b-intense b-control deluxe User manual

© b-intense®
Version 01/2021
Made in Austria
INFRAROTKABINEN
DE
FR
EN
NL
inkl. Anschlussplan der b-control Steuerungen
incl. installation manual of the b-control units
avec instructions de montage des systèmes de commande b-control
incl. montagehandleiding b-control besturingsinrichtingen
Bedienungsanleitung
b-intense®Infrarotkabinen
Operating Instructions
b-intense®infrared cabins
Manuel d’utilisation des cabines
à infrarouges b-intense®
Gebruiksaanwijzing b-intense®
infraroodcabines
230 Volt

36
EN

37
EN
Page Topic
CONTENT
39 General safety guidelines
40 General safety information
41 General warning notices
43 General application notes
44 Scope of application of b-intense®infrared cabins
47 Operation of the b-control units
49 Effects of wellness supplements
50 b-intense®moments App and Bluetooth function
51 Infrared programs
59 Cleaning and care of the b-intense®infrared cabin
60 Maintenance instructions
60 Disposal of the b-intense®infrared cabin
61 Certificate of Warranty
61 Declaration of conformity
63 Annex

38
EN
IMPORTANT SAFTEY GUIDELINES. PLEASE READ CAREFULLY AND
KEEP SAFE FOR LATER USE.
Welcome to the world of health and wellbeing of b-intense®infrared cabins!
We are pleased to welcome you as a b-intense®customer. Congratulations on the purchase of your b-intense®infrared cabin, we extend
our thanks for the trust you have placed in our product. With b-intense®you bought a high quality product. Some of the obvious USPs of the
b-intense®products are the intensive effect and the high manufacturing quality. We place great value on modern design, reduced structures
in the arrangement and integration of intuitive technology elements, and the selection of modern colours and materials.
The heart of our b-intense®infrared cabin is the infrared technology. The b-intense®infrared heater, especially developed and designed by
b-intense®, is not comparable with conventional infrared technologies. With this patented technology we offer our customers the effective
and full-spectrum health promoting effect in long-studied and independently tested composition. Due to the particular innovation of the
spliced, high quality protective glass the b-intense®heater is 100% hygienic.
The name b-intense®stands for an intense experience of wellness and health and encourages you to enjoy life with all its
advantages and with all your senses.
We wish you great pleasure and enjoyment every time you use your exclusive b-intense®infrared cabin and, to ensure you get the best use
from your purchase, we would like to make you familiar with a few operating instructions.
Please read these instructions carefully before installation and first use of your new b-intense®infrared cabin and keep them safe.
Your b-intense®team

39
EN
General safety guidelines
The b-intense®infrared heaters have been tested by TÜV Austria and positively evaluated by the Austrian Institute
of Technology Seibersdorf.
All electrical components comply with CE safety regulations. Check the b-intense®heaters for any foreign bodies before use to prevent
accidents. The b-intense®heaters comply with the relevant safety regulations for electric heating appliances. In case of damage of any kind
to the heaters, do not start your infrared cabin and consult a professional engineer to repair the damage or to replace parts of the system.
Observe safety instructions before use.
Store and operate in a dry environment.
Humidity must not excel 60%.
Not condensing.
Safety Warning: Never cover an infrared heater!
Make sure that the heater is not covered and no items are put on it.
Covering the infrared heater may cause a fire hazard.
Follow all safety instructions in this manual! Work on the
electrical wiring must only be carried out by a qualified electrician.
Turn the b-intense®cabin off first and always unplug it before repair
and maintenance or cleaning work is carried out!
There is a danger of electric shock!
Made in Austria
!

40
EN
General safety information
Check the required power supply. The operating voltage is announced
on the nameplate on the control and the infrared heaters.
1. The IR cabin must only be operated on an earthed shockproof socket,
which was installed and checked by a lincensed electrical company.
2. The used socket must only be operated with a fault-current circuit
breaker (FI) with a trip current of max 30mA and a circuit breaker
(safety device) of max 16A.
3. The used socket should be easily accessible after installation.
4. The IR cabin must not be operated on a multiple socket (fire hazard).
5. If used commercially, a professional annual check of the electrical
installation must be ensured by the operator.
Only original b-intense®component parts are safe for use. The use
of not certified components can lead to damages or injuries. Waranties
and guarantees expire with the use of not certified components.
Plugging the cabin in and out is only permitted by pulling the plug,
which is connected to the cable. Don‘t pull the cable itself, this could
damage the cable and lead to an electric shock.
Using this device next to other devices should be avoided, for it could
lead to incorrect operation. If it is necessary, all affected devices should
be monitored, to secure regular operation.

