Avantree Repose User manual

Model No.: BTHS-NB20
Avantree Repose
User Manual

REPOSE
User Manual
1
Table of Contents
Product Overview
Button Functions
LED Indicators
Charging the Earbuds
Connecting the Earbuds to Your Device
Specications
FAQ
Contact Us
2
3
3
4
5
7
8
9

Product Overview
ON OFF PAIR
ON / OFF
/
Multifunctional button
L
LED status indicator
LED charging indicator
Charging port
1
2
3
A
B
REPOSE
User Manual
2
EN

LED Indicators
Button Functions
Switch to "ON / OFF" position to turn the
earbuds on / o
No. Button Functions
Press & hold for 3 seconds to enter pairing mode
Tap once to play / pause
Tap once to accept / end call
Press & hold for 2 seconds to reject call
Press & hold“+ / -” for 2 seconds to
skip / replay track
Tap“+ / -” once to increase / decrease volume
ON OFF
PAIR
1
2
3
No. Status
Charging
Low battery
Power on
Power o
Connected
Disconnected
Out of range
Indicator & Voice Prompt
Solid red
Red ash every 5 seconds
Solid blue
Solid red for 1 second then o
LED o, "CONNECTED" voice indicator
Solid blue
Blue ash every 5 seconds
Alternate red & blue ashes, "PAIRING"
voice indicator Pairing
A
B
REPOSE
User Manual
3
EN

Charging the Earbuds
Battery Low
L
1.5H
Low Full
L
The earbuds' LED will ash red every 5 seconds to indicate low battery.
Plug the provided micro USB charging cable into the charging port, then
connect the other end to a 5V/500mA-2A rated USB adapter (your
phone charger or similar should work) or PC USB port.
Solid red lights on the earbuds indicate that charging is in progress;
once the lights turn o, your earbuds will be at full battery.
REPOSE
User Manual
4
EN

Connecting the Earbuds to Your
Device
STEP 1
Turn on the earbuds. For rst time use, the earbuds will enter PAIRING
mode automatically.
If not, put your earbuds into PAIRING mode by pressing & holding the
PAIR button until the LED ashes red & blue alternately.
STEP 2
Turn on your device's Bluetooth and select "Avantree Repose" in the
Bluetooth menu.
L
L
Hold for 3s
ON
5
REPOSE
User Manual
EN

NOTE: You'll need to adjust the volume on both the earbuds &
your phone to reach the lowest volume levels.
STEP 3
Keep the earbuds close to your device and wait for 5-10 seconds or until
they connect. Once they're successfully connected, the earbuds' LED
indicator will turn o.
For subsequent use, your earbuds should automatically reconnect to the
last-paired device within a few seconds of being turned on. If not, you
can manually activate reconnection by tapping the PAIR button once, or
by selecting "Avantree Repose" in your device's Bluetooth menu.
L
Accessory
Accessory
Avantree Repose
Avantree Aria
MY DEVICES
“Connected"
REPOSE
User Manual
6
EN

v5.0Bluetooth version
Audio codec support
Supported proles
Operating range
Playtime
Max volume
Charging time
Impedance
Frequency response
Power port
Power supply
Weight
FastStream, SBC
HSP v1.2, HFP v1.6, AVRCP v1.4, A2DP v1.2
Up to 30ft / 10m
Up to 18hrs
~1.5hrs
6mm
16Ω
20Hz - 20KHz
Micro USB
5V/500mA-2A rated USB charger
29g
96 dB
Specications
Drivers
REPOSE
User Manual
7
EN

FAQ
Below are some of the most common questions people have during
setup.
What’s the best way to take care of & maintain upkeep for my
earbuds?
Regularly cleaning your earbuds before and after use not only protects
them from potential damage, but also helps eliminate sound muing
issues. You can use dry cotton swabs or similar to gently wipe dust,
earwax, and oil from the earbud tips on a regular basis in order to
maintain upkeep.
Can I replace the earbud tips?
Unfortunately, no. The Repose is designed with smaller-than-average
earbud tips that are optimized for sleeping comfort, so the tips are not
replaceable. You can return your Repose within 60 days of purchase for
a full refund as long as nothing has been damaged or broken. Please
contact us at [email protected] to initiate this process, and feel
free to check out NB18 & NB16 to see if they’d better suit your needs!
Can I connect the earbuds to my TV?
You can technically connect your Repose directly to a smart TV via the
TV's built-in Bluetooth, but doing so will result in signicant audio
delays. In order to utilize the Repose's FastStream codec for no lip-sync
delays, you'll need to pair with a transmitter that also supports
FastStream, such as the Avantree Orbit or Audikast.
You can nd a full FAQ list at avantree.com/support/repose, or contact
us directly for additional assistance.
REPOSE
User Manual
8
EN

Contact Us
Support Tickets avantree.com/submit-a-ticket
Support Email [email protected]
FAQ avantree.com/support/repose
USA / CA [phone] (9am-6pm PST, Mon-Fri )
UK [phone] (9am-6pm, GMT, Mon-Sat)
DE [phone] (11am-9pm, CET, Mon-Sat )
FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
IT [phone] (9am-6pm, CET, Mon-Sat )
ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
Product Registration avantree.com/product-registration
REPOSE
User Manual
9
EN

Model No:BTHS-NB20
Dispose of the packaging and this product in accordance with the latest provisions.
Z-PKQG-NB20-V2