aventon SINCH 2020 User manual

SINCH QUICK START GUIDE
GETTING STARTED
Press and hold the “M” button on the handlebar controls to turn on the
display. Now, your ebike is ready to ride. To turn o, press and hold
“M” for 3 seconds.
The Sinch ebike oers pedal assist. When using pedal assist, an
electric motor supplements the rider’s own eort. To use the pedal
assist, simply start pedaling, then tap the “U” or “D” arrows to increase
or decrease the amount of pedal assist. Pedal assist will engage at
speeds up to 20 MPH.
The Sinch ebike is equipped with a throttle, which is mounted near
the rider’s left thumb, to propel the bike without pedaling. To use the
throttle, start pedaling then apply the throttle. Once the bike is moving
on throttle power, you can stop pedaling entirely and use your thumb
to control the speed of the bike. The throttle can propel you at speeds
up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake levers,
or release the throttle. Simply start pedaling again to re-engage the
motor.
BATTERY AND CHARGING
We recommend charging the battery indoors, in moderate
temperature conditions. You can charge the Sinch battery both on and
o the bike. To charge the battery, plug the charger into the charging
port and then connect the charger to a wall outlet. The LED indicator
light will be red when charging and will turn green when charging is
complete.
MAINTENANCE AND SERVICE
Properly maintaining your Sinch ensures its longevity and smooth
operation. Before assembling your bike, please watch the “How To
Assemble” video we’ve prepared for you. If you have questions during
the assembly process, please contact Aventon at [phone] or
email [email protected].
SAFETY
You should wear an approved bicycle helmet every time you ride
a bicycle, regardless of the legal requirement to do so. You should
comply with local law when riding your Sinch ebike.
SINCH QUICK START GUIDE

SPEED INDICATOR
(Current / Max / Average)
5 LEVELS OF ASSIST
(0: No Assist. 5: Max Assist)
WALK MODE
(On / O)
DISTANCE INDICATOR
(Current Trip / System Mileage)
ERROR CODE INDICATOR
(In the Event of a Problem)
BACKLIGHT INDICATOR
(On / O)
BATTERY LEVEL INDICATOR
(Current / Max / Average)
VOLTAGE OUTPUT INDICATOR
(Real-Time)
SINCH QUICK START GUIDE
DISPLAY CONTROL PAD
REFLECTORS
(Front & Rear)