41
EN
If you feel burning or pain in the radiated
area, reduce the intensity of the back
heater immediately.
We recommend a warm shower and
applying a nurturing, moisturizing
lotion onto the still warm skin after
the infrared application.
General warning notices
Ensure that liquids do not come into
contact with the heaters or with the
timber facings.
Make sure that the heater is not
covered and that there are no objects
placed on it.
Avoid any contact with the heater while it
is in operation and immediately afterwards.
The high surface temperature of the heater
can cause burns.
Make sure that your hair does not
touch the heater while it is in operation.
Tie your hair up to leave your back
uncovered.
Allow the infrared heater to cool down for
10 minutes before re-starting the cabin.
Do not use the cabin within 24 hours
after sunbathing or using an artificial
UV source (e.g. sun bed).
Children are not allowed to play with
the device or to carry out any cleaning
or maintenance work.
Persons with limited sensation of heat,
persons under the effects of alcohol,
drugs, tranquilizers, are not allowed to
use the cabin.
Consult your doctor independently
concerning your infrared treatment after
operations, in case of illness, injuries,
pregnancy or in the case of plastic or
medical implants, as well as where there
is a risk of overheating, such as persons
with cardiovascular diseases or when
taking medication.
If you experience any discomfort, stop
your infrared treatment immediately!
If overheating occurs or if you feel the
temperature is too high, you can reduce
the radiation intensity or open the door
and switch on the ventilation.
Do not stare at an infrared heater for more
than 10 minutes. We recommend safety
glasses for sensible eyes (at least protection
level 4-4 by EN 171).
Exchange electronic components solely with
original components of the manufacturer.
All repairs must be performed by a qualified
engineer authorized by b-intense®.The
electrical components must not be opened.

42
EN
Special note: Use by children
Children until the age of 7 may not use the infrared cabin. Children over the age of 7 years as well as adolescents, who can follow instruc-
tions of operating personnel, are allowed to use the cabin under supervision. The heat settings must be adapted to the needs of children
and adolescents by the supervising adult. Adjust the headrest, so the radiation doesn‘t impact the back of the head directly.
Special note: Red back
A distinct redness in the exposed back area ist normal and desired, and happens due to the increased blood circulation. If the redness is
still visible more than 3 hours after application, reduce the radiation intensity or the duration of use the next time.
For questions or ambiguities please write a message to [e-mail].

43
EN
General application notes
b-intense®infrared cabins can be used
by the whole family.
You can enjoy your b-intense®infrared
cabin daily.
We recommend infrared sessions of
approx. 30-50 minutes, depending on
personal well-being, or a b-intense®
infrared program. After 60 minutes the
cabin switches off automatically.
A b-intense®infrared cabin doesn‘t
need preheating. Just sit down, switch it
on and enjoy immediately.
The infrared radiation must strike the skin
directly. Sit in the cabin with the upper body
naked, so that your spine is positioned direct-
ly in front of the back radiator, and lean back.
Usually, sweating starts after 10-15 minutes.
Adjust the neck support, so that the radiation
does not hit the back of your head directly.
Regulate the b-intense®infrared heater
intensity and adjust the additional features
according to your needs via the control
unit.
The b-intense®infrared control units
offer pre-installed user programs, e.g.
back, heatload or slim. See detailed
description on page 51.
Use a towel while sitting in the cabin.
The temperature in the b-intense®
infrared cabin reaches between 25°
and 40°C.
Mind your fluid balance and drink a glass
of water before and after each use of the
infrared cabin.
A lukewarm shower is recommended
after every infrared application. We also
suggest applying a nurturing, moisturi-
zing lotion.
100%
50%
75% 25%
100%
50%
75% 25%

