AXIOMTEK GOT810 User manual

GOT810-845
10.4”XGA TFT
Touch Panel Computer
User’s Manual
IP69K certification distinguishes the highest level
of reliability

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate
information. Axiomtek Co., Ltd. assumes no responsibility for any infringements of
patents or any third party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the
accuracy, completeness or usefulness of any information in this document. Axiomtek
does not make any commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any
time without notice.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.
Copyright 2019 Axiomtek Co., Ltd.
All Rights Reserved
Mar 2019, Version A1
Printed in Taiwan

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1. The GOT810-845 does not come equipped with an operating system. An
operating system must be loaded first before installing any software into the
computer.
2. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in
any static-shielded devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the GOT810-845 before any installation. Be
sure both the system and external devices are turned OFF. A sudden surge of
power could ruin sensitive components that the GOT810-845 must be properly
grounded.
4. The brightness of the flat panel display will be getting weaker as a result of
frequent usage. However, the operating period varies depending on the
application environment.
5. Turn OFF the system power before cleaning. Clean the system using a cloth
only. Do not spray any liquid cleaner directly onto the screen. The GOT810-845
may come with or w/o a touchscreen. Although the touchscreen is chemical
resistant, it is recommended that you spray the liquid cleaner on a cloth first
before wiping the screen. In case your system comes without the touchscreen,
you must follow the same procedure and not spray any cleaner on the flat panel
directly.
6. Avoid using sharp objects to operate the touchscreen. Scratches on the
touchscreen may cause malfunction or internal failure to the touchscreen.
7. The flat panel display is not susceptible to shock or vibration. When assembling
the GOT810-845, make sure it is securely installed.
8. Do not open the system’s back cover. If opening the cover for maintenance is a
must, only a trained technician is allowed to do so. Integrated circuits on
computer boards are sensitive to static electricity. To avoid damaging chips
from electrostatic discharge, observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of
the system unit chassis for a few seconds. This will help to discharge any
static electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd. IBM, PC/AT, PS/2, VGA are
trademarks of International Business Machines Corporation.
Intel®and Atom™are registered trademarks of Intel Corporation.
MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corporation.
VIA is a trademark of VIA Technologies, Inc.
SST is a trademark of Silicon Storage Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.Other brand names and
trademarks are the properties and registered brands of their respective owners.

iv
Table of Contents
Disclaimers.....................................................................................................i
Safety Precautions.......................................................................................iii
Trademarks Acknowledgments..................................................................iii
CHAPTER 1 Introduction ...........................................................1
1.1 General Description...................................................................1
1.2 Specifications.............................................................................2
1.2.1 Main CPU Board................................................................................................2
1.2.2 I/O System .........................................................................................................2
1.2.3 System Specification..........................................................................................3
1.3 Dimensions.................................................................................4
1.4 I/O Outlets...................................................................................5
1.5 Antenna installation (optional)..................................................6
1.6 Package List...............................................................................7
CHAPTER 2 System Configurations .........................................9
2.1 I/O Pin Assignment ....................................................................9
2.1.1 Serial Port Interface...........................................................................................9
2.1.2 Ethernet ...........................................................................................................10
2.1.3 USB Port..........................................................................................................10
2.1.4 DC Power Jack w/ M12 connector...................................................................10
2.2 Water-proof Cables..................................................................11
2.2.1 Power cable .....................................................................................................11
2.2.2 Power adapter for GOT810-845 ......................................................................12
2.2.3 COM.................................................................................................................13
2.2.4 USB cables ......................................................................................................13
2.3 Mounting Method .....................................................................14
2.3.1 VESA mounting................................................................................................14
2.3.2 VESA-ARM Mounting.......................................................................................15
CHAPTER 3 AMI BIOS Setup Utility........................................17
3.1 Navigation Keys .......................................................................17
3.2 Main Menu.................................................................................18
3.3 Advanced Menu........................................................................19
3.3.1 NCT6106D Super IO Configuration.................................................................20
3.3.2 Hardware Monitor............................................................................................21
3.3.3 ACPI Settings ..................................................................................................21
3.3.4 CPU Configuration...........................................................................................23
3.3.5 SATA Configuration.........................................................................................24
3.3.6 USB Configuration...........................................................................................25
3.3.7 Utility Configuration..........................................................................................25
3.3.8 PCIE/mSATA Mini Card Configuration............................................................26
3.4 Chipset Menu............................................................................27
3.4.1 North Bridge.....................................................................................................27

v
3.4.2 South Bridge....................................................................................................28
3.5 Security Menu...........................................................................29
3.6 Boot Menu.................................................................................30
3.7 Save & Exit Menu .....................................................................31
CHAPTER 4 Drivers Installation..............................................33
4.1 System ......................................................................................33
4.1.1 Win 7................................................................................................................33
4.1.2 Win 8/8.x..........................................................................................................34
4.2 Touch Screen ...........................................................................35
4.2.1 Specification.....................................................................................................35
4.2.2 Driver Installation- Windows 7/8.x ...................................................................35
4.3 Embedded O.S..........................................................................37
4.3.1 WES 7 & WE8S...............................................................................................37

vi
This page is intentionally left blank.

