Baby Jogger CITY MINI 2 User manual

©2021 Baby Jogger NWL0000896346F 10/21
babyjogger.com
Stroller
ASSEMBLY INSTRUCTIONS
city mini®2

2
EN
3
2
4
5
66
8
11
13 14
15
6
16
18
1 Handlebar
2 Tether
3 Canopy
4 Auto-Lock
5 Harness Pads
6 Harness Buckle
7 Fold Strap
8 Rear Wheel
9 Rear Wheel Release Button
10 Parking Brake
11 Storage Basket
12 Front Wheels
13 Swivel/Lock Button
14 Swivel/Lock
15 Front Wheel Release Button
16 Footwell
17 Leg Support
18 Crotch Strap Pad
19 Seat Recline Strap
17
1
12
9
8
10
19
3
7

3
1
23
5
7
4
6
CLICK!

4
12
8
109
11
CLICK!
13
SNAP! SNAP!

5
17
14
16
18
15

6
24 25
19 20
21
22 23
CLICK!

7
28
27
SNAP!
29
26

8
31 32
33 34
35
A
B
30
CLICK!

9
40
39
38
37
B
A36
A
B
C
C

10
WARNING
IMPORTANT - Keep these instructions for
future reference.
Read these instructions carefully before use.
Your child’s safety may be aected if you do
not follow these instructions.
SINGLE STROLLER
• This stroller seats one passenger.NEVER
allow more than one child at a time on
this stroller.
• This seat unit is suitable for children from
birth to 22.5 kg (50 lb).Maximum weight
is 22.5 kg (50 lb); maximum height is
101.6 cm (40 in).
• Total weight load recommended for this
stroller is 28 kg (62 lb).22.5 kg (50 lb)
in the seat, 1 kg (2 lb) in the seat back
pocket, and 4.5 kg (10 lb) in the basket.
Excessive weight may cause a hazardous
unstable condition to exist.
• WARNING: TO AVOID INJURY OR
DEATH:
• ALWAYS APPLY THE BRAKES
WHENEVER THE STROLLER IS
STATIONARY.
• DO NOT LEAVE CHILDREN
UNATTENDED.
• SECURE THE CHILD IN THE HARNESS
AT ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR
BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF
ANY MOVING PARTS IF YOU ADJUST
THE STROLLER.
• WARNING: USE THE STRAP TO STOP
THE STROLLER ROLLING AWAY.
• WARNING: USE THE HARNESS AT ALL
TIMES.
• This stroller is not suitable for running,
jogging, skating or rollerblading.
• Always use the restraint system.
• Check that the pram body or seat unit
attachment or car seat attachment
devices are correctly engaged before use.
• WARNING: NEVER LEAVE THE
HARNESS BUCKLED WHEN NOT
FITTED TO A CHILD.THE HARNESS
CAN FORM LOOPS THAT POSE A
STRANGULATION HAZARD TO THE
CHILD.
• Accessories which are not approved by
the manufacturer or distributor shall not
be used.
• Do not let your child play with this
product.
• Parcels or accessory items, or both,
placed on the unit may cause the unit to
become unstable.
• Any load attached to the handle and/
or on the sides of the stroller aects the
stability and folding mechanism of the
stroller.
• Ensure that all the locking devices are
engaged before use.
• Lock the brakes before loading and
unloading your child and whenever the
stroller is not moving.
• Stroller is not meant to be used for
transporting children up or down stairs,
travelators, or escalators .Damage
resulting to stroller will not be covered
under warranty.
• Be aware of the risk of open fire and
other sources of strong heat, such as
electric bar fires, gas fires, heaters, etc, in
the near vicinity of the stroller.
• This stroller is designed for use on flat
or gently sloping surfaces.Be aware that
the possibility for tipping occurs if this
product is used on higher sloping and
uneven surfaces.
• Always keep fingers away from moving
parts when folding, unfolding, or adjusting
the stroller to prevent finger/body part
entrapment or pinching.
• To prevent injury, remove child tray or
belly bar accessory when folding or
unfolding the stroller.
• Before lifting and carrying the stroller,
make sure the storage lock is properly
secured.
• This stroller does not replace a cot or
a bed.Should your child need to sleep,
then it should be placed in a suitable
pram body, cot, or bed.
• Accessories which are not approved by
Baby Jogger shall not be used.
• The passenger shall remain seated (no
standing in the stroller).
• It may be unsafe to use replacement
parts other than those supplied or
approved by Baby Jogger.
EN