44
EN
Scope of application of b-intense®infrared cabins
b-intense®infrared cabins consist of infrared radiators, control units and additional equipment for local, non-contact heat application via
back and front heater to reduce muscle tension and to help in the treatment of pain and tension therapies, to increase the body‘s defenses
and gain a positive effect on the skin.
Intended application
› The b-intense®infrared cabin is intended for infrared therapy according to the specified purpose.
› The product is intended for private use.
› Commercial use must be agreed upon with b-intense®.
› Intended application also includes fully reading and understanding the associated documentation and in particular these „safety
instructions“.
Not intended application
› Every use that doesn‘t comply with the intended application is not intended and therefore prohibited.
› The product must only be used with b-intense®licensed components. b-intense®is not liable for any damage occuring through
unintended use. The risks of unintended use lie within the operator/user.
General safety guidelines and use of the b-intense®
› Read the Operation Manual thoroughly including the medical acvide.
› Always check the b-intense®cabin for visual damage.
› Ensure the conformity of the electric connection with the specification on the nameplate.
› Ensure the proper connection and inspection of the shockproof socket.
› Ensure the proper protection and connection to a fault-current circuit breaker (FI) of the socket.
› Please do not locate the b-intense®in wet rooms, only in dry rooms (no condensing humidity).
› Never cover the infrared heaters!
› Keep easily flammable substances and fluids away from the infrared heaters.
› Don‘t leave the b-intense®operating unsupervised.
› In case of visual damage of the cabin contact b-intense®.
› Never open the electrical components of the b-intense®.
› In case of damage on the supply cable disconnect the b-intense®from the power supply and contact b-intense®.
› Don‘t modify or adapt the b-intense®!

45
EN
Notes for safe use
› Use the b-intense®infrared cabin according to the intended purpose defined in the operation manual.
› The b-intense®infrared cabin must be used with naked and at first dry back.
› The b-intense®infrared cabin MUST NOT be used without headrest and backrest.
› Open wounds, scars e.g. must be covered in the applicated areas.
› The surrounding temperature should not be lower than 18°C during application.
› Warm the b-intense®infrared cabin up to 25–28°C before starting for ideal results.
› Adjust the neck support so the back of your head rests centrally.
› Use less intensity (max. 50%) in the back heater in the beginning of the application for at least 5 minutes.
› Raise the intensity of the back heater after heating up in small measures (5-10% per 5 minutes), so you always feel a pleasant warmth
in the back.
› Reduce the intensity of the back heater for the last 5-10 minutes of application about 10% per 2 minutes.
› Enable enough air circulation between the back and the heater.
› Be careful not to touch the surface of the heater with your back.
› Watch out for a burning or painful feeling in the exposed area. Reduce the intensity if necessary.
› The b-intense®infrared cabin is not intended for face application. Make sure to keep a safe distance to the front heater and do not look
directly into the heater for more than 9 minutes. Use safety glasses if necessary (at least protection level 4-4 according to EN171).
› Always use a towel for sitting.
› Clean the cabin according to the instructions.
› NEVER cover the infrared heaters or their ventilation system.
Pay attention to all safety notices and application notes for your own safety!
Medical mode of action
Infrared radiation (IR radiation) is part of the electromagnetic spectrum. The most important natural source of IR radiation is the sun, about
54% of the solar radiation reaching the earth‘s surface is IR radiation. In addition, the human skin is increasingly exposed to artificial IR sources
in the cosmetic and wellness sector, but also in the medical field. The application of electromagnetic radiation for heat application is widely
used.
Infrared rays are absorbed by the uppermost skin layers and converted into heat. IR exposure is therefore perceived as heat. Due to the ther-
mal stress on the skin, the body reacts with heat defense reactions which are triggered gradually. The physiological response to heat depends
on the tissue temperature, the duration and extent of the temperature increase, the ambient temperature and the size of the irradiated area.
The human organism is able to keep its core body temperature relatively constant regardless of fluctuations in ambient temperature.This is due
to an efficient thermoregulation system, which acts as a negative feedback system to counteract deviations in the actual temperature value by
more than ±0.1% of the setpoint. When heated, there is an increase in skin circulation and sweat secretion. As the vessels dilate, more blood
can pass from the body core to the skin surface, the blood cools the skin and dissipates the heat. Deeper skin layers are not heated directly
by infrared radiation, but by heat conduction. The increased production of sweat results from the subsequent evaporation at the skin surface
to cool down and is therefore an important thermoregulatory mechanism. In addition, sweat also contributes to the optimal moisture supply
of the skin.