GOT810-845 User’s Manual
Introduction
1
CHAPTER 1
Introduction
This chapter contains general information and detailed specifications of the GOT810-845.
Chapter 1 includes the following sections:
General Description
Specification
Dimensions
I/O Outlets
Package List
1.1 General Description
The GOT810-845 is a fan-less and compact-size touch panel computer, equipped with a 10.4”
XGA TFT LCD display and an Intel® Pentium® Processor N3060 (2M Cache, 1.60 GHz),
providing excellent computing performance and thermal resistance. This fanless platform is
especially designed for space-limited applications in food and beverage industry.
GOT810-845: 10.4”TFT XGA Fanless Touch Panel Computer
Reliable and Stable Design
The GOT810-845 adopts a fanless cooling system which makes it suitable
for vibration environments.
Embedded O.S. Supported
The GOT810-845 not only supports Windows 7, Windows 8.x and Windows
10, but also supports embedded OS,. For storage device, the GOT810-845
supports an optional half –slim SSD device and a mSATA..
Industrial-grade Product Design
The GOT810-845 has an incredible design to be used in different industrial
environments.
The whole enclasure meets the IP66 standard.
For connecting other devices, the GOT810-845 also features several
interfaces: USB, Ethernet, and RS-232/422/485.

GOT810-845 User’s Manual
Introduction
2
1.2 Specifications
1.2.1 Main CPU Board
CPU
Intel® Pentium® Processor N3060 (2M Cache, 1.60 GHz) onboard
System Memory
One 204-pin DDR3L SO-DIMM socket
Maximum memory up to 8GB
BIOS
AMI UEFI BIOS
Power
Wide range power 9V~36VDC
1.2.2 I/O System
Standard I/O
1 x RS-232/422/485(default RS-232) (M12 A-code connector)
1 x RS-232 Only(M12 A-code connector)
1 x M12 for USB 2.0 x 2 (M12 A-code connector)
Ethernet
1 x M12 for Ethernet (X-code)
Expansion
2 x PCIe Mini-card slot
1 x full size Mini-card for mSATA
1 x full size Mini-card for WiFi
Storage
1 x mSATA
1 x SATA

GOT810-845 User’s Manual
Introduction
3
1.2.3 System Specification
10.4”TFT LCD
10.4”XGA 350nits, resolution: 1024x768
Heat Dispensing Design
Disk drive housing
One 2.5”SATA drive (optional)
Net Weight
2.8Kgs (6.17 lb)
Dimension (Main Body Size)
284mm x 241mm x 56mm
Operation Temperature
-10℃to 50℃
Relative Humidity
20% to 90% @ 40℃, Non-Condensing
Vibration
2G / 10 ~ 500Hz / operation (SSD/mSATA, random)
Note
1. All specifications and images are subject to change without notice.
2. The GOT810-845 is suited on serious environment; please choose the wide
temperature DRAM and SSD.
3. If the operation temperature is higher than 35 ℃ , the wide temperature
HDD is recommended to be used on the device.
4. If the operation temperature is higher than 45 ℃ , the wide temperature
SSD is recommended to be used on the device.
Warning: According to the warrantee is adopt for the IP66 guarantee, please choose SSD
and RAM by Axiomtek, also please kindly don’t disassemble the system by
youself.

GOT810-845 User’s Manual
Introduction
4
1.3 Dimensions
This diagram shows you dimensions and outlines of the GOT810-845.

GOT810-845 User’s Manual
Introduction
5
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT810-845.
No
Function
1
Backlight ON/OFF
2
Brightness Adjust
3
Power Switch(ATX)
4
Ventilation valve
5
DC power connector (A-coded)
6
COM1(configure RS422/485, default RS-232, A-code)
7
COM2(RS232 Only, A-code)
8
USB2.0 ×2 (A-code)
9
Ethernet (X-code)

GOT810-845 User’s Manual
Introduction
6
1.5 Antenna installation (optional)
If you have the optional wireless module, you will find the antenna in the accessory box. The
installation instructions are as follows

GOT810-845 User’s Manual
Introduction
7
1.6 Package List
When you receive the GOT810-845, the bundled package should contain the
following items:
GOT810-845 x 1
Driver CD x1
DC cable x1
Power Adapter (optional)
Water-proof Power / USB / LAN / RS-232 cables (optional)
Water-proof Antenna for Wifi or UMTS/HSPA+ (optional)
VESA ARM(optional)
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT810-845 User’s Manual
Introduction
8
This page is intentionally left blank.

