Avtech KPC-148E User manual

326Z
K148E_V1.1
USER MANUAL
High Resolution IR Camera Series
The product image may differ from the actual product.
Please read the instructions thoroughly before using the product.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do not
dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or
remove any content in this manual at any time.
C
CA AU UT TI IO ON N: :
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of such
damages.
C
CA AU UT TI IO ON N
R
RI IS SK K O OF F E EL LE EC CT TR RI IC C S SH HO OC CK K

OVERVIEW
This high resolution camera contains day and night feature, built-in 35 IR LEDs and IP67
standard approved waterproof outdoor housing. Besides, it is very easy to install.
FEATURES
1. Cable management to prevent intentional cable damaging
2. High resolution of 520 TV Lines
3. High sensitivity in the dark environment, 0.1 Lux / F2.0, 0 Lux (IR ON)
4. Day and night features for 24-hour surveillance
5. IR distance: up to 35 meters with 35 IR LEDs
6. IP67, suitable for outdoor use
PACKAGE CONTENT
 IR camera * 1
 Bracket * 1
 Power & video cable x 1
 User Manual * 1
 Installation Sticker * 1
SPECIFICATIONS*
MODEL High Resolution Model
Pick-up Element 1/3" H.R. Color CCD image sensor
Number of Pixels 768(H) x 494(V) <NTSC> / 752(H) x 582(V)) <PAL>
Resolution 520TVL
Min. Illumination 0.1 Lux / F2.0, 0 Lux (IR ON)
IR LED 35 units
IR Effective Range Up to 35 meters
S/N Ratio More than 48dB (AGC OFF)
Electronic Shutter 1/60 (1/50) to 1/100,000 sec.
Lens f6.0mm / F2.0
Lens Angle 54˚
White Balance ATW
AGC Auto
IRIS Mode AES
IP Rating IP67
Video Output 1.0 Vp-p composite, 75Ω
Operating Temperature -20℃~40℃
Power Source (±10%) DC12V
Current Consumption (±10%) 70mA (IR OFF); 400mA (IR ON)
Weight (g) (±5%) 570
Dimensions (mm)** 142(H) x 75 (Φ)
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm

INSTALLATION

CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75Ωcoaxial cable.
NOTE: To ensure the camera has sufficient protection against moisture, an extra waterproof measure,
such as by using an insulating tape, must be used to cover the power and video connectors after
connection.