46
EN
Warnings and contraindications
Although every application of heat basically involves the risk of damaging the skin, infrared radiation offers the advantage of contactless heat
transfer, thus the natural defense reaction is least affected.
Normally, unpleasant sensations or slight pain in the irradiated area, which are already noticeable prior to burns, lead to behavioral changes
(we move away from the source of radiation), thus we are protected by our own natural averting reactions. In case of reduced or missing pain
sensation, e.g. also under the influence of alcohol and drugs, intake of tranquilizers and pain medication, thermal damage cannot be excluded.
In addition, persons who suffer from certain diseases and who are exposed to radiation may be at risk, even if the conditions are normally
considered as harmless.These include groups of people with limited thermoregulatory mechanisms, such as those suffering from cardiovascular
diseases and diabetes mellitus type 2.
The susceptibility to heat-related conditions is also increased when taking some medications (e.g. diuretics, antihistamines, antiepileptic drugs,
etc.), for those suffering from Sjögren‘s syndrome and skin diseases (e.g. ichthyosis, anhidrotic ectodermal dysplasia) because in these cases
sweating and thus the cooling effect on the skin is impaired.
In the case of extensive scars, too little heat may also be dissipated due to the reduced vascular supply. Special caution is also required in the
case of diseases which lead to increased metabolic activity and thus increased heat generation (status epilepticus, malignant hypertermia).
Scars in the applicated area should therefore be covered.
Since the DNA repair mechanism may be impaired, we advice against infrared application in the hours following sunbathing or solarium.
Elderly people react particularly sensitively to higher temperatures. This also applies to children. The chance of overheating is particularly high
for small children due to the bigger body surface compared to the body volume.
In case of acute injury/inflammation, the application of heat may lead to an increase in symptoms and should therefore be avoided.
Erythema ab Igne (heat melanosis)
Chronically higher skin temperatures can lead to pigment changes, which are known as Eythema ab Igne (EAI).The red-brown, net-like skin
changes have a good prognosis and mostly are a cosmetic diversification and no serious damage. Reddened skin is normal to a certain
degree and should decrease in 1-2 hours after finishing the application. The infrared cabin should be avoided until the natural skin tone
is fully recovered. In case of reddening of the skin for over 12 hours a doctor should be consulted. The skin structure could change perma-
nently and a heat melanosis could manifest, should the application continue despite the skin changes.

47
EN
b-control deluxe b-control basic b-control single
on/off
back
heater
front
heater
floor
heating infrared
programs
USB-port, loading station for external
devices (tablet, smartphone, etc.),
musik playback via USB-stick
volume
music
playback
light colour
selection
ventilation
back
heater
front
heater
floor
heating
display display
on/off
Every b-intense®infrared cabin is equipped with a control system which was developed
specifically for heat application through infrared heaters. The b-control operating panel is
always positioned close to the user seat.The control panel has a digital display. During the
entire application the values in your cabin can be read on this display as follows:
› Session runtime in minutes
› Current cabin interior temperature in Degrees Celsius
Operation of the b-control units
Starting up your b-intense®infrared cabin
Press the power button for 1 second to activate your b-intense®infrared cabin. By switching on, the following basic settings are auto-
matically activated:
› The back and front heater active within 2–3 seconds. The front heater heats up to 80% of its output, the back heater to 50%. The front
heater can be adjusted at any time via the control panel. The back heater can be increased after the 5 minute warm-up phase and reduced
from the start. The limit of 50% during the first 5 minutes allows the body to adjust optimally and gently to the heat supply and to increase
the efficiency of the application.
› LED coloured light (only included in b-control deluxe control unit)
› Floor heating at 100%
USB loading station for external
devices (tablet, smartphone, etc.)
infrared
programs
audio sources