GOT815-834 User’s Manual
System Configurations
9
CHAPTER 2
System Configurations
The GOT810-845 provides rich I/O ports and flexible expansions for you to meet different
demand, for example, CF. The chapter will show you how to install the hardware. It includes:
I/O Pin Assignment
Hard Disk and DRAM
Wireless LAN Card (Optional)
Water-proof cables (Optional)
Hanging and VESA mounting (Optional)
2.1 I/O Pin Assignment
The GOT810-845 has two serial ports, COM1(RS-232/422/485, default RS-232) and
COM2 (RS-232 Only) , Ethernet, USB, and DC-in 9~36V connecter.
2.1.1 Serial Port Interface
The following table shows you the pin assignments of this connector:
Note
Each port +5V Maximum: 2A, +12V Maximum: 1A.
Warning: According the warrantee is adopt for the IP66 guarantee, please inform the COM1
setting when ordering, also please kindly don’t disassemble the system by
youself.
When receiving information via RS422/485, if there appear some wrong
codes, please check whether to connect to GND at both ends. The
standard method of RS422/485 is to connect GND at both end and make
sure that receiver and transmitter have the common ground.
Pin
RS-232
RS-422
RS-485
1
DCD
TX-
Data-
2
RXD
TX+
Data+
3
TXD
RX+
No use
4
DTR
RX-
No use
GND
GND
GND
5
DSR
No use
No use
6
RTS
No use
No use
7
CTS
No use
No use
8
RI
No use
No use

GOT810-845 User’s Manual
System Configurations
10
2.1.2 Ethernet
The GOT810-845 is equipped with a high performance Plug and Play Ethernet interface, full
compliant with IEEE 802.3 standard, and can be connected with a M12 X-CODE LAN
connector.
Please refer to detailed pin assignment list below:
2.1.3 USB Port
The USB is a Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector on the rear
I/O. It is commonly used for installing USB peripherals such as keyboard, mouse, scanner, etc.
2.1.4 DC Power Jack w/ M12 connector
Pin
Signal
Pin
Signal
L1
MDI0P
L5
MDI2P
L2
MDI0N
L6
MDI2N
L3
MDI1P
L7
MDI3P
L4
MDI1N
L8
MDI3N
Pin
Signal
Pin
Signal
1
USB VCC (+5V level)
5
USB VCC (+5V level)
2
USB #0_D-
6
USB #1_D-
3
USB #0_D+
7
USB #1_D+
4
GND
8
GND
Pin
Signal
1
+9~36V
2
+9~36V
3
GND
4
GND
5
Earth Gound

GOT815-834 User’s Manual
System Configurations
11
2.2 Water-proof Cables
GOT-800 series uses specific M12 connector for water-proof. Therefore you will order each
cable base on application.
There are four kind cables of GOT810, by the optional, if you will apply the USB, COM or
Etherent then you can select a cable for the package.
The Power cable included in the accessory box, when you will need the power adapter, also it
can be sesected by optional.
2.2.1 Power cable
Please follow pin assignement for the power input.
Pin
Signal
V+
DC 9~36V power input
Earth Ground
GND
GND
GND
GND

GOT810-845 User’s Manual
System Configurations
12
2.2.2 Power adapter for GOT810-845
If you order the power adapter, you should choose the power cord type for your location.
The power adapter is +24VDC(90W), 110-240V which is combined M12 connector.
The power adapter is +24VDC(60W), 110-240V which is combined M12 connector.
The adapter is all waterproof with EU cable

GOT815-834 User’s Manual
System Configurations
13
2.2.3 COM
There are two COM cables which are combined M12 connector. Also, you can refer 2.1.1 for
the Series port pin assignement.
2.2.4 USB cables
The USB cable is combined M12 connector for water-proof. It is extended two USB ports for
applicaton.

GOT810-845 User’s Manual
System Configurations
14
2.3 Mounting Method
There are two mounting ways for the GOT810-845. One is suspension, the other is
VESA mount.
2.3.1 VESA mounting
The GOT810 can accept VESA 100.