AXIOMTEK OPS520 Series User manual

4 9412M520000E
© Copyright 2021 Axiomtek Co., Ltd.
Version A1 Apri 2021
Printed in Taiwan
Wireless Module (M.2 Key E Card)
Step 1 Locate screws at the chassis and loosen four screws.
Step 2 Hold the system with your middle fingers at the Lock Hole,
and use your thumbs press enough force on the front panel,
meanwhile; lift up the upper case with your middle fingers.
Step 3 Slowly insert the M.2 Key E card into the M.2 slot until it is
fully inserted. Then secure the M.2 Wi-Fi Module to the
carrier.
OPS520 Quick Installation Guide
9412M520000E 1
© Copyright 2021 Axiomtek Co., Ltd.
Version A1 Apri 2021
Printed in Taiwan
Checklist

OPS
module
x 1

Q
uick Installation Guide
x
1

M
.2 thermal pad x 1

Thermal
G
rease
x
1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Dimensions
OPS5
20
Series
11
th Gen Intel
Core Open Pluggable
Specification
(
OPS Digital Signage Player

2 9412M520000E
© Copyright 2021 Axiomtek Co., Ltd.
Version A1 Apri 2021
Printed in Taiwan
DDR4 SO-DIMM DRAM Installation (SO-DIMM1)
Step 1 Turn the system upside down to locate screws at the
chassis as red marked and loosen five screws.
Step 2 Slide the bottom chassis out of the module and locate the
SO-DIMM socket on the board.
Step 3 Place the memory module into the socket and press it firmly.
The socket latches are levered upwards and clipped on to
the edges of the SO-DIMM.
Note: Please be informed that you can get more detail information
in OPS520 user’s manual.
9412M520000E 3
© Copyright 2021 Axiomtek Co., Ltd.
Version A1 Apri 2021
Printed in Taiwan
M.2 SSD Installation
Step 1 Turn the system upside down to locate screws at the
chassis as red marked and loosen five screws.
Step 2 Slide the bottom chassis out of the module, and locate the
M.2 2280 Key M slot on the board.
Step 3 Place the M.2 SSD card into the socket and press it firmly.
Then secure the M.2 SSD card to the carrier by tightening
up the one M3*4L pan head screw to the marked, then apply
the M.2 thermal pad on the M.2 2280 Key M SSD card.