11
FRAME
1 Unpack the stroller frame from the box
and set the wheels aside.
Unlock the stroller by pulling the
storage lock lever.
2 Unfold the stroller by pulling the
handlebar away from the frame.Then
lift the handlebar away from the seat.
The stroller will lock into place and you
will hear a click.
3 Place the stroller in the upright position.
WARNING: Ensure that all the locking
devices are engaged before
use.
FRONT WHEEL
4 Installation
• Lay stroller on its back so the handlebar
is resting on the floor.
• Attach the front wheel by sliding it into
the front wheel mount until it clicks.
Gently pull on the front wheel to make
sure it is properly attached.
5 Removal
• While pressing the front wheel release
button, gently slide the front wheel out
of the front wheel mount.
SWIVEL FEATURE
6 Press the Swivel Lock button down
and slide the Swivel Lock to the left to
lock the front wheel assembly in a fixed
position for long distance strolling.
7 Press the Swivel Lock button down
and slide the Swivel Lock to the right
to allow the front wheel assembly to
swivel.
WARNING: When loading and
unloading child, lock the front wheel in a
fixed position.Although the front wheel
of your stroller locks, it is not intended
for jogging or exercise purposes.
REAR WHEELS
8 Installation
• Align the rear wheel axle with the wheel
mount on the stroller frame and insert
it into the wheel mount until it locks into
place.You will hear a click.
• Gently pull on the rear wheel to make
sure it is properly attached.
9 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount.
BRAKE
10 To lock the brakes: push the brake lever
down to engage the brakes.
11 To release the brakes: lift the brake lever
up.
WARNING: Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving.
CANOPY
12 Attach the canopy to the frame by
sliding the canopy onto the mounting
brackets. To remove, slide canopy o of
mounts.
NOTE: When using a Baby Jogger,
Graco or Britax car seat, the canopy
can be attached. For all other car seats,
canopy must be removed.
13 Snap the two snaps to the stroller
frame.
14 Zip the back of the seat to the canopy
top.
Attach the 2 fastening strips on the side
of the canopy.
15 Pull forward to open canopy and push
backwards to close canopy.
16 To use the canopy window, roll the
shade up towards the top and secure
with the elastic and button.
ADJUSTING SAFETY HARNESS
17 From the back of the seat, unfasten and
open the pocket to locate the plastic
square stopper. Turn stopper and pass
through the openings in the PE board
and seat fabric.
18 Reinsert stopper at seat opening closest
to child’s shoulders.Pass back through
seat fabric and PE board.Tug on strap
to ensure stopper is locked.Repeat on
both sides.
WARNING: Avoid serious injury from
falling or sliding out.Always properly
adjust and fasten safety harness.
EN

12
WARNING: Always use the crotch strap
in combination with the shoulder straps
and waist belt.
19 Slide the harness pads up to access
plastic guide on strap.
20 Hold the plastic guide and pull strap to
tighten or loosen.
USING SAFETY HARNESS
21 Insert side strap buckle into harness
buckle on both sides.
22 Insert connected harness and side strap
buckles into the sides of the crotch
buckle.
23 Press button on crotch buckle to
release.
RECLINE THE SEAT
24 Pinch the clamp behind the seat, and
slide it down to desired recline.
25 Pull seat down on both sides to match
the clamp position.Reverse steps to
return to the upright position.
WARNING: When making adjustments
to the stroller seat, make sure child’s
head, arms, and legs are clear of moving
seat parts and stroller frame.
26 For extra ventilation, roll up the seat
back flap and secure with elastic and
button.
LEG SUPPORT
27 To use the leg support, lift the front of
the seat pad.
28 Rotate the support arm out and lower
the seat pad. Lock the support arm.
29 To lower leg support, reverse the steps.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all items
from basket.
WARNING: To prevent injury, remove
Child Tray or Belly Bar accessory when
folding or unfolding the stroller.
30 A.Insert finger into loop and pull up,
then B. Pull up on the “Pull to Fold”
folding handle and let the frame
collapse.
31 Make sure the auto-lock lever clicks into
place.
BASKET REMOVAL
32 From the front of the stroller, unsnap
the 2 snaps and pull the straps out of
foot well.
33 Lift basket o the hook.
34 From the back, lift the top of basket o
the tab on both sides of frame.
35 Remove the strap from the C clamp on
both sides of frame.
REMOVING THE SEAT PAD
36 Flip the stroller over to expose the seat
bottom.
AUnfasten the 2 fastening strips and
pull them out of the stroller frame.
BUnfasten the fastening strip and pull
them out of the sides of the stroller
frame.
CUnscrew the right carabiner hook and
pull strap out from the seat pad.
37 Flip the seat back over on its wheels.
Pull seat fabric up and o of buttons.
38 Starting from the bottom, slide the seat
pad out from stroller frame on both
sides.
39 From the top, slide the seat pad out of
the frame on both sides.
40 Remove seat pad.
Reverse the steps to reattach the seat pad
to the frame.
EN

