bluetooth Audio...
Avantree TWS110
Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
Not Connected
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree TWS110 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.

5
Connect to a NEW device>
1. Make sure the Bluetooth on previously connected device is o.
2. Follow the steps in the “First use” section to connect to a new device.
Mono earbud use >
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree TWS110 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4G
PM 2:00
2G
2G
Bluetooth
Bluetooth
Penetration Test
Allow peripheral devices to be checked
AT&T
T-mobil
Connected
MoreSeach Devices
Devices Name
Received Devices
My Devices
Available Equipment
Avantree TWS110
AB Shutter3
iPhone(2)
Honor 9
4G
PM 2:00
2G
2G
Bluetooth
Bluetooth
Penetration Test
Allow peripheral devices to be checked
AT&T
T-mobil
No target device found? View possible
causes No target device found? View possible
causes
MoreSeach Devices
Devices Name
Received Devices
Available Equipment
Avantree TWS110
AB Shutter3
iPhone(2)
Honor 9
Either side can be used separately as a mono earbud.
1. Make sure you have previously connected the earbuds with your phone as a TWS pair rst.
2. Just remove the earbud you want from the case and it will automatically reconnect.
Note that button functions remain unchanged, so R earbud controls volume up and next track.

LED indicator status
Ready to pair
Connected
Not connected
Charging
Fully charged
EARBUDS STATUS LED INDICATOR
Flashes WHITE and RED alternately
Turns o
Flashes WHITE once every 5s
Solid RED
Turns o
6
Charging
Charge the earbuds >
When you hear a voice prompt “battery low”, please put the earbuds into the charging case to charge. It normally
takes about 1 hour to fully charge.
During charging the LED on the earbud will illuminate red. When fully charged, the LED will turn o.
low battery
how to charge
charging

7
low battery
charing
Charge the charging case >
A fully charged case can charge the earbuds 5-6 times, providing up to an additional 24 hours of play time.
When all the LEDs on the case ashes white rapidly about 5 times every 20 seconds, you should fully recharge the
case (takes about 2.5 hours).
Please use a DC 5V / 0.5-2A USB wall charger / car charger / computer USB port with the included Micro USB cable
to charge.
While charging, the LED will ash white based on the battery level. When fully charged, all the LEDs will stay
white until you pull o the charging cable.
100%
25%
50%
75%
ash WHITE 5 times/20s
DC 5V / 0.5-2A

8
Reset / clear pairing history
If the earbuds exhibit abnormal behavior, e.g. can’t pair with device, please ‘reset’ your pairing history:
1. Put both earbuds back into the charging case. Make sure the earbuds are powered o and charging.
2. Press and hold on both earbuds for about 15s, until the LEDs turn WHITE for about 2s. (You can also
operate one by one.)
charging
hold 15s
turn White for 2s

9
3. Both earbuds are now reset to their factory settings.
Note: In order to pair again with your phone please delete "Avantree TWS115" you’re your phone's Bluetooth
menu and refer to “First use” section.
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree TWS115 Not Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Bluetooth Avantree TWS115
Forget This Device