48
EN
Function
Back heater
Front heater
Floor heating
Infrared programs
Fan
(fresh air system)
LED coloured light
Music
Volume
Audio*
Operation
Press the button once to adjust both backheaters at once, choose the intensity using the
buttons +/–. Press the button again to activate the regulation of only the right back-
heater (R), adjust the intensity using the buttons +/–. Press the button again to activate
the regulation of only the left backheater (L), adjust the intensity using the buttons +/–.
Notice: single person cabins only have one back heater, therefore the option of individual
adjustment of the heaters is not available.
Press the button once to adjust both frontheaters at once, choose the intensity using the
buttons +/–. Press the button again to activate the regulation of only the right front-
heater (R), adjust the intensity using the buttons +/–. Press the button again to activate
the regulation of only the left frontheater (L), adjust the intensity using the buttons +/–.
Notice: single person cabins only have one front heater, therefore the option of individual
adjustment of the heaters is not available.
Press the button once to activate the function foot warmth, adjust the intensity with the
buttons +/–.
Press the button once to reach the menu of the b-intense®infrared programs. For
operation see more on page 51.
Press the button several times to choose between the functions ON – AUTO – OFF. The
AUTO function activates the fan as soon as the internal temperature of the cabin exceeds
40°C.
Press the button once to activate the LED coloured light, select the preferred colour with
+/–.
Press the button once to activate Music Playback from the Micro SD card (in the power
module). Choose a file using the buttons +/–.
Press the button during Audio Playback to adjust the volume using +/–.
Choose from several options to listen to the music of your choice:
› Music directly from the integrated Micro SD card
› via the external AUX port: You need a 3,5 mm AUX cable to connect to your additional
device (AUX cable is not enclosed)
› via Bluetooth: Connect the control unit to your external device (smartphone, tablet).
Select the music using your music player on your external device. Selecting music via
the control unit and via the b-intense®moments app using the Bluetooth function is
not possible.
› via USB stick (not enclosed)
Additionally features ot the b-control deluxe
* The b-control deluxe plays mp3 and wav files. The memory size of the used USB stick should not exceed 32GB and must be formatted in
FAT16 and FAT32 file system. There cannot be more than 3000 music files in the main directory.
Control elements and functions on the control panel
AUDIO

49
EN
Effects of wellness supplements
The b-control enables integration of several additional features into the heat application. The following functions are available:
LED Mood light
Light affects our mood and promotes the general well-being of people in different ways, depending on the colour of the light. The
b-intense®coloured light system is a product made in Austria. The elegant light bar is placed straight in the cabin ceiling and spreads the
selected coloured light very pleasantly. In addition, there is an indirect light as background lighting for the cabin. The functions Light and
Music are operated via the b-intense®controls.
The human organism unconsciously reacts to colours, physiologically (concerning the body) and psychologically (concerning the soul). The
effect of colours is a very individual matter, allthough the physiological effects are prominent in the b-intense®infrared cabin.
The b-intense®colour light offers different options to choose from. Our recommendation: Choose only one colour per infrared application
to achieve the best result.
VIOLET for creativity & meditation.
BLUE for energy & vitality.
Tip: Use the colour blue especially in the morning.
RED for relaxation & peace.
Tip: Definitely use the colour red for application right before going to bed.
YELLOW for motivation & concentration.
GREEN for harmony & balance.
TURKIS for relaxation & inspiration.
WHITE for good mood and reading pleasure.
Sound application
Music has a direct effect on our nervous system and state of mind.Two speakers are integrated into the cabin ceiling to ensure the best sound,
whether you play the music from the SD card (included, with 10 songs in MP3 format) or your USB stick. Use the Bluetooth function to play
music from your smart device (smartphone, tablet,...).
* Notice: Please consider, that this information on the b-intense®colour light only concerns cabin models which are equipped with LED
coloured light.

