Avery Dennison MONARCH 9417+ User manual

Avery Dennison® and Monarch® are registered trademarks of
Avery Dennison Corporation.
TC9417PQR Rev. AA 6/16 ©2016 Avery Dennison Corp. All Rights Reserved.
AVERY DENNISON® MONARCH® 9417+
QUICK REFERENCE GUIDE
See our Website, www.rbis.averydennison.com, for more
information.Review the Safety Sheet provided with your printer.
1. Cover 6. Power Cord Connection
2. Display 7. Ethernet Port
3. Left Printer 8. USB (Type B) Port
4. Right Printer 9. USB (Type A) Port
5. Speaker 10. Power Button
Using the Printer

2-EN
Setting the Time and Date
1. Press the Tools button then select Admin.
2. Enter the Admin password and press Enter.
The default password is 1234.
3. Press Set Time/Date.
4. Change the time and date as needed then press OK.
Printing Labels
1. Turn on the printer.
2. Press the product button of the label to print.
3. Select the number of labels and press Enter.To print one
label, press Enter.
4. Labels print for the selected product.
Note: To print a Use First label, press the Tools button, Use
First, then select the number of labels to print.

EN-3
Loading Labels – Left Printer
1. Turn on the printer then open the cover.
2. Pull on the supply tab.
3. Unlock the supply guide and remove it.
4. Place a roll of labels (label side up) on the supply holder.
Place the supply guide on the supply holder.

4-EN
5. Lock the supply guide.
6. Put the supply tab back.
7. Guide the labels along the inside edge and into the slot.
The printer feeds the supply.
8. Slide the supply lever next to the supply. Close the supply
lever.
9. Close the cover.

EN-5
Loading Labels – Right Printer
1. Turn on the printer then open the cover.
2. Pull on the supply tab.
3. Unlock the outer supply guide and remove it.
4. Place a roll of labels (label side up) on the supply holder.
5. Replace the outer supply guide and lock it in place.
6. Unlock the inner supply guide, move it until it touches the
supply, lock it into place.

6-EN
7. Put the supply tab back.
8. Guide the labels along the outside edge and into the slot.
The printer feeds the supply.
9. Slide the supply lever next to the supply and close it.
10. Close the cover.