AVer X18iS User manual






X18iS
User Manual

Product is to marked to read the instructions before use or with the symbol.
WARNING
AVERTISSEMENT
ALWAYS FOLLOW SAFETY PRECAUTIONS
RESPECTEZ TOUJOURS LES CONSIGNES DE SÉCURITÉ
IMPORTANT SAFEGUARDS
Death or serious injury may occur when children climb on audio and/or video
equipment furniture. A remote control or toys placed on the furnishing may
encourage a child to climb on the furnishing and as a result the furnishing
may tip over on to the child.
Relocating audio and/or video equipment to furniture not specifically
designed to support audio and/or video equipment may result in death or
serious injury due to the furnishing collapsing or over turning onto a child.
UV-C light hazard – avoid exposure to eyes/skin.
Il y a un danger de blessures graves ou même de mort si un enfant grimpe
sur un meuble pour matériels audio ou vidéo. Une télécommande ou un jouet
laissés sur le meuble peuvent inciter l'enfant à y grimper, ce qui peut
provoquer le basculement du meuble sur l'enfant.
Le repositionnement de matériels audio ou vidéo sur un meuble non
spécialement conçu pour cela peut causer la mort ou des blessures graves
par effondrement ou renversement du meuble sur un enfant.
Risque de lumière UV-C - éviter toute exposition aux yeux / à la peau.


UV-C Light Hazard
• When cart is in use, there is
UV-C light inside.
• Eye and skin hazard — avoid
exposure to eyes/skin.
• Do not look directly at U V-C light.
Take precautions to protect eyes
and skin from direct exposure.

ONLY ADULTS should
move the cart.
Le chariot ne doit être déplacé
QUE PAR DES ADULTES.

NEVER climb, sit
or stand on the cart.
Personne ne doit s'asseoir,
se tenir ou grimper sur
le chariot.
 








CAUTION!
DO NOT allow anyone to sit, stand, or climb on the cart.
DO NOT lift the cart.
DO NOT block the ventilation holes used for air circulation.
DO NOT overload objects on the cart shelves. (Work platform maximum
loading = 20kg / 44.09lbs; each shelf maximum loading = 32.7kg / 72lbs).
DO NOT put any devices that exceed the maximum loading weight on top of
cart.
DO NOT open the doors when disinfecting.
Before disinfecting, please make sure the doors are closed. We strongly
recommend you to lock the doors.
When moving the cart, DO NOT put any devices (e.g. TV, Monitor,
Documents camera, etc.) on top of the cart.
DO NOT use any TV/monitor/display on top of the cart.
Before moving the cart, disconnect the power from the wall outlet.
While moving the cart, make sure the power cord is tightly wrapped and
secured.
ATTENTION!
PERSONNE ne doit s'asseoir, se tenir ou grimper sur le chariot.
IL NE FAUT PAS soulever le chariot.
IL NE FAUT PAS obstruer les orifices de ventilation qui permettent à l'air de
circuler.
IL NE FAUT PAS surcharger d'objets les étagères du chariot (charge
maximale de la plateforme de travail : 20kg / 44,09lbs ; charge maximale de
chaque étagère : 32,7kg / 72lbs).
NE placez AUCUN appareil dépassant le poids de chargement maximum
sur le dessus du chariot.
N’ouvrez PAS les portes lors de la désinfection.
Avant de commencer la désinfection, veuillez vous assurer que les portes
sont fermées. Nous vous recommandons fortement de verrouiller les portes.
Pour déplacer le chariot, IL NE FAUT poser aucun appareil (poste de TV,
moniteur, caméra pour documents, etc.) sur le haut dudit chariot.
N'UTILISEZ AUCUN téléviseur / moniteur / écran sur le dessus du chariot.
Avant de déplacer le chariot, débranchez la prise secteur.
Pendant le déplacement du chariot, veillez à ce que le cordon d'alimentation
soit correctement replié et fixé.
SAVE THESE INSTRUCTIONS

FCC NOTICE (Class A)
NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radiofrequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to
the contents of this documentation, its quality, performance, merchantability, or
fitness for a particular purpose. Information presented in this documentation has
been carefully checked for reliability; however, no responsibility is assumed for
inaccuracies. The information contained in this documentation is subject to change
without notice.
In no event will AVer Information Inc. be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use this product or
documentation, even if advised of the possibility of such damages.
TRADEMARKS
“AVer” is a trademark owned by AVer Information Inc. Other trademarks used
herein for description purpose only belong to each of their companies.
COPYRIGHT
©2021 AVer Information Inc. All rights reserved.
All rights of this object belong to AVer Information Inc. Reproduced or transmitted
in any form or by any means without the prior written permission of AVer
Information Inc. is prohibited. All information or specifications are subject to
change without prior notice.

