axing ISW 9-42 User manual

State of the art 2016-11-29 - Technical changes, design modifications,
errors and misprints are subject to change without prior notice.
WEEE Nr.
DE14023300
Your device is marked with the WEEE symbol (Waste Electronics
and Electrical Equipment). This means that the electrical and
electronic components must not be disposed of as residual waste.
Used electrical and electronic components must be disposed of
separately.
Technical Data:
Supported Audio-Video Formats
Video codecs: MPEG1/2 MP@HL, H.264 HP@level 4.1,
H.265 (HEVC), MPEG4 part 2 (ASP),
WMV-9(optional),
VC1 video, XviD;
3D and HD video supporting
(up to 40 Mbit/s and above)
Audio Decoder MPEG-1 layer I/II, MPEG-2 layer II,
MPEG-2 layer III (mp3),
Dolby Digital plus (optional)
Supported video modes 1080i, 1080p, 720p, 576p, 480?, PAL, NTSC
Audio-Video Interfaces
Audio Connectors TRRS
Output 2 V RM
Nominal Loading 10KOhm
Composite Video Interface Type TRRS
Output 1Vp-p
Ethernet
Connector RJ-45 shielded
Cable UTP and STP 5 categories
Speed Auto-choice, 10/100 Mbit/s
USB Interface USB 2.0
Power supply Interface
Connector DC cylindrical 2.1 mm x 5.5 mm
Type plug-and-socket, DC current, center plus
Input 12V±10%
Power in typical conditions Less than 10W
Common
Dimensions (d × w × h) 87 x 127 x 30 mm
Operation temperature 33°F…104°F (1°C…40°C)
Humidity (without condensate) 5% ~ 93%RH
Power Supply Unit
Type: Pulse with universal inlet
Input: 110-240 VAC, 50-60 Hz.0,5 A max
Output: 12V DC 1A
ISW 9-42
IPTV Set-Top-Box
Quick start guide
Safety instructions
4 Do NOT use the device near water or in rooms with high humidity
such as humid cellars or near swimming pools.
4Do NOT use the device outdoors. All connections must be located
inside a building.
4Keep the device away from rain, moisture, vapor, dust or liquids.
4Do NOT install the device, use it or perform maintenance during a
thunderstorm. There is a risk of electric shock during thunderstorm.
4Connect ONLY appropriate accessories to the device.
4Make sure that all cables are connected to the correct port.
4Carefully lay all cables to ensure that nobody can step on or
stumble over them.
4Do NOT cover the ventilation slots of the device since insufficient air
supply may result in damage to the device.
4Do NOT place any objects on the device. Position the device in a
place where NOBODY can step on it.
4The maintenance should be affected by qualified specialists in
service centers only. Prior to maintenance or dismounting work,
disconnect all cable from the device.
4In case of damage, interrupt the power supply.
4Do NOT try to repair the device. Contact your local retailer to order
a new device.
4Do NOT open the device or unit. Opening the device or removing its
covers causes risks, for example due to high voltage. This device
should ONLY be repaired or uninstalled by qualified service
personnel. For more information, contact your retailer.
4Use the accessories supplied with your arrangement or
recommended by the manufacturer only. Using of the accessories
which are not supplied or not sanctioned by the manufacturer may
be dangerous for the User or do harm to the arrangement
operation. Using of the not appropriate accessories eliminates
guarantees of the product therewith.
4Handle the device with care, do not drop, shake it and afford other
influence.
4Do not use cleaner or polish, benzyl, solvents, abrasive items, liquid
or aerosol detergent means for the product and accessories
cleaning.
Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EWR contact adress
Bechler GmbH
Am Rebberg 44
78239 Rielasingen

Using remote control to control the device
Remote control requires two batteries type AAA, R03, LR03, UM-4, 286.
Important information about using batteries
4Do not mix different types of battery or old and new batteries.
4Do not use rechargeable batteries with the remote control.
4Remove the batteries from the remote control if you are not going to use for several weeks, to avoid the risk of leakage.
4Please respect your environment and any local regulations and dispose thoose old batteries in a responsible manner.
Caution! Do not attempt to recharge the batteries. Immediately remove any leaking batteries. Take care when handling leaking
batteries as they may cause burns to the skin or eyes, or other physical injuries.
1. USB
2. S/PDIF
3. HDMI
4. 4-pin 3,5 mm jack,
composite video output, stereo line output
5. Ethernet
6. RC
7. Power Supply
Display elements and connectors
Product description
The product is intended to select digital audio & video channels from transport
streams, decode and display them on TV. Any other use is prohibited.
Use the accessories recommended by the manufacturer only.
The power supply unit is fitted out with a country-specific power plug.
The product is designed for horizontal allocation onto flat surface.
Connecting with HDMI – best quality
Connecting with AUDIO/VIDEO Input – good quality
Installation and connection
Warning! Switch off all the devices (TV, amplifier, etc.) and take the power
supply unit out of the socket before connecting or disconnecting any cable.
The remote control includes a special block of five programmable buttons
(marked with blue print colour), which you may want to choose for controlling
other devices (TV set, amplifier).
white = left channel, red = right channel
yellow = composite video
1 USB
2 IR-receiver
3 Indicator of stand-by mode/
Indicator of the Remote Unit Buttons pushed
Green = Connection
Yellow = Activity
Note: A detailed operating instruction is available under
www.axing.com | Download.