Avantree BTHS-134 User manual

Wireless Earbuds for Sport
BTHS-134
User Manual
Product Overview
How to wear?
Basic operation
LED indicator status
Connect to mobile device
Connect with 2 mobile devices simultaneously
Reconnect
Charging
Clear pairing history / Reset
Troubleshooting
1
1
3
3
4
5
6
7
8
8
············································································································
············································
······························································································································
·······················································································································
···················································································································
································································································································
·······················································································
········································································································
···························································································
················································································································

Product Overview
1
Choose suitable size
Multi-function
button
Fitting method
How to wear?
Drape the headset cord behind your neck and attach the clothing clip to the back of your shirt to maximize t
and stability for headphone.
Wear the headset

2
Another option for improving t and stability is to cinch the excess cord up into a loop with the clip instead of
attaching it to your clothing

Press once
Press once
FUNCTION OPERATION
General
Music control
Power ON
Power OFF
ENTER PAIRING MODE
Press & hold for about 3 seconds until LED illuminates BLUE for
about 1s.
From o status,press & hold for about 5 seconds until LED
ashes BLUE and RED alternately.
Press & hold for about 3 seconds until LED illuminates RED for
about 1s, then goes o.
Press once
Next / previous track
Play / pause music
Volume up / down Short press + or -
Active Voice Assistant - Siri /
Google Assistant (Phone feature)
Answer / end a call
Reject a call Long press for 2 seconds in a call
Once connected, double click
Reconnect
Call control
Long press + or -
3
Basic operation
LED indicator status
Ready to pair
Connected
Disconnected
Battery low
Charging
Headset Status LED indicators
Flashes BLUE and RED alternately
Flash BLUE twice every 4 seconds
Flash BLUE once every 2 seconds
Flash RED 4 times every minute
Solid RED
RED light turns oFully charged

1. Note: The HS134 will enter pairing mode when powered on for the FIRST TIME.
After that, set the headset to PAIRING MODE if you need connect to a NEW device.
• Set headset to PAIRING MODE - From o status, hold for about 5 seconds until
LED ashes BLUE and RED alternately.
• Activate Bluetooth on your device; search and select “Avantree HS134” to connect.
• Once connected, LED will ash BLUE twice every 4s, you will hear a voice prompt “Connected”. Now you can
stream audio.
Connected
4
Connect to mobile device
hold 5S
4:30 4G
Settings Bluetooth
Bluetooth
Bose Bluetooth Audio...
Avantree HS134
Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree HS134 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
AirDrop, AirPlay, and location services require Bluetooth.

hold 5S
• Pair & connect with the rst device following the above guides.
• Turn off the Bluetooth of the rst device.
• Repeat steps in above “Connect to mobile device” section to add the second device.
5
Connect with 2 mobile devices simultaneously
4:30 4G
4G
PM 2:00
2G
2G
Settings Bluetooth
Bluetooth
Bluetooth
Bluetooth
Penetration Test
Allow peripheral devices to be checked
AT&T
T-mobil
Connected
MoreSeach Devices
Devices Name
Received Devices
My Devices
Available Equipment
Avantree HS134
AB Shutter3
iPhone(2)
Honor 9
OPPO R9s
huawei
Avantree HS134 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
AirDrop, AirPlay, and location services require Bluetooth.
4G
PM 2:00
2G
2G
Bluetooth
Bluetooth
Penetration Test
Allow peripheral devices to be checked
AT&T
T-mobil
No target device found? View possible
causes No target device found? View possible
causes
MoreSeach Devices
Devices Name
Received Devices
Available Equipment
Avantree HS134
AB Shutter3
iPhone(2)
Honor 9

Normally, when turning HS134 on, it will automatically reconnect to the LAST CONNECTED device. If not, please
click once or select “Avantree HS134” on your Bluetooth device to manually reconnect.
Reconnect
OR
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree HS134 Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree HS134 Not Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree HS134 Not Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
• Turn on the Bluetooth of rst device. Then connect the HS134 on the device manually.
Note: This only works for two mobile devices simultaneously, such as mobile phones and tablets; not for PCs or
Bluetooth transmitters.
6

battery low
When the LED ashes RED and you hear the “battery low” prompt, you should fully recharge the HS134 for about
90 minutes. The LED will remain RED while charging and turn o when it is full.
You can plug it into a USB wall charger (DC 5V / 0.5-2A) or computer USB port that is powered on.
DC 5V / 0.5-2A
7
Charging

hold 10S ashes RED 3 times slowly
4:30 4G
Settings Bluetooth
Bluetooth
OPPO R9s
huawei
Avantree HS134 Not Connected
Bose Bluetooth Audio... Not Connected
Now discoverable as “iPhone(2)”
MY DEVICES
OTHER DEVICES
To pair an Apple Watch with your iPhone, go to the Watch
app.
4:30 4G
Bluetooth Avantree HS134
Forget This Device
From o status, press & hold for about 10 seconds. DO NOT RELEASE until LED ashes RED 3 times slowly. It
will power o thereafter. The HS134 will enter pairing mode automatically next time you turn it on.
• Ensure the HS134 is in Pairing mode – LED will ash BLUE and RED alternately.
• For Smart phone, tablet and PCs
- Turn the Bluetooth o and then on again.
- Delete “Avantree HS134” from your device Bluetooth list and then try to pair again.
8
Clear pairing history / Reset
Troubleshooting
Headphones do not pair with Bluetooth device?
• Clear the headphones pairing history and pair again.

Ensure your mobile device is not in a metal case and placed on the right side of your body. Otherwise,
Bluetooth cross-body issues may cause poor reception, which may cause sound cuts in and out.
9
Sound cuts in & out?