The mark of Crossed-out wheeled bin indicates that this product must
not be disposed of with your other household waste. Instead, you need
to dispose of the waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic
equipment. For more information about where to drop off your waste
equipment for recycling, please contact your household waste disposal
service or the shop where you purchased the product.
Contact Information
USA
AVer Information Inc.
https://www.averusa.com
668 Mission Ct.,
Fremont, CA 94539
Tel: [phone]
Toll-free: [phone]
Technical support: [e-mail]


Contents

Package Contents ................................................................................................ 1
Dimensions ........................................................................................................... 1
Diagram ................................................................................................................ 2
Secure the Cart..................................................................................................... 3
Door Lock ............................................................................................................. 3
UV Lamp Installation............................................................................................. 5
Cable Management .............................................................................................. 6
Charging Cart ....................................................................................................... 8
Adaptive Intelligent Charging System................................................................... 9
UV Lamp Panel Setup ........................................................................................ 10
LED Indicators .....................................................................................................11
Troubleshooting .................................................................................................. 12
Specifications...................................................................................................... 13
Service and Warranty ......................................................................................... 14
Appendix – Earthing ........................................................................................... 15

1
Package Contents
The following items are included in the package. Please check if each item is
available before using.
User Manual Door Key x4
Power Cable
UV Lamp x6
X18iS Cart
Dimensions
687mm (27.05”)
1070mm (42.13”)
638mm (25.12”)

2
Diagram
4
3
11
7
9
6
58
3
2

Front Side Back
1. Work platform
2. UV lamp panel
3. Observation
windows
4. Handle
5. Door lock
6. 5” direction
lockable caster
7. 5” lockable caster
8. LED indicators
9. Auxiliary outlets
10. USB firmware upgrade
port (not for charging
or storage)
11. Power switch
12. Power cable wrap
brackets
13. Power inlet
14. Earthing screw
15. Door lock
16. Security hook

3
Secure the Cart

Door Lock
Unlock the door
The number on the key
must match the number
on the door lock
Use key to unlock the door.
1

2
Turn the door lock to vertical position
to open the door.


4
Lock the door
To lock the door, close the door and turn the door lock back to horizontal position.
Then, use the key to lock the door.
For more security, use padlock to double secure the door.
Optional
[Note] The shackle dimension of front and back doors are limited to Ø8mm
(0.31”).

5
UV Lamp Installation

1. Set the power switch to the OFF position. Unplug the power cord.
2. Open the rear door and find the lamp holders above the drawer.
3. Find the UV lamps in the package.
4. Loosen screws of both sides of lamp holders and rotate the lamp holders down
90°.
5. Install the UV lamps on lamp holders and rotate the UV lamps 90° until you
hear a click sound.
6. Push the lamp holders back and tighten the screws.
7. Plug the power cord. Set the power switch to the ON position.
[Warning]
Before disinfecting, please make sure the doors are closed. We strongly
recommend you to lock the doors.
DO NOT open the doors during disinfecting.

6
Cable Management
Back
1. Open the rear door.
2. Bundle the DC power cord with cable tie or zip-tie (not supplied) and leave
proper length for connecting to the device.
3. For the ventilation purpose, EPEs are purposed placed alternately. Do not
remove the EPEs. Place the power adapter into the rest individual adapter
compartment.
4. Pass the DC-end of the adapter cable to the front of the cart through the space
provided.
5. Plug-in the AC-end power cord to the corresponding power AC socket.
[Notes]
It is recommended to use cable ties (not supplied) to secure and manage
cables.
It is recommended to allocate 2 persons for efficient device cabling.

7
Front
1. Open the front doors.
180°

2. Release the cable clamp by pulling locking feature (A).
3. Route the adaptor DC-end cable along with the V-shape routing groove.

(B)
(B)
(A)

4. Snap the locking piece (B) to firmly secure the DC-end cable.
5. Place the mobile device into the bay.
6. Plug in the DC-connector to the mobile device.

8
Charging Cart
Wall outlet
Connect power cord to
the cart and wall outlet.
Set the power switch to
“ON” to begin charging.

[Notes]
Set the power switch to the OFF position before plugging the cart to wall outlet.
Auxiliary outlet and power inlet type may vary as they are country dependent.

9
Adaptive Intelligent Charging System
18 bays for X18iS are divided into 2 zones (12 bays for each zone). It is
recommended to plug the top bays into the top zone.

10
UV Lamp Panel Setup
1. Select the Auto/Manual Mode Slide Switch to start disinfecting automatically
or manually.
a. If Auto mode is chosen, close the front and rear doors and disinfecting will
start in 30 seconds.
b. If Manual mode is chosen, close the front and rear doors and press
Start/Stop Button to begin disinfecting. Press Start/Stop Button to stop
disinfecting.
c. Auto/Manual modes can be reselected even during disinfecting. The UV
lamps will turn off and reset as the new selected mode.
[Note] Four sensors are installed at front and rear doors. If the front or rear
doors are open during disinfecting, the UV lamps will automatically turn off to
protect the user’s eyes/skin.
2. UV Setup LED Status
Status Description
Solid Green Front doors and rear doors are closed. Ready for
disinfecting.
Solid Blue Manual mode: Press Start/Stop Button to begin
disinfecting.
Automatic mode: Disinfecting will start in 30
seconds.
Solid/Flashing
Orange
Ensure doors are properly closed.
Solid/Flashing
Red
System error. Please contact AVer’s technical support
team: [e-mail]
3. Use the Time Slide Switch to select the disinfecting duration: 5, 10, 15 or 20
minutes.
[Note] The sanitizing duration can be reselected even when the UV lamps are
on. The UV lamps will turn off and reset as the new selected duration.