Axis T8123 High PoE 30 W User manual

DATASHEET
Axis High Power over Ethernet (High PoE) midspans and
splitters enable Axis network video products to receive
data and power over the same Ethernet cable.
The High PoE products make it easier to install network
video products in areas where power cabling and outlets
are unavailable, thereby reducing installation costs.
The function of a midspan is to inject power into a
network cable. A splitter, which separates data and power
coming over an Ethernet cable, is used for a network
video product without built-in support for PoE.
Axis High Power over Ethernet midspans and splitters oer an easy, fast and cost-eective
solution for powering network video products, without the need to install power outlets and
electrical cabling.
Axis High Power over Ethernet midspans & splitters
High Power over Ethernet for Axis PTZ dome network cameras.
These midspans and splitters are used to power network
devices that require more power, as specied by the IEEE
802.3at standard. The midspans are also IEEE 802.3af
compliant, meaning that they can be used with all Axis
network video products with built-in PoE support.
AXIS T8124 provides 60W (two times IEEE802.3at) which
is required when operating AXIS Q60-E Network Cameras
in temperatures below -20 °C (-4 °F).
> Reduced installation
costs
> Support for Axis
PTZ dome network
cameras
> IEEE 802.3at
compliance
> IEEE 802.3af
compliance

©2012 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modications without notice.
Technical Specications – Axis High Power over Ethernet midspans
www.axis.com
46502/EN/R2/1205
Midspan
Model AXIS T81B22 DC 30 W Midspan (1-port)
AXIS T8123 High PoE 30 W Midspan 1-port
AXIS T8124 High PoE 60 W Midspan 1-port
Function Data and power are fed to a network video product through
an Ethernet cable; use together with a High PoE splitter for a
network video product without built-in PoE support
Data rate 10/100/1000 Mbps
Data & Power
Connectors Shielded RJ-45, EIA 568A and 568B
Network cables Shielded category 5 (or higher)
Wiring Data provided over pairs 1/2 and 3/6 for 10/100 Ethernet, over
all four pairs for Gigabit Ethernet
Power over spare pairs 4/5 (+) and 7/8 (-)
AXIS T8124: Power over pairs 1/2 (-), 3/6 (+), 4/5 (+) and 7/8 (-)
Output power AXIS T81B22: 51 V DC at: 12 V DC IN (max. 30 W)
24 V DC IN (max. 15 W)
AXIS T8123: 55 V DC (max. 30 W)
AXIS T8124: 55 V DC (max. 60 W)
Input power AXIS T81B22: 12/24 V DC (max 38/20 W)
AXIS T8123: AC Input Voltage: 100 to 240 V AC (max. 37 W)
AC Frequency: 50 - 60 Hz
AXIS T8124: AC Input Voltage: 100 to 240 V AC (max. 74 W)
AC Frequency: 50 - 60 Hz
Installation and
management
Plug-and-play installation; automatically detects PoE and High
PoE-enabled devices and supplies inline power
Local LED management display
General
Display and
indicators
Port interfaces are located on the front panel
AXIS T81B22: Power indicator: DC power
Network indicator: Port
AXIS T8123 and AXIS T8124: System indicator: AC power
Channel indicator: Power
For more information, see www.axis.com/techsup
Compliance RoHS, WEEE, CE
AXIS T81B22: IEEE 802.3af and IEEE 802.3at compliant at
12 V DC IN, only IEEE 802.3af compliant at 24 V DC IN
AXIS T8123 and AXIS T8124: IEEE 802.3af, IEEE 802.3at
Mounting Wall or shelf mounting
Approvals AXIS T81B22: FCC Part 15, Class B with FTP cabling
EN 55022 Class B (Emissions), EN 55024 (Immunity), VCCI,
EN 60950-1, ICES-003, C-TICK
AXIS T8123 and AXIS T8124: FCC Part 15, Class B with FTP
cabling
EN 55022 Class B (Emissions), EN 55024 (Immunity), VCCI
Safety: CB, UL/cUL per EN 60950-1, GS Mark per EN 60950-1,
KCC, UL-AR
Operating
conditions
Humidity max. 95% RH (non-condensing)
AXIS T81B22: -20 °C to 65 °C (-4 °F to 149 °F)
AXIS T8123: -10 °C to 55 °C (14 °F to 131 °F)
AXIS T8124: -10 °C to 45 ºC (14 °F to 113 ºF) at 60 W*
-10 °C to 55 ºC (14 °F to 131 ºF) at 30 W*
-10 ºC to 60 ºC (14 ºF to 140 ºF) at 25 W or less*
*output
Storage AXIS T81B22: -40 ˚C to 74 ˚C (-40 ˚F to 165 ˚F)
AXIS T8123: -20 ˚C to 70 ˚C (-4 ˚F to 158 ˚F)
AXIS T8124: -20 ˚C to 70 ˚C (-4 ˚F to 158 ˚F)
Dimensions
(HxWxD) and
weight
AXIS T81B22: 117 x 95 x 41 mm (4.6” x 3.7” x 1.6”)
AXIS T8123 and AXIS T8124: 51.3 x 87.9 x 166 mm
(2.0” x 3.46” x 6.53”)
AXIS T81B22: 200 g (0.4 lb.)
AXIS T8123: 350 g (0.7 lb.)
AXIS T8124: 400 g (0.8 lb.)
Included
accessories
AXIS T81B22: DC input terminal connector
Technical Specications – Axis High Power over Ethernet splitters
Splitters
Models AXIS T8126 High PoE Splitter 12V
AXIS T8128 High PoE Splitter 24V
Function Separate data and power coming over a network cable for a
network video product without built-in PoE support
Data & Power
Connectors Data & power in: Shielded RJ-45
Data out: Shielded RJ-45
Power out: DC barrel connector; with ‘+’ centered
Output current AXIS T8126: 2 A at 12 V DC
AXIS T8128: 1 A at 24 V DC
Input power max. 30 W
Installation Plug-and-play installation between midspan and camera
General
Compliance WEEE, CE
Operating
conditions
0 °C to 40 °C (32 °F to 104 °F)
Humidity max. 90% RH (non-condensing)
Approvals FCC Part 15 Class A FTP, Class A UTP
EN55022 (CISPR 22) Class A
Immunity EN55024 (CISPR 24)
Dimensions
(HxWxD) and
weight
94 x 31 x 73 mm (3.7” x 1.12” x 2.87”)
112 g (0.247 lb.)
Included
accessories
AXIS T8126 – cable adapters for AXIS 214 PTZ, AXIS 215 PTZ,
video encoders
AXIS T8128 – cable adapter for AXIS 232D+, AXIS 233D
For a complete list of supported products, please refer to
www.axis.com/products/pol/high_poe/supported.htm
More information is available at www.axis.com and on
products’ Installation Guide