Baby Jogger City tour 2 User manual

©2018 NWL0000880827A 10/18
babyjoer.com
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D’ASSEMBLAGE
INSTRUCCIONES DE MONTAJE
ISTRUZIONI PER IL MONTAGGIO
GEBRAUCHSANLEITUNG
NÁVOD K SESTAVENÍ
SAMLINGSANVISNINGER
KOKOAMISOHJEET
ΟΔΗΓΙΕΣ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ
UPUTE ZA SASTAVLJANJE
ÖSSZESZERELÉSI UTASÍTÁSOK
MONTAGEINSTRUCTIES
MONTERINGSANVISNING
INSTRUKCJA MONTAŻU
INSTRUÇÕES DE MONTAGEM
INSTRUCȚIUNI DE ASAMBLARE
ИНСТРУКЦИИ ПО СБОРКЕ
UPUTSTVA ZA SASTAVLJANJE
NÁVOD NA MONTÁŽ
NAVODILA ZA SESTAVO
MONTERINGSINSTRUKTIONER
MONTAJ TALİMATLARI
IMPORTANT: Read carefully and keep for future reference. Your child’s safety may be aected if you
do not follow these instructions.


2
1
17
1 Handlebar 10 Swivel/Lock
2 Canopy 11 Front Wheel
3Canopy Extension 12 Handlebar Fold Release Button
4Harness Pads and Buckle Pad 13 Handlebar Fold Button
5Harness Buckle 14 Parkin Brake
6Rear Wheel 15 Rear Wheel Release Button
7Storae Basket 16 Front Wheel Release Button
8Le Support 17 Auto-lock
9 Footwell
13
EN
15
14
16
12
6
7
11
10
8
5
4
3
2
9

3
1 Handlebar 10 Swivel/Lock
2 Canopy 11 Front Wheel
3Canopy Extension 12 Handlebar Fold Release Button
4Harness Pads and Buckle Pad 13 Handlebar Fold Button
5Harness Buckle 14 Parkin Brake
6Rear Wheel 15 Rear Wheel Release Button
7Storae Basket 16 Front Wheel Release Button
8Le Support 17 Auto-lock
9 Footwell
1
2
3 4
5 6
CLICK
CLICK

4
8
9 10
11 12
7
13 14
CLICK

5
15 16
17
18 19
20

6
21 22
23 24
25
27
26

7
30
28 29
1
2
31
32
CLICK
33
34 35

8
3736

9
WARNING
IMPORTANT - Read carefully and keep for
future reference.
Your child’s safety may be aected if you
do not follow these instructions.
WARNING
• Never leave the child unattended.
• Always use the restraint system.
• This product is not suitable for runnin or
skatin
• Ensure that all the lockin devices are
enaed before use.
• To avoid injury, ensure that the child is
kept away when unfoldin and foldin
this product.
• Do not let the child play with this
product.
• Check that the pram body or seat unit or
car seat attachment devices are correctly
enaed before use.
ADDITIONAL SAFETY INFORMATION
• This stroller seats one passener.NEVER
allow more than one child at a time on
this stroller.
• The seat unit is suitable for one child from
birth up to 22 k.
• Total weiht load recommended for this
stroller is 27 k. 22 k in the seat, and 5
k in the basket. Excessive weiht may
cause a hazardous unstable condition to
exist.
• Parcels or accessory items, or both,
placed on the unit may cause the unit to
become unstable.
• Any load attached to the handle and/
or on the back of the backrest and/or
on the sides of the vehicle will aect the
stability of the vehicle.
• For new born babies we recommend
always to use the most reclined seat
position.
• Lock the brakes before loadin and
unloadin your child and whenever the
stroller is not movin.
• Ensure that the brake is properly
enaed by movin the stroller slihtly
back and forth.
• Stroller is not meant to be used for
transportin children up or down stairs or
escalators.Damae resultin to stroller
will not be covered under warranty.
• This stroller does not replace a cot or
a bed.Should your child need to sleep,
then it should be placed in a suitable
pram body, cot, or bed.
• Accessories which are not approved by
Baby Joer shall not be used.
• Watch out for cars - never assume that a
driver can see you and your child.
• The passener shall remain seated (no
standin in the stroller).
• Use only replacement parts supplied or
approved by Baby Joer.
max 22 kg
EN

