AXIOMTEK OPS500 Series User manual

4 9412M500020E
©Copyright 2016 Axiomtek Co., Ltd.
Version A1 October 2016
Printed in Taiwan
Installing the Mini PCIe cards
The OPS500 series provides one Mini card slot for user to install
mSATA/ wireless LAN cards, please refer to the following
instructions and illustration.
Step 1 Loosen the screws per illustrated.
Step 2 Then open the cover carefully.
Step 3 You can find the position of Mini PCIe slot and please
insert it then fasten screw by yourself.
Step 4 Fasten all of screws with bracket to finish installation.
OPS500-501 Quick Installation Guide
9412M500020E 1
©Copyright 2016 Axiomtek Co., Ltd.
Version A1 October 2016
Printed in Taiwan
Checklist
OPS module x 1 Driver Disc x 1
M4 x 6 screw x 2 M2 x 5 screw x 2
Quick Installation Guide x1 Thermal Grease x 1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Please refer to the product information CD for the complete user’s
manual, drivers and utilities. User’s manual and related documents are
in Acrobat PDF format.
Dimensions
OPS500-501 Series 6th Gen Intel Core Open Pluggable Specification (OPS) Digital Signage Player

2 9412M500020E
©Copyright 2016 Axiomtek Co., Ltd.
Version A1 October 2016
Printed in Taiwan
Installing the Memory Module
Step 1 Loosen the screws on the real of chassis as illustrated.
Step 2 After losing the screws, extract the real of chassis out of the
module.
Step 3 Place the memory module into the socket and press it
firmly. The socket latches are levered upwards and
clipped on to the edges of the DIMM.
Step 4 The DRAM installation is finished, please fasten all of
screws with bracket.
9412M500020E 3
©Copyright 2016 Axiomtek Co., Ltd.
Version A1 October 2016
Printed in Taiwan
Installing the HDD/ SSD
The OPS500 series provides one 2.5” SATA HDD tray to install 2.5”
HDD. When please refer to the following instructions and illustration
Step 1 Loosen the screws per illustrated.
Step 2 Please refer to the below photo to connect the target
2.5”HDD/SSD with HDD’s bracket.
Step 3 Then plug HDD drive in to HDD connector.
Step 4 Finally, fasten two screws on HDD cover firmly.