50
EN
b-intense®moments App and Bluetooth function
Functions of the b-intense®moments app
› Convenient operation of all cabin functions
› Create your own profiles
› Create your own infrared program
› Query your personal statistics
› Listen to your own music from your device
› All kinds of interesting facts about infrared and b-intense®
How to start the app
Depending on whether you use Android (e.g. Samsung, Huawei) or iOS (Apple iPhone), you will find the b-intense®app in your restrictive app
store. Therefore, open the app store and search for „ b-intense“ or „b-intense moments“. You can open the app after downloading it. When
you first open the b-intense®app you will be given a brief introduction. First you need to define a user, so that statistics and self-created
programs can be assigned.
Connection to the infrared cabin
The b-intense®moments app looks for a cabin automatically. If no infrared cabin is found nearby, you can also use the app in offline mode,
e.g. to get statistics. If the connection to the infrared cabin cannot be established, check your Bluetooth settings and ensure that you have an
app-compatible b-intense®control. Your mobile device must be connected to the cabin in the Bluetooth settings.
Note: Apps working with Bluetooth Low Energy (BLE) need access to your location information. We ensure not to process or use information
on your location for other purposes.
Functions on the home screen
Your home screen gives you an overview of the functions of your cabin. The features of the control unit in the cabin are represented on the
home screen and can mostly be operated directly. In the operation instructions of your cabin you will find the exact features behind the nine
icons of the home screen. At the top left, you can access your profile and view user statistics. You can switch the cabin on and off at the top
right. At the bottom left in the „b-world“ you will find exciting news and tips for infrared application, as well as quotes and much more. The
status of your program is displayed on „Status“ at the bottom right. Here you can change the overall intensity if you wish. A big highlight of
the app is the creation of your own programs.
Functions of the USB-port
› Charging station for external devices like mobile phone, tablet
› With b-control deluxe: music playable in MP3 and wav format
Listening to music via Bluetooth
Would you like to listen to music from your smartphone in the cabin? Simply connect your smartphone with your infrared cabin via Bluetooth.
This function can only be used with an Bluetooth capable external device. This function is only usable in cabins equipped with the b-control
deluxe control unit of the latest generation.

51
EN
Infrared programs
Five infrared programs are available in a b-intense®infrared cabin, from which you can choose according to your daily condition and time
budget. Starting with a short heat load, vitalization and regeneration to the classics back and slim, you will surely find the right program.
Please note that these preset programs always only represent a statistic portion. They serve as an “introduction” and therefore are rather
moderate in the intensity. In the course of time you will notice how your own body reacts.The optimal choice of program depends on your per-
sonal well-being. Enjoy the programs which are developed by infrared experts and increase the effectiveness of your b-intense®application.
Alternatively, you can control the heaters individually as before and thus adapt them to your daily condition. If you want to adjust the intensity
level as too hot, reduce the intensity by pressing the back heater symbol and the minus symbol. If you want a higher intensity level, you can
adjust it by pressing the back heater symbol and the plus symbol. The entire infrared program is adjusted accordingly.
Please share your experiences with us and send us an email to [e-mail].
Description of the b-intense®infrared programs
Heatload
Duration: 15 minutes – Light colour: blue
The program „heat load“ is an optimal preparation for sports
or subsequent treatment (for example massage). The relatively
short, intense heat input is an adrenergic stimulation, activates
and provides heat to the distribution in the whole body. Connect-
ed with a prompt, sport-specific preparation, the program„heat
load“ may reduce the risk of injury and improve intramuscular
coordination. Exercises of physiotherapeutic concepts can also
work out more efficiently.
0 10 20 30 40 50
100
90
80
70
60
50
40
30
20
10
0
Intensity in %
Duration in minutes
0 10 20 30 40 50
100
90
80
70
60
50
40
30
20
10
0
Intensity in %
Duration in minutes
Vitalisation
Duration: 23 minutes – Light colour: yellow
The b-intense®user program “revitalization” stands for more
vitality and energy for the day. The intense heat input at the
back activates our organism. The onset of sweating indicates the
beginning of the warming of the body shell. Besides activation,
the focus is on the provision of heat energy for hours. You gain
strength and energy for the whole day with the “revitalization”
program. Accordingly, it is recommended to start with this
program for a successful day.