10
FRAME
1 Unpack the stroller frame from the
box and set the wheels aside.
Unlock the stroller by pullin the
auto-lock lever.
2 Pull the lower front frame of the
stroller away from the rear les.
Then, lift the seat back frame
upwards from the rear les. Lastly,
unfold the handlebar upwards.The
stroller will lock into position and
you will hear a click.
3 Place the stroller in the upriht
position.
WARNING: Ensure that all the
lockin devices are enaed before
use.
FRONT WHEEL
4 Installation
• Attach the front wheel by slidin
it into the front wheel mount until
it clicks.Gently pull on the front
wheel to make sure it is properly
attached.
5 Removal
• While pressin the front wheel
release button, ently slide the
front wheel out of the front wheel
mount.
SWIVEL FEATURE
6 Push the swivel lock button up
to lock the front wheel to a fixed
position.
7 Press the swivel lock button down
to allow the front wheel assembly to
swivel.
WARNING: When loadin and
unloadin child, lock the front wheel
in a fixed position.Althouh the
front wheel of your stroller locks, it is
not intended for join or exercise
purposes.
REAR WHEELS
8 Installation
• Alin the rear wheel axle with the
wheel mount on the stroller frame
and insert it into the wheel mount
until it locks into place.You will
hear a click.
• Gently pull on the rear wheel to
make sure it is properly attached.
9 Removal
• While pressin down on the wheel
release button, ently slide the rear
wheel out of the wheel mount.
BRAKE
10 To lock the brakes: push the brake
lever down to enae the brakes.
11 To release the brakes: lift the brake
lever up.
WARNING: Lock the brakes before
loadin and unloadin your child and
whenever the stroller is not movin.
CANOPY
12 Pull forward to open canopy, push
backwards to close canopy.
13 To use the canopy extension: Pull
the extension out from under the
canopy until it snaps into place,
push the extension under the main
canopy to hide.
ADJUSTING SHOULDER STRAPS
14 From the back of the seat, undo the
fastenin strip and open the pocket
to locate the plastic square stopper.
Turn stopper and pass throuh the
openins in the Plastic board and
seat fabric.
15 Reinsert stopper at seat openin
closest to child’s shoulders.Pass
back throuh seat fabric and plastic
board.Tu on strap to ensure
stopper is locked.Repeat on both
sides.
WARNING: Avoid serious injury from
fallin or slidin out.Always properly
adjust and fasten safety harness.
EN ENEN

11
EN WARNING: Always use the crotch
strap in combination with the
shoulder straps and waist belt.
16 Slide the harness pads up to access
plastic uide on strap.
17 Hold the plastic uide and pull strap
to tihten or loosen.
USING SAFETY HARNESS
18 Insert side strap buckle into harness
buckle on both sides.
19 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
20 Press button on crotch buckle to
release.
RECLINE THE BACKREST
21 Pinch the clamp behind the
backrest, and slide it down to
desired position.
22 Pull backrest down on both sides to
match the clamp position.Reverse
steps to return to the upriht
position.
WARNING: When makin
adjustments to the stroller seat,
make sure child’s head, arms, and
les are clear of movin seat parts
and stroller frame.
LEG SUPPORT INCLINE
23 Lift the le support up in order to
raise it.
24 To lower the le support, pull the
release bar underneath it and push
it down.
BASKET REMOVAL
25 From underneath the stroller,
unfasten the snaps of the basket
near the rear of the stroller.
26 At the rear of the stroller, push up
on the hanin clips to remove
them from the stroller frame.
27 From under the front of the stroller,
unfasten and unloop the two snaps.
28 Pull the basket fabric out of the
channels in the footwell.
FOLDING
• Remove your child from the seat.
• Remove all attachments and all
items from basket.
29 Slide the handlebar fold release
button and hold it, then squeeze the
fold button on the handle bar and
fold the handlebar forward.
30Fold the upper stroller frame down
to the lower stroller frame.
31 Pull up on the strap on the seat and
let the frame collapse.
32 Make sure the auto-lock lever clicks
into place.
REMOVING THE SEAT FABRIC
33 From the underside of the seat,
unfasten the hook-and-loop and
slide the strap throuh the D-rin.
34 Unfasten and unloop the two snaps
underneath the seat.
35 Undo the fastenin strip underneath
the le support.
36 Undo the six fastenin strips on the
back of the seat.
37 At the top of the seat, pull the seat
fabric out of the channels in the
frame.
WARNING: Make sure that all
fasteners are properly closed when
re-attachin the seat fabric.
EN EN

