Avenview SPLIT-DVI Series SPLIT-DVI-2 User manual

www.avenview.com
1
SPLIT-DVI Series
User’s Guide
Models
Split-DVI-2
Models
Split-DVI-5
© 2008 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.

www.avenview.com
2
Table of Contents
Section 1: Getting Started...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 3
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 4
1.6 Before Installation.................................................................................................................. 4
1.7 Installation ............................................................................................................................. 5
1.8 General Troubleshooting ....................................................................................................... 6
Section 2: Specifications......................................................................................................................... 6

www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.

www.avenview.com
4
1.4 Introduction
Avenview SPLIT-DVI-2 / SPLIT-DVI-5 DVI Distribution System lets your one digital video signal (Set-Top boxes,
DVD Player or PC) with DVI output and distributes it to two or more digital displays such as PC Monitor, HDTV,
or Projector.
-Supports both PC Monitor and HDTV display by function switch
-Supports HDCP compliant device
-Compatible with DVI Standard by DDWG
-The use of standard DVI-D Plug
-Support 480i, 480p, 720i, 720p, and 1080i resolution for HDTV
-Supports up to WUXGA (1920 x 1200) resolution for Monitor
-Connects two or more digital display at the same time from the same digital video source
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-SPLIT-DVI-2 or SPLIT-DVI-5 x 1
-Power Adapter (+5VDC, 1.2A) x1
-User’s Manual
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com
5
1.7 Installation
The installation of SPLIT-DVI-2 or SPLIT-DVI-5 is simple:
1. Power off display source such as DVD Player, Set-top box
2. Connect the DVI cable into each display source and display
3. Connect DVI cable which is attached to display source into SPLIT-DVI-2 or SPLIT-DVI-5
4. Connect Power to SPLIT-DVI-2 or SPLIT-DVI-5
5. For HDTV Signal select HDTV from Function Switch and for PC Signal select PC
HDTV Signal
PC Signal

www.avenview.com
6
1.8 General Troubleshooting
Problem
Possible Solution
No Image
Check if connection to the computer and the monitor are
correct.
Ensure that Source device is connected
Check to see if cables are connected properly
Screen Defects Appear
This product supports up to WUXGA resolution.
Check the DVI connection
Check the maximum resolution range of the graphics card.
Section 2: Specifications
Item
Description
Video Bandwidth
165MHz (Single Link)
Connector
DVI-D Receptacle Typle
Input Channel
1
Output Channel
2 (SPLIT-DVI-2) or 5 (SPLIT-DVI-5)
Power
5VDC
Power Consumption
7.5 Watt
Maximum Supported
Resolution
HDTV: 480i, 480p, 720i, 720p, and 1080i
Monitor: Supports up to WUXGA (1920 x 1200)
Environmental
Operation
0˚to 50˚C Degree

www.avenview.com
7
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.