AXIOMTEK EBOX640-500-FL Series User manual

©Copyright 2017 Axiomtek Co., Ltd.
Version A1 Jan 2017
Printed in Tai an
9416K640000E
4
Installation of Express Mini Card
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 There are eight screws on the top heatsink are used to fasten
the heatsink to the chassis.
Step 3 Remove the top cover.
Step 4 Locate Express Mini card slot within the red line marked.
Step 5 Slide Mini Card into Mini Card slot with caution and fasten
screw of Express Mini Card.
Step 6 Assembly the top cover back and fasten all screws.
Note: Please refer to the user’s manual to get more detail information.
eBOX640-500-FL Quick Installation Guide
©Copyright 2017 Axiomtek Co., Ltd.
Version A1 Jan 2017
Printed in Tai an
9416K640000E
1
Packing List
System Unit x 1 DVD/CD x 1 (for Driver & Manual)
Quick Installation Guide x 1 Screw pack x 1
3-pin phoenix type connector
(P=3.81mm) x 1 HDD bracket x 2
Foot pad x 4 Thermal Grease x 1
 Do not try to apply power to the system if any damaged components.
Dimensions
eBOX640-500-FL Series Embedded S stem

©Copyright 2017 Axiomtek Co., Ltd.
Version A1 Jan 2017
Printed in Tai an
9416K640000E
2
I/O Outlets
The following figures show I/O outlets on the eBOX640-500-FL.
Front View
© Copyright 2017 Axiomtek Co., Ltd.
Version A1 Jan 2017
Printed in Tai an
9416K640000E
3
Installation of Hard Disk Drive
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the rear side,
and then loosen two screws.
Step 3 Remove the bottom cover and locate SSD/HDD within the red
line marked.
Step 4 Please prepare the following items to assemble SSD/HDD.
Step 5 Fasten two screws to fix SSD/HDD and connected the
SSD/HDD directly and make sure the insertion is complete.