52
EN
0 10 20 30 40 50
100
90
80
70
60
50
40
30
20
10
0
Intensity in %
Duration in minutes
Back
Duration: 44 minutes – Light colour: yellow
„Back“ is the extensive and beneficial program to relieve tension
in the back. The course of the increase in radiation intensity is
specifically designed so that a higher proportion of the applied
heat can reach the back muscles using the direct heat conducti-
on. The focus is on muscle relaxation and pain relief in the back
area. We sit and a lot stand in our daily life, especially the back
and neck area is strained. With the b-intense®user program
„Back“ we can provide relief and relaxation.
Regeneration
Duration: 45 minutes – Light colour: green
We designed the program “regeneration” for recreation and for
inner peace after exertion, stress and noise. A slow increase of
the radiation intensity to average values with subsequent re-
duction of heat intensity avoids adrenergic stimuli, aims at mild
heating of the body shell, soothes and relaxes. The focus is on
a detonisation of the muscular structure and an improvement
in tissue repair. This program is suitable after sport as well as in
the evening. After a long, especially physically strenuous day this
program is especially recommended to let go and relax. We rec-
ommend changing to red light in the evening. 0 10 20 30 40 50
100
90
80
70
60
50
40
30
20
10
0
Intensity in %
Duration in minutes
Slim
Duration: 51 minutes – Light colour: yellow
The b-intense®infrared program “Slim” can be used to supple-
ment diets and weight loss. The gradual increase in the intensity
of radiation on high values aims at an efficient blood circulation
in the back area. The following maintaining of a high intensity le-
vel and the extension of application time provide maximum heat
input. The focus is on increasing the metabolism and increasing
the tissue flushing (perfusion). As a result these dietary measures
may support weight loss. (Note: No every diet aims at loosing
weight.)
0 10 20 30 40 50
100
90
80
70
60
50
40
30
20
10
0
Intensity in %
Duration in minutes

53
EN
Preheating (only with b-control deluxe)
Duration: 15 or 30 minutes, until 28°C are reached – no coloured light
Select one of the “Preheating” programs, if you want to preheat your b-intense®infrared cabin. All radiators are at maximum power and
warm the interior of the cabin up. After the time has run out or a temperature of 28°C is reached, the program automatically switches to the
normal operating mode and you can use your cabin. You can either select a programm or set the radiators as desired individually.
Note: We recommend this program if the room temperature is too cold for you. DO NOT use the cabin during this program.
The optimal choice of program depends on your personal well-being. Enjoy the user programs determined by infrared experts and increase the
effectiveness of your time in the b-intense®cabin. Always remember that you should adjust the radiator as individually as possible. In case
you do not want to use a program, adjust the intensity as desired at any time.
Creating an individual program via b-intense® moments app
Duration: up to 60 minutes – Light colour: freely selectable
Your program is not included? No problem, you can make your indidivudal program.
Just enter the b-intense®moments app, click on the program button and then
on the “+” symbol in the upper right corner to create a new program. You have the
possibility to choose your own background image, a name, a light colour and define
individual intervals and their intensity
Note: In the first 5-minute interval the intensity of the back heater must not exceed
50% (the so-called warm-up phase).This helps the body to warm up comfortably and
without any stress.

54
EN
The special program PREHEATING
Applications in your b-intense®infrared cabin have the best effect when the cabin temperature of is in the thermo-neutral zone of 28-38°C.
Therefore we recommend our customers to heat the cabin up to this temperature before starting a b-intense®user program. This program is
only available in b-intense®models equipped with the b-control deluxe.
The preheating time is very short and can be utilised to get ready for the cabin.
Prehating 15: 15 minutes
Preheating 30: 30 minutes
Timing-examples:
1-person cabin, starting temperature 21°C: 28°C in 14 minutes
2-people cabin, starting temperature 21°C: 28°C in 6 minutes
Activating the PREHEATING program
Press the program symbol and you enter the selection menu of the b-intense®infrared programs. Choose between preheating 15 and
preheating 30 and enter with the program button.
Status display
The display changes automatically to the status display of the PREHEARTING program:
› Remaining time of the program
› Current temperature in the cabin
› Warning message* “DO NOT USE!”
Finishing the program PREHEATING
After reaching a temperature of 28°C or after the chosen time the program automatically switches to the normal operating mode. The cabin
is now ready for your application.
Ensure that nobody is inside the cabin while preheating.
* Warning note: The cabin must not be used for application during the PREHEATING program!
Ensure that nobody is inside the cabin while preheating. The warning is also visible on the display.
The display flashes to draw attention to the warning. Failure to observe this warning may result
in overheating or combustion!