13
CARE AND MAINTENANCE
To preserve the longevity of your stroller,
it is important to perform simple, regular
maintenance.From time to time, make sure
that the joints and folding areas are still in
good condition.If you hear any squeaking
or feel tension, you can take your stroller
to a local bike shop for added lubrication.
All repairs should only be carried out by an
authorized dealer.
WASHING
Seat Fabric
• You can hand wash your stroller’s seat in
cold water with a mild detergent.
• Be sure to remove the metal frame and
PE boards from the seat before washing.
• Do not use solvents, caustic or abrasive
cleaning materials.
• To minimize shrinkage, simply reattach
the seat to the frame to dry.
• Do not press, iron, dry clean, tumble dry
or wring the fabric.
• If the seat covers need to be replaced,
only use parts from a Baby Jogger
Authorized Dealer.They are the only ones
that are guaranteed to have been safety
tested and designed to fit this seat.
• DO NOT machine wash your stroller’s
canopy.
Plastic/Metal Parts
• Wipe clean using a mild soap and warm
water.
• You must not remove, dismantle or alter
any part of the seat folding mechanism
or brakes.
Wheel Care
• The wheels can be cleaned using a
damp cloth.They will need to be dried
completely with a soft towel or cloth.
STORING
• Sunshine can fade seat fabric and dry out
tires, so storing your stroller indoors will
prolong its good looks.
• DO NOT store outside.
• Ensure that the stroller is dry before
storing for prolonged periods.
• Always store the stroller in a dry
environment.
• Store the stroller in a safe place when
not in use (i.e.where children cannot play
with it).
• DO NOT place heavy objects on top of
the stroller.
• DO NOT store the stroller near a direct
heat source such as a radiator or fire.
EN

14
PLEASE DO NOT CONTACT THE PLACE OF PURCHASE FOR PARTS OR WARRANTY ISSUES
Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the
product.Manufacturer’s defects include but are not limited to the breaking of welds and frame
tube damage.Textile or soft side materials and all other components shall be warranted for
one year from the date of purchase (except for tubes and tires).Proof of purchase is required
to make a warranty claim and the warranty is only extended to the original purchaser.
Your stroller comes with a limited lifetime warranty on the frame and a 12 month warranty on
textiles and mechanical components.Visit www.babyjoggerstrollers.com.au to register your
new stroller and we’ll extend your warranty by a further 12 months.
THIS WARRANTY DOES NOT COVER:
• Normal wear and tear
• Corrosion or rust
• Incorrect assembly, or the installation of third party parts or accessories not compatible
with the original design.
• Accidental or intentional damage, abuse or neglect, or use on stairs, travelators or
escalators.
• Commercial use
• Improper storage/care of the unit
This warranty specifically excludes claims for indirect, incidental, or consequential damages.
The implied warranties of merchantability and fitness for a particular purpose is according to
the specific warranty period for this model unit at time of purchase.Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.To know what your legal rights are in
your state, consult your local or state consumer aairs oce or your State’s Attorney General.
The benefits given to you by our warranty are in addition to other rights and remedies
under law in relation to the product. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.Our goods also come with guarantees that
cannot be excluded under the New Zealand Consumer Guarantees Act.You are entitled
to a replacement or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
NOTE: When contacting Baby Jogger distributor regarding your stroller,
please have your stroller’s serial number ready.It can be found on the
crossbar above the basket.
IN AUSTRALIA CONTACT:
Call: 1300.661.885
Fax: [phone]
Mail: The Amazing Baby Company
7-9 Maurice Court
Nunawading, Victoria 3131
Australia
IN NEW ZEALAND CONTACT:
Call: (64) 03.338.7613
Fax: [phone]
Mail: Baby First Limited
25 Nga Mahi Road
Sockburn Christchurch, 8024
New Zealand
Baby Jogger’s Limited Lifetime Warranty:
EN

15

The Amazing Baby Company
7-9 Maurice Court • Nunawading VIC 3131 • Australia
Tel.[phone] - Tel.[phone] • [e-mail]
www.babyjogger.com.au
Baby First Limited
25 Nga Mahi Road • Sockburn Christchurch, 8042 • New Zealand
Tel.[phone] • www.babyjogger.co.nz
Baby Jogger, LLC
6655 Peachtree Dunwoody Rd.NE • Atlanta, GA 30328
1.800.241.1848 • www.babyjogger.com