Azel MONO DBL200 User manual

Tel: [phone]www.azelite.com Fax: [phone] User Guide
Specication
Operating Input Voltage 5VDC/1.5A
Power Factor >0.4
Power Consumption 8W
Operating Temperature 0 to 40 °C
Storage Temperature -40 to 80 °C
Operating Humidity >90% (RH)
Weight 680g (excluding adapter)
Luminous Flux 200lm
Color Temperature 3000K
Color Rendering Index >80
Battery Charging Time Approx. 2hrs
Environment:
Warning:
Note:
Having the lamp turned on while charging will not aect the function of the lamp. However, the battery can be fully charged more
quickly when the light is turned o.
This product contains rechargeable battery. please do not dispose of the product in the household waste at the end of its useful life.
Disposal can take place at approved recycling or disposing locations in accordance with local regulations. The battery must be removed
from the appliance before it is scrapped and the appliance must be disconnected from the supply mains when removing the battery.
This product is for indoor use only.
It is normal that the unit will generate a small amount of heat during charging.
The light source contained in this product shall only be replaced by the manufacturer or his service agent or a similar qualied person.
LED Lamp
DBL200
MONO

1Pressing the power button
once will turn on the lamp.
It will light up in the
brightest setting.
2To dim the light, press and
hold the power button
while in the brightest
setting. The light will
continue to dim until you
see the light blink once,
indicating that you have
reached the dimmest state.
3To increase the brightness of
light, press and hold the
power button while in the
dimmest setting. The light
will continue to brighten until
you see the light blink once,
indicating that you have
reached the brightest state.
Adjusting brightness
1Connect the USB plug of the
adapter to the terminal found
on the charging base, then
connect adapter to power
outlet. Place the mobile device,
that is Qi wireless charging
compatible, onto the center
location of the charging base.
2The base will sound out a
“Beep” indicating that the
device battery is connected
and charging is in progress.
3When the charging base detect
that the battery level is full,
charging will automatically
stop to preserve the battery
life of the mobile device.
BEEP
Wireless charging for mobile device
Wireless charging for DBL200
1Connect the USB plug of the
adapter to the terminal found
on the charging base, then
connect adapter to power
outlet. Position the lamp
onto the center location of
the charging base.
2The base will sound out a
“Beep” and a blue light will
emit from the power button.
This indicates that the lamp
battery is connected and
charging is in progress.
3When the charging base
detect that the battery level
is full, the blue light will
cease to emit.
BEEP
Items in the box
DBL200
(Lamp)
DBL200
(Charging base) AC Adaptor
(Regional)
or
or
Micro USB Cable