12
CARE AND MAINTENANCE
To preserve the lonevity of your stroller,
it is important to perform simple, reular
maintenance.From time to time, make sure
that the joints and foldin areas are still in
ood condition.If you hear any squeakin
or feel tension, you can take your stroller
to a local bike shop for added lubrication.
All repairs should only be carried out by an
authorized dealer.
WASHING
Seat Fabric
• You can machine wash your stroller’s
seat in cold water with a mild deterent.
• Be sure to remove the metal frame
and Plastic boards from the seat before
washin.
• Do not use solvents, caustic or abrasive
cleanin materials.
• To minimize shrinkae, simply reattach
the seat to the frame to dry.
• Do not press, iron, dry clean, tumble dry
or wrin the fabric.
• If the seat covers need to be replaced,
only use parts from a Baby Joer
Authorized Dealer.They are the only
ones that are uaranteed to have been
safety tested and desined to fit this
seat.
Plastic/Metal Parts
• Wipe clean usin a mild soap and warm
water.
• You must not remove, dismantle or alter
any part of the seat foldin mechanism
or brakes.
Wheel Care
• The wheels can be cleaned usin a
damp cloth.They will need to be dried
completely with a soft towel or cloth.
STORING
• Sunshine can fade seat fabric and dry
out tires, so storin your stroller indoors
will prolon its ood looks.
• DO NOT store outside.
• Ensure that the stroller is dry before
storin for proloned periods.
• Always store the stroller in a dry
environment.
• Store the stroller in a safe place when
not in use (i.e.where children cannot
play with it).
• DO NOT place heavy objects on top of
the stroller.
• DO NOT store the stroller near a direct
heat source such as a radiator or fire.
EN ENEN

13
EN
Baby Joer warrants that the frame is free of manufacturer defects for the lifetime of
the product. Manufacturer’s defects include but are not limited to the breakin of welds
and frame tube damae. Textile or soft side materials and all other components shall be
warranted for one year from the date of purchase (except for tubes and tires). Proof of
purchase is required to make a warranty claim and the warranty is only extended to the
oriinal purchaser.
THIS WARRANTY DOES NOT COVER:
• Normal wear and tear
• Corrosion or rust
• Incorrect assembly, or the installation of third party parts or accessories not compatible
with the oriinal desin
• Accidental or intentional damae, abuse or nelect, or use on stairs or escalators.
• Commercial use
• Improper storae/care of the unit
This warranty specifically excludes claims for indirect, incidental, or consequential
damaes. The implied warranties of merchantability and fitness for a particular purpose
is accordin to the specific warranty period for this model unit at time of purchase. Some
states do not allow the exclusion or limitation of incidental or consequential damaes, so
the above limitations or exclusions may not apply to you. This warranty ives you specific
leal rihts, and you may also have other rihts which vary from state to state. To know
what your leal rihts are in your state, consult your local or state consumer aairs oce
or your State’s Attorney General.
If your stroller was purchased outside of the United States, please contact the distributor in
the country nearest you. Their contact information can be found on our website at http://
www.babyjogger.com/retailers/#international. Claims for warranty outside of the country
in which the product was purchased may incur shippin chares.
NOTE: When contactin Baby Joer distributor reardin your stroller,
please have your stroller’s serial number and model number ready.
They can be found on the inside of the rear le.
Baby Jogger’s Limited Lifetime Warranty:
EN EN