1. Carefully remove the parts from the packaging: including one lamp, right & left
bases, adapter, x1 screwdriver, x2 screws, x2 3M base pads.
2. Connect the plug pin from lamp to the pin in the base.
3. Insert the lamp into the bases and screw them tightly.
4. Stick two pads on the base to increase stability.
5. Now the lamp is ready for use, place it on the table with a flat surface and plug
it in.
6. Press the power button to turn on.
7. Quick press the light button to choose the color temperature you want: cool light,
warm light or both.
8. To adjust the brightness, press and hold the light button, the lamp has a
stepless dimmer.
9. After use, turn off and unplug.
Do not operate the device if: 1.
The electrical cord or plug is damageda.
The unit is not working properlyb.
The unit has been dropped or damaged in any mannerc.
Avoid hanging the cord over a counter or table where it can be pulled by
children or tripped over unintentionally.
2.
Keep the cord away from heated surfaces.3.
Unplug the device when not in use. Allow to cool before handling, cleaning,
or storing.
4.
Clean with damp or dry cloth only.5.
Use of attachments or adaptor not approved or provided by the manufacturer
may cause hazardous conditions.
6.
The unit is only to be repaired by a qualified technician when found defective.7.
INSTRUCTION MANUAL
Thank you for purchasing the LUNA LED lamp. It is designed to maximize the
quality and comfort of your work. The manufacturer shall not be liable for any
injuries caused by failing to follow the instructions in this manual.
Keen LUNA LED Tabletop Lamp
Model No.: HUA-KLMP-9100 / HUA-KLMP-9100R
Voltage: 110V/240V 50Hz/60Hz
Power: 36W
Color Temperature: 3000K-6000K
CRI: RA>85
Luminance: 2000lm
Dimension: 31.5" (Diameter) x 16" (Height)
Material: Aluminum Alloy
Press the power button
to turn on/off
Quick press the light button to
select the color temperature
Press and hold light button to
select the brightness
