Avery Weigh-Tronix Eyecon 9430 User manual

Eyecon 9430
Pill Counting, Inventory and Validation System
Quick Reference Guide
AWT35-100034
Issue AA

Eyecon is a part of Avery Weigh-Tronix. Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose
ultimate parent company is Illinois Tool Works Inc (“Illinois Tool Works”). Copyright © 2020 Illinois Tool Works. All rights reserved.
No part of this publication may be reproduced by making a facsimile copy, by the making of a copy in three dimensions of a two-dimensional
work and the making of a copy in two dimensions of a three-dimensional work, stored in any medium by electronic means, or transmitted
in any form or by any means, including electronic, mechanical, broadcasting, recording or otherwise without the prior written consent of the
copyright owner, under license, or as permitted by law.
This publication was correct at the time of going to print, however Avery Weigh-Tronix reserves the right to alter without notice the
specification, design, price or conditions of supply of any product or service at any time.
Eyecon_9430_qug_en_100034.book

Eyecon 9430 Quick Reference Guide 3
Quick Reference Guide
Quick Reference Guide
This Quick Reference Guide is not intended to cover all aspects of the Eyecon 9430's
capabilities. Refer to the Instruction Manual at www.eyeconvpc.com for more details on
other modes and specific operations.
Eyecon Package Contents
(1) Eyecon 9430 Visual Pill Counter
(2) Pill Spatulas
(1) Quick Reference Guide
(1) Red Penicillin Contamination Platter
(1) Yellow Sulfa Contamination Platter
(1) Blue Hazardous Contamination Platter
(1) AC power cord for USA and Canada operation
General Description
CAUTION: The Eyecon contains components that can be damaged by rough
handling. Unpack all items carefully.
The Eyecon 9430 uses advanced machine vision
technology to accurately count tablets and capsules
(pills). Each drug has an associated Drug Number, drug
name and shadow pill used for counting.
Photos of the counting platter are captured five times per
second and analyzed to determine the number of pills on
the tray. Depending on configuration, color photos of the
pills, vial, stock bottle, and funnel are captured.
Light Ring and Top Camera, Color
Top Camera, Black and White
Color Touch Screen
Side Camera, Color
Counting Platter, Tilting
Funnel and Funnel Gate
Barcode Scanner, 2D
Platter Storage

4 Eyecon 9430 Quick Reference Guide
Installation
When choosing where to install the Eyecon 9430, consider the following.
lThe Eyecon 9430 is a precision piece of equipment that can be damaged by
rough handling.
lThe label at the base of the neck (shown below) must be visible at all times
so that the top camera can perform necessary auto focus routines during
power up and when not performing a transaction.
Initial Power Up
1. Insert the power cable into the receptacle located on the back of the Eyecon.
2. The Eyecon 9430 must be installed near an easily accessible socket outlet.
Plug the power cord into the outlet.
3. When the Eyecon 9430 is first connected to AC power, it will automatically turn
on. The display area will illuminate within a few seconds, followed by the
illumination of the Light Ring and a progress bar on screen.
4. The terms of the Eyecon End User License Agreement (EULA) must be
accepted before the unit can be used for the first time.
5. When the START screen is displayed, the Eyecon is ready for use.
Shutting Down
1. To shut down, tap the Shutdown key on the touchscreen.
Restart, Shutdown, or Cancel appear on screen.
2. Tap Shutdown.
The START screen briefly re-appears as the Eyecon 9430 completes
the power down routine. Once complete, the screen turns dark gray and
then to black and the light ring turns off.
WARNING!: It is essential to Shut Down or Restart the Eyecon by using the
Shutdown button on the touchscreen to prevent Windows generated issues.
Avoid turning off the Eyecon by removing power or unplugging from the outlet
before the screen goes from gray to black. The black screen will appear
approximately 5 seconds after the gray screen and indicates that it is safe to
unplug the Eyecon, if necessary.
Choosing Restart will power the Eyecon off and immediately re-boot. Choosing
Cancel will return you to the previous screen.

Eyecon 9430 Quick Reference Guide 5
General Operation
General Operation
This section provides very basic instructions for operating the Eyecon 9430. Refer to
the Instruction Manual at www.eyeconvpc.com for more details on other modes and
specific operations.
Turning the Eyecon On
To turn the Eyecon on, simply press the button on the rear of the machine. There will
be a short delay (approximately 5 seconds) before the Eyecon begins the power up
routine described in Initial Power Up. Once the power routine is complete, the START
screen is displayed.
Configuration
The Eyecon can be customized to meet the needs of your pharmacy through a variety
of parameters. The most commonly adjusted parameters are listed below. These
parameters are part of the Settings menu which is covered in detail in the User Manual,
available at www.eyeconvpc.com.
General
lDrug Substitution: Specify whether you require an exact match of the
prescribed drug or if substitutions are allowed.
lAllow an Under-Fill: Specify whether partial fills are allowed.
Barcode
lBarcode Type: Specify whether a PMS interface or a barcode containing Rx,
NDC, & Qty will be used to ensure the prescription is dispensed correctly.
m Adjust the subsequent parameters if a barcode is being used.
l2D Barcode Expiration Rules:
m Specify the number of days prior to the expiration date that will cause
warnings or prevent use of that stock item.
Data
lDatabase Sharing
m Enable SQL Sharing if multiple Eyecons